Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Commissioning

5.7 Commissioning with SIWATOOL

All parameter settings in DR10 are now identical again between PC and SIWAREX, and all
parameters of DR10 are displayed again in black.
Following transmission of the parameters to the SIWAREX, and with a empty scale – i.e.
only the mechanical dead load (e.g. empty container) bears on the load cells – the
"Automatic calibration" command is executed:

SIWAREX WP521/WP522
Manual, 04/2016, A5E36695225A 61

You might also like