Professional Documents
Culture Documents
Trident Build Guide
Trident Build Guide
Trident Build Guide
Drill all holes with the appropriate sized drill before pressing in pins
Harbor Freight spring kit can be used for many springs on this build
Brace front catch (hinge) - 3/8" x 3/4" compression
Brace rear catch (slide) - 9/32" x 1/2" compression (x3/4" would work too, if you want it stiffer)
Mag release - 1/4" x 13/32" compression yields a fairly spongy release. 7/32" x 11/16" is stiffer but felt/sounded a little scrapey on the threads of the screw
fi
Assemble Brace
Place spring under brace button Endcap
Press 3mm X 10mm pin into brace rear Button
Place 7mm x 10mm spring under Brace Rear
release, use M3 X 25mm pin to secure
release to brace front
Release
Attach endcap to brace assembly
using M4x50 (you will have to drill to t)
Brace front
Note: if brace is loose use athletic tape
to reduce rattle
fi
Assemble Magwell
Magwell Mag Release
7mm OD x 10mm Spring
M3 x 25 CSS
M3 x 50 CSS
Mag Release Pivot
Assemble Lower
Slide safety into lower. Use (2)
1.5mm x 28mm piano wire to
secure the safety to the lower Safety
(1) 3mm x 35mm pin Lower
(1) 3.5mm x 35mm pin
zer0fux Gator8tor
Querent
300_blackout Justan Otherguy
Sniper69
shoe3 Justinhates
Tguinan86
Carbon bergoth Lost 10mm
Echo OA
fi