Professional Documents
Culture Documents
IoT Based Smart Plug
IoT Based Smart Plug
IoT Based Smart Plug
CERTIFICATE
This is to certify that the report entitled Project Report Title submitted by Stu-
dent A (Reg. No. SJC1XEC0XX), Student B (Reg. No. SJC1XEC0XX), Stu-
dent C (Reg. No. SJC1XEC0XX) and Student D (Reg. No. SJC1XEC0XX),
Seventh Semester B.Tech Electronics and Communication Engineering students,
is a bonafide record of the Project Phase - 1 done by them, under our guidance and
supervision, in partial fulfillment of the requirements for the award of the degree,
B.Tech Electronics and Communication Engineering of APJ Abdul Kalam
Technological University, Kerala.
Acknowledgment
(You can specify the acknowledgement as you like to express. But you have
to express acknowledgement towards Principal, HoD, Coordinators, Guide,
any others you would like to, without mistake in their name.The following is
a sample only. Those who would like to modify it in their own style may do
it.)
I wish to record my indebtedness and thankfulness to all who helped me prepare
this Project Phase - I Report titled Project Report Title and present it in a satis-
factory way.
I would like to convey my special gratitude to Dr. V.P. Devassia, Principal,
SJCET, Palai,for the moral support he provided. I express my sincere thankful-
ness to Dr. Arun. P, Head of the department,Department of Electronics and
Communication Engineering for his co-operation and valuable suggestions. Also
I express my sincere thanks to project co-ordinators Dr. Arun. P and Mr. Anto
Manuel for their helpful feedback and timely assistance.
I am especially thankful to my guide Guide,Assistant Professor, Department
of Electronics & Communication Engineering for giving me valuable suggestions
and critical inputs in the preparation of this report.
I also extend my thanks to all my friends who helped me by giving motiva-
tion. Their smallest piece of advice was really valuable. Once again I convey my
gratitude to all those persons who had directly or indirectly influenced my work
as a whole.
Student A
Student B
Student C
Student D
Abstract
Here you are expected to give an executive summary of the whole report written
in one paragraph.
This is only filler material. This is an outline, a template, for preparing [1, 2]
reports. The instructions given herein are to be followed [3].
Contents
Certificate i
Acknowledgement ii
Abstract iv
Contents vi
1 Introduction 1
1.1 Sub-Chapter(if any) . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Sub-Chapter (if any) . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Literature Review 5
4 Design 7
8 Conclusions 11
Bibliography 12
Index 13
List of Tables
List of Figures
1.1 flower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 TEXflower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 TEXLion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 1
Introduction
”From here onwards, you are expected to present the report contents in dif-
ferent Chapters as explained in the class, beginning with Introduction Chap-
ter, Literature review, Finalization of Target Requirements, etc. In this chap-
ter, please include the mission statement, main objectives and scope, targeted
customers etc. Give a brief note on various software/hardware tools used for
design and development along with the application/use in the project. The
following material is filler material to show how the figures, tables, headings
etc is to be put. Please remember to cite the tables, figures, etc in the text
matter before it appears in the report body.” Also give here, the style of cita-
tion which you mentioned in the Abstract.
Lorem Ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tem-
por incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis
nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fu-
giat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa
qui officia deserunt mollit anim id est laborum.
magni dolores eos, qui ratione voluptatem sequi nesciunt, neque porro quisquam
est, qui dolorem ipsum, quia dolor sit amet, consectetur, adipisci[ng] velit, sed
quia non numquam [do] eius modi tempora inci[di]dunt, ut labore et dolore mag-
nam aliquam quaerat voluptatem. Ut enim ad minima veniam, quis nostrum ex-
ercitationem ullam corporis suscipit laboriosam,
nisi ut aliquid ex ea commodi consequatur? Quis autem vel eum iure reprehen-
derit, qui in ea voluptate velit esse, quam nihil molestiae consequatur, vel illum,
qui dolorem eum fugiat, quo voluptas nulla pariatur?
rum facilis est et expedita distinctio. Nam libero tempore, cum soluta nobis est
eligendi optio, cumque nihil impedit, quo minus id, quod maxime placeat, facere
possimus, omnis voluptas assumenda est, omnis dolor repellendus. Temporibus
autem quibusdam et aut officiis debitis aut rerum necessitatibus saepe eveniet, ut
et oluptates repudiandae sint et molestiae non recusandae. Itaque earum rerum
hic tenetur a sapiente delectus, ut aut reiciendis voluptatibus maiores alias conse-
quatur aut perferendis doloribus asperiores repellat...
Chapter 2
Literature Review
Please give a brief account of related works published in the literature. Also
include all these papers/materials in the references and give citations appro-
priately.
Chapter 3
Here you are expected to give the procedure followed by you in ideation phase
till the Target specs, elementary block diagram or similar document.Those
who are doing research oriented projects can modify the title or include this
part in chapter 2 as its basically the extension of some public work.
Chapter 4
Design
Here you can explain the detailed design and devlopment of the final concept
based on the elementary block diagram and explain the hardware design,
software design which include flow charts, detailed algorithm, sequence di-
agram etc. Those who are ready with use-case diagrams can take that as a
starting point.
Chapter 5
Chapter 6
Give important results,final photos, graphs etc. and your comments on it.
Conclusions and Future Scope for Improvement.
Chapter 7
Chapter 8
Conclusions
Bibliography
[2] Y. Song, L. Zhang, S. Chen, D. Ni, B. Y. Lei, and T. Wang, “Accurate seg-
mentation of cervical cytoplasm and nuclei based on multiscale convolu-
tional network and graph partitioning,” IEEE Transactions on Biomedical
Engineering, vol. 62, pp. 2421–2433, 2015.