Ordering Information engine oils is important to maintain the ability of the lubricant to OTK-CT-11202 neutralize acids resulting from Standard BN Test Kit (for system oil) combustion. Range: 1-180 BN
Oil Condition Monitoring
To avoid acid corrosion inside a Accuracy: Typically +/- 5 % of fresh oil BN combustion engine it is essential to Dimensions: Ø 68 mm x 84 mm maintain a certain alkalinity reserve. Weight: 490 g Additives (mostly calcium) are added Test Time: 5 minutes to the oil to neutralize any acid which Memory: last 10 readings for each might build up during the combustion individual oil process. Reagents: non hazardous
Normally the BN of an engine lube oil
OTK-CT-11214 decreases with the running hours. In CDO BN Test Kit (for cylinder drain oil) two stroke engines the circulation oil Range: 1-180 BN CMT Electronic BN TouchCell gets contaminated with leaking cylinder Accuracy: Typically +/- 5 % of fresh oil BN oil which has a much higher BN. This Dimensions: Ø 68 mm x 84 mm leads to a steep increase of the BN value Weight: 490 g of the engine system oil. Test Time: 5 minutes The CMT BN Test Kit provides state of Memory: last 10 readings for each the art analysis and gives fast, accurate individual oil results within a couple of minutes. Reagents: non hazardous
The Standard BN Test Kit has been
OTK-CT-11217 developed for all standard applications BoB BN Test Kit like testing the system oil used in all (for blending, cylinder drain oil) kinds of diesel engines and the CDO BN Range: 1-500 BN Test Kit has been specially developed to Accuracy: Typically +/- 2% or +/- 3 of test the scraped down cylinder drain oil fresh oil BN in two stroke crosshead engines. Dimensions: Ø 68 mm x 84 mm The CDO BN Test Kit software has been Weight: 490 g developed specifically to give reliable Test Time: 5 minutes results despite the fact that used drain Memory: last 10 readings for each oil may have dropped down to only 10% individual oil BN Reagent BN reserve left compared to the fresh Reagents: non hazardous oil. Reagent & Spares The CMT BoB BN Test Kit allows to test the base number of cylinder oils OTS-CT-13002: blended on board. It will report the BN Spare BN TouchCell of the blend as well as the mixing ratio. Furthermore the BOB BN Cell allows to OTS-CT-13027: test the remaining BN of the drain oil Spare CDO BN TouchCell and the remaining BN of the system oil. OTS-CT-13006: For easier handling it allows to store Spare BOB BN TouchCell Electronic BN TouchCell calibration for 5 different system oils OTS-CT-13004 and 3 different cylinder oils for drain oil Set of O-Rings for TouchCell testing. SW-C00004-CT Following Test Kits are available: Download Option TouchCell Standard BN - for system oil only License for Datadownload
CDO BN - for cylinder drain oil only
BoB BN - for system oil, cylinder drain oil and blending