Professional Documents
Culture Documents
Machine Tools Mid 1 Objective Question Bank 2023-24
Machine Tools Mid 1 Objective Question Bank 2023-24
1
d)none of the above
11 Which of the following is false?
. a) Weight of capstan lathe is lower than turret lathe.
b) Turret lathe used for shorter workpiece.
c) Turret is mounted directly on saddle in turret Lathe machine.
d) Turret head cannot move cross wise in Capstan lathe.
12 Producing circular hole in a solid metal by means of revolving tool is known as
. a)Drilling b)Reaming c)Boring d)Counter boring
13 Cutting of material during slotting operation takes place in
. a) Backward stroke b) Forward stroke
c) Both forward and backward stroke d) None of the mentioned
14 The rigidness of Radial drill machine is______ column drill machine.
. a) less than b) more than c)same as d) none
15 Which of the following part of slotting machine carries table elevating mechanism?
. a) Base b) Column c) Ram d) Table
16 Which one of the following g is the highest level of automation?
. a) enterprise level b) machine level c) cell level d) plant level
2
20 The programmable automation is highly suitable for
. a) job shop production b) mass production c) batch production d) none
3
27 Dead centre is housed in
. (a) Tailstock (b) Head stock (c) Carriage (d) Apron
28 A collet chuck is used for holding
. (a) Cylindrical work piece to locate the axis of rotation quickly
(b) Eccentric work piece to locate the axis of rotation quickly
(c) Square bar to locate the axis of rotation quickly
(d) Any type of work piece to locate the axis of rotation quickly
29 Turning operation in lathe is used for producing
. (a)A cylindrical surface (b) A plane surface (c) A tapered surface (d) A hole
30 Process of enlarging the hole size and enhancing its surface finish is known as
. a) Drilling b) Reaming c) Boring d) Counter boring
4
38 a) the tool is stationary and work reciprocates
. b) work is stationary and tool reciprocates
c) the tool moves over stationary work
d) the tool moves over reciprocating work
39 Multiple tool heads are used in following machine
. (a) Shaper (b) Slotter (c) Planer (d) Boring
40 The size of the planer is specified by the
.
a) maximum length of the stroke b) height of tool post
c) height of its bed d) all of the above
41 The point angle of a drill is
(a) 590 (b) 1180 (c) 120 to 150 (d) 1800
42 The drill consists of grooves are generally called
(a) Flutes (b) Margins (c) Lips (d) Clearances
43 Which of the following operations are not performed by drilling
(a) Facing (b) Boring (c) Tapping (d) Turning
44 The drilling machine used in constructional work is
(a)Bench drilling machine (b) portable drilling machine
(c) gang drilling machine (d) multiple spindle drilling machine