Professional Documents
Culture Documents
Carbon Graphite Component by Helwig Carbon
Carbon Graphite Component by Helwig Carbon
Carbon Graphite Component by Helwig Carbon
Self-Lubricating Carbon-Graphite
Components
Seals | Bearings | Bushings | Vanes
www.helwigcarbon.com
Helwig Carbon Products, Inc. – USA | 8900 West Tower Avenue | Milwaukee, WI 53224-2849
MCB 2012
Advantages of Carbon Graphite: Carbon Graphite Carbon Graphite Bearings & Bushings Carbon Vanes
Self lubricating Seals and Steam Joints Self lubricating carbon graphite bushings are ideal for applications Precision machined carbon
Carbon Graphite is the ideal where normal lubricants cannot be used. vanes with tight geometric
Low coefficient of friction
seal material in every aspect. Carbon graphite is also lubricated by tolerances of up to +/- 0.0005”
Resistance to chemicals, corrosion, and oxidation
Self lapping and flexible enough almost any fluid, so any media at the are maintained for greater
Excellent thermal conductivity interface of the bearing and shaft perpendicularity and
to conform to the mating face,
Excellent mechanical strength will offer additional lubrication. parallelism, resulting in
very hard, self lubricating and
Low coefficient of thermal expansion resistant to wear. It is also ■ Non galling and non seizing optimal product efficiency.
Excellent thermal shock capabilities lubricated by almost any fluid, ■ Low density Specialized equipment
Compatible with food & pharmaceuticals so the media being sealed will add additional lubrication. ■ High temperature resistance enables part-to-part
Low wear rate It is impervious and resistant to most chemicals. Applications include: consistency throughout the
■ Dimensional stability under wide temperature variations ■ Areas where conventional production process. Custom part orders of fewer than 50 pieces
can be shipped in 3 days or less.
Typical Applications: ■ Mates to a wide variety of materials
lubricants could contaminate
Chemical pumps Applications include: the product Applications include:
■ Automotive
Food processing pumps ■ Steam joints ■ Locations inaccessible for lubrication ■ Packaging
■ Aerospace
■ Seals for pumps agitators and mixers ■ Dusty environments where conventional bearings ■ Printing
Process pumps in refineries ■ Food processing
and lubricants would require protection ■ Spray painting equipment
Cryogenic applications ■ Fuel production
www.helwigcarbon.com
Helwig Carbon Products, Inc. – USA | 8900 West Tower Avenue | Milwaukee, WI 53224-2849
MCB 2012