Professional Documents
Culture Documents
Datasheet of ELG 150 48A Industrial Power Supply Unit
Datasheet of ELG 150 48A Industrial Power Supply Unit
IS 15885(Part 2/Sec13)
M M
SELV IP65 IP67
110
R-41027766
(for DA-Type only} (for 12/12B/12DA/24/24B/24DA Type HL
/36A/42/42A/48A/54 only) (except for BE-Type}
■ Features ■ Applications
· Constant Voltage + Constant Current mode output · LED street lighting
· Metal housing design with functional Ground · LED architectural lighting
· Built-in active PFC function · LED bay lighting
· No load / Standby power consumption <0.5W · LED floodlighting
· IP67 / IP65 rating for indoor or outdoor installations · Type “HL” for use in Class I, Division 2
· Function options: output adjustable via potentiometer; hazardous (Classified} location.
3 in 1 dimming (dim-to-off}; Smart timer dimming; DAL I;
Auxiliary DC output
· Typical lifetime>50000 hours
· 5 years warranty
■ Description
ELG-150-48 is a 150W AC/DC LED driver featuring the dual mode constant voltage
and constant current output. ELG-150 operates from 100~305VAC Thanks to the high efficiency up to 91%,
with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free
air convection. The design of metal housing and IP67/IP65 ingress protection level allows this
series to fit both indoor and outdoor applications. ELG-150 is equipped with various function options, such as
dimming methodologies, so as to provide the optimal design flexibility for LED lighting system
■ Model Encoding
ELG - 150 - 48 A -
Blank:2-wire input for standard model
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to "DRIVING METHODS OF LED MODULE". For DA-Type, Constant Current region is 60%~100% of maximum voltage
under rated power delivery.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTICS” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increaseof the set up time.
7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
8. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC}, is about 80℃ or less.
9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com.
10. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft}.
11. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
File Name:ELG-150-SPEC 2018-09-30
84~150W Constant Voltage + Constant Current LED Driver ELG-150-48
Block Diagram
O.V.P.
※ This series is able to work in either Constant Current mode (a direct drive way) or
Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.
In the constant current region, the highest voltage at the output of the driver
100 depends on the configuration of the end systems.
(B) Should there be any compatibility issues, please contact MEAN WELL.
Vo(%)
(A) Constant
Constant Current area
V oltage area
50
(min.)
(C)
Hiccup
Protection
50 100 Io(%)
100 100
90
80 80
230VAC 230VAC
input only for BE Type input only
60 60
LOAD (%)
LOAD (%)
40 40
20 20
60 0 .9 2 2 3 0 V(1 5 0 W)
LOAD (%)
1 1 5 V(1 0 5 W)
50 0 .9
40 0 .8 8
0 .8 6
100 120 140 160 180 200 240 250 260 270 280 305 50% 60% 70% 80% 90% 100%
22%
20% 94
18%
92
EFFICIENCY(%)
16%
14% 90
277V(150W)
THD
277VAC(150W)
12% 88
10% 230VAC(150W) 230V(150W)
115VAC(105W) 86
8% 115V(105W)
6% 84
4% 82
2%
80
50% 60% 70% 80% 90% 100%
50% 60% 70% 80% 90% 100%
LOAD LOAD
120
100
80
60
LIFETIME(Kh)
40
20
0
20 30 40 50 60 70 80 90
Tcase ( ℃ )
219
208
300±20 195 300±20
45.8
63
AC/N(Blue) Vo-(Black)
AC/L(Brown) 105
Vo+(Red)
SJOW 17AWGx2C tc SJOW 17AWGx2C
&H05RN-F 1.0mm 2 &05RN-F 1.0mm 2
20
tc : Max. Case Temperature
35.5
35
※ A-Type
219
208
300±20 195 300±20
45.8
63
AC/N(Blue) Vo-(Black)
AC/L(Brown) Vo+(Red)
tc 105
SJOW 17AWGx2C SJOW 17AWGx2C
&H05RN-F 1.0mm 2 &05RN-F 1.0mm 2
20
4-ψ4.5
14 36
※ BE-Type
219
208
300±20 195 200±20
DIM+( Gray )
63
AC/N(Blue) DIM-(Black)
AC/L(Brown) Vo-(Black)
tc 105 Vo+(Red)
FG (Green/Yellow) SJOW 17AWGx3C SJOW 17AWGx2C
&H05RN-F 1.0mm 2
20
2
&05RN-F 1.0mm
300±20
4-ψ4.5
35.5
35
※ 3Y Model (3-wire input)
219
208
300±20 195
45.8
63
AC/N(Blue)
AC/L(Brown)
PE (Green/Yellow) tc 105 SJOW 17AWGx2C
SJOW 17AWGx3C 2
&05RN-F 1.0mm
20
&H05RN-F 1.0mm 2
4-ψ4.5
◎ Note1: Please connect the case to PE for the complete EMC deliverance and safety use.
◎ Note2: Please contact MEAN WELL for input wiring option with PE.
INSTALLATION MANUAL