Professional Documents
Culture Documents
Fishing Tools Price Book AOT
Fishing Tools Price Book AOT
Applied Oil Tools reserves the right to change or discontinue designs and/or prices without notice.
All references to Bowen part numbers in this price book are used to identify interchangeable tools and parts. References to such tools
and parts does not imply that Applied Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco.
EXTERNAL CATCH
SPECIAL NOTES:
If top sub, bowl or guide is ordered left hand, undersized or oversized, add 20% for the first 1/4" or portion thereof and an additional 10% for each
additional 1/4" or portion thereof.
SPECIAL NOTES:
If top sub, bowl or guide is ordered left hand, undersized or oversized, add 20% for the first 1/4" or portion thereof and an additional 10% for each
additional 1/4" or portion thereof.
For Basket Grapples with long catch stop, add 10% to Basket Grapple price.
For Basket Grapples with short catch stop, add 25% to Basket Grapple price.
F.S. (Full Strength) Engineered to withstand all pulling, torsional and jarring stain. X.F.S. (Extra Full Strength) Engineered for special hole condition commensurate with maximum
strength.
S.H. (Slim Hole) Engineered to withstand heavy pulling strains. X.S.H. (Extra Slim Hole) Engineered for pick up jobs only.
F.S. (Full Strength) Engineered to withstand all pulling, torsional and jarring stain. X.F.S. (Extra Full Strength) Engineered for special hole condition commensurate with maximum
strength.
S.H. (Slim Hole) Engineered to withstand heavy pulling strains. X.S.H. (Extra Slim Hole) Engineered for pick up jobs only.
F.S. (Full Strength) Engineered to withstand all pulling, torsional and jarring stain. X.F.S. (Extra Full Strength) Engineered for special hole condition commensurate with maximum
strength.
S.H. (Slim Hole) Engineered to withstand heavy pulling strains. X.S.H. (Extra Slim Hole) Engineered for pick up jobs only.
F.S. (Full Strength) Engineered to withstand all pulling, torsional and jarring stain. X.F.S. (Extra Full Strength) Engineered for special hole condition commensurate with maximum
strength.
S.H. (Slim Hole) Engineered to withstand heavy pulling strains. X.S.H. (Extra Slim Hole) Engineered for pick up jobs only.
Extension Sub O.D. 24" Long 30" Long 36" Long 42" Long 48" Long 54" Long 60" LONG
2" TO 2-1/2" O.D. $984 $1,139 $1,284 $1,447 $1,599 $1,710 $1,862
OVER 2-1/2"TO 3" O.D. $1,095 $1,233 $1,396 $1,585 $1,710 $1,862 $2,039
OVER 3" TO 3-1/2" O.D. $1,150 $1,332 $1,497 $1,673 $1,862 $2,039 $2,215
OVER 3-1/2" TO 4" O.D. $1,217 $1,410 $1,599 $1,785 $1,963 $2,152 $2,329
OVER 4" TO 4-1/2" O.D. $1,310 $1,510 $1,686 $1,913 $2,113 $2,304 $2,517
OVER 4-1/2" TO 5" O.D. $1,384 $1,625 $1,811 $2,039 $2,265 $2,491 $2,707
OVER 5" TO 5-1/2" O.D. $1,459 $1,673 $1,888 $2,366 $2,329 $2,555 $2,770
OVER 5-1/2" TO 6" O.D. $1,673 $1,952 $2,215 $2,465 $2,707 $2,982 $3,273
OVER 6" TO 6-1/2" O.D. $1,862 $2,165 $2,465 $2,742 $3,033 $3,335 $3,611
OVER 6-1/2" TO 7" O.D. $2,088 $2,355 $2,707 $3,022 $3,299 $3,599 $3,888
OVER 7" TO 7-1/2" O.D. $2,329 $2,707 $3,033 $3,348 $3,662 $3,965 $4,367
OVER 7-1/2" TO 8" O.D. $2,604 $2,958 $3,284 $3,611 $3,939 $4,354 $4,644
OVER 8" TO 8-1/2" O.D. $2,982 $3,335 $3,750 $4,104 $4,530 $4,782 $5,186
OVER 8-1/2" TO 9" O.D. $3,273 $3,599 $3,965 $4,367 $4,719 $5,047 $5,549
OVER 9" TO 9-1/2" O.D. $3,511 $3,861 $4,266 $4,681 $5,034 $5,450 $5,789
OVER 9-1/2" TO 10" O.D. $3,939 $4,367 $4,808 $5,237 $4,624 $6,066 $6,494
OVER 10" TO 10-1/2" O.D. $5,210 $5,662 $6,166 $6,669 $7,187 $7,614 $8,193
OVER 10-1/2" TO 11" O.D. $5,699 $6,317 $6,809 $7,388 $7,916 $8,458 $8,973
OVER 11" TO 11-1/2" O.D. $6,317 $6,859 $7,450 $8,028 $8,633 $9,199 $9,804
OVER 11-1/2" TO 12" O.D. $6,809 $7,450 $8,040 $8,784 $9,351 $10,117 $10,673
OVER 12" TO 12-1/2" O.D. $7,298 $8,004 $8,720 $9,375 $10,117 $10,797 $11,539
OVER 12-1/2" TO 13" O.D. $8,004 $8,720 $9,501 $10,220 $10,999 $11,768 $12,546
SPECIAL NOTES:
Machine cut, carburized teeth to mill burrs off tool joints and drill collars
Standard Material Price $2,128 $2,600 $3,009 $3,379 $3,781 $4,893 $5,378 $5,672
Nitralloy Material Price * * * * * * * *
O.D. Not Over 9-1/2” 9-3/4”
SPECIAL NOTES:
With end teeth tapered and straight inside teeth to mill over pipe, upset section or tool joint that the overshot catches, priced for use on overshot of
same O.D.
Oversize O.D. extra
SPECIAL NOTES:
When Ordering Please Specify: Bowl or Guide Part Number, Overshot OD and Dressed
ID or size of fish.
GUIDE LENGTH 30" Long 36" Long 42" Long 48" Long
SPECIAL NOTES:
Listed in numerical order of control packer part number
SPECIAL NOTES:
Gotco Adhesive Compound: Resin - $25.00 per can; Catalyst - $25.00 per can
SPECIAL NOTES:
When ordering with Lipped Guide or extra length an extra cost is required. For Extra Long Die Collars, check with Engineering for possible two or
three-piece configuration. Die collars requiring the welding of two pieces together use above prices times 2. Above Die Collars required the welding of
three piece together multiply by 2.5.
Prices for die collars are subject to an extra charge for any changes in I.D., O.D., length or catch range. For left hand die collars, add 20%. Total
length subject to change due to any changes to wicker range.
INTERNAL CATCH
WHEN ORDERING STOP SUB – TYPE F, PLEASE SPECIFY: WHEN ORDERING STOP SUB – TYPE S, PLEASE SPECIFY:
1. O.D. of stop sub body 1. O.D. of ring
2. Length from stop to thread connection 2. O.D. on spear shoulder or stop sub shoulder with which
3. Top & bottom connection desired stop ring is to be used
4. Number of Spear on which stop sub will be used
RECOMMENDED SPARES:
1. One set of segments
2. One set of segment screws
RECOMMENDED SPARES:
1. One set of segments
2. One set of segment screws
JUNK CATCHERS
NOTE:
Type 'A', 'B' or 'C' Shoes; Unless specified, shoes will be furnished with the same OD as minimum hole size shown.
Shoes larger than this will be an additional 10% per 1/4" or portion thereof of standard shoe price.
(6 Req’d) Price * * * * * * * *
Drop Part# JTCB-575-4 JTCB-575-4 JTCB-787-4 JTCB-787-4 JTCB-787-4 JTCB-1012-4 JTCB-1012-4 JTCB-1012-4
Ball Price * * * * * * * *
Filter Part# JTCB-575-5 JTCB-575-5 JTCB-787-5 JTCB-787-5 JTCB-787-5 JTCB-1012-5 JTCB-1012-5 JTCB-1012-5
Nozzle Price * * * * * * * *
Lifting Part# RCB-4-6 RCB-4-6 RCB-6-6 RCB-6-6 RCB-6-6 RCB-9-6 RCB-9-6 RCB-9-6
Sub Price * * * * * * * *
Junk Part# RCB-42-7 RCB-5-7 RCB-6-7 RCB-8-7 RCB-9-7 RCB-9-7 RCB-10-7 RCB-11-7
Catcher Price * * * * * * * *
Mill Shoe Part# RCB-42-8A RCB-5-8A RCB-6-8A RCB-8-8A RCB-9-8A RCB-9-8A RCB-10-8A RCB-11-8A
Type ‘A’ Price * * * * * * * *
Mill Shoe Part# RCB-42-8B RCB-5-8B RCB-6-8B RCB-8-8B RCB-9-8B RCB-9-8B RCB-10-8B RCB-11-8B
Type ‘B’ Price * * * * * * * *
Mill Shoe Part# RCB-42-8C RCB-5-8C RCB-6-8C RCB-8-8C RCB-9-8C RCB-9-8C RCB-10-8C RCB-11-8C
Type ‘C’ Price * * * * * * * *
Mill Shoe Part# RCB-42-8D RCB-5-8D RCB-6-8D RCB-8-8D RCB-9-8D RCB-9-8D RCB-10-8D RCB-11-8D
Type ‘D’ Price * * * * * * * *
Part# JTCB-787-9 JTCB-1012-9
Lower Barrel 7-7/8" 10-1/8"
Price * *
Part# JTCB-575-9A JTCB-575-9A JTCB-787-9A JTCB-787-9A JTCB-1012-9A JTCB-1012-9A
Barrel Adapter 6-1/4" 7" 9-1/8" 10-1/8" 11" 11-7/8"
Price * * * * * *
Seal Kit Part# JTCB-575-10 JTCB-575-10 JTCB-787-10 JTCB-787-10 JTCB-787-10 JTCB-1012-10 JTCB-1012-10 JTCB-1012-10
(O-Rings) Price * * * * * * * *
Part# JTCB-575-18 JTCB-575-18 JTCB-787-18 JTCB-787-18 JTCB-787-18 JTCB-1012-18 JTCB-1012-18 JTCB-1012-18
Gap Spring
Price * * * * * * * *
Ball Seat Part# JTCB-575-20 JTCB-575-20 JTCB-787-20 JTCB-787-20 JTCB-787-20 JTCB-1012-20 JTCB-1012-20 JTCB-1012-20
Removal Tool Price * * * * * * * *
Shear Pins Part# JTCB-575-21 JTCB-575-21 JTCB-787-21 JTCB-787-21 JTCB-787-21 JTCB-1012-21 JTCB-1012-21 JTCB-1012-21
(4 Req’d) Price * * * * * * * *
MILL SHOES
Mill Shoe Part# CB-362-3A CB-387-3A CB-425-3A CB-475-3A CB-512-3A CB-550-3A CB-575-3A CB-650-3A
Type ‘A’ Price * * * * * * * *
Mill Shoe Part# CB-362-3B CB-387-3B CB-425-3B CB-475-3B CB-512-3B CB-550-3B CB-575-3B CB-650-3B
Type ‘B’ Price * * * * * * * *
Mill Shoe Part# CB-362-3C CB-387-3C CB-425-3C CB-475-3C CB-512-3C CB-550-3C CB-575-3C CB-650-3C
Type ‘C’ Price * * * * * * * *
FINGER SHOES
Fits Assembly No. CB-362 CB-387 CB-425 CB-475 CB-512 CB-550 CB-575 CB-650
Max Fish DIA. 2-23/32" 3-9/32" 3-13/32" 4-1/16" 3-3/4" 4" 4-3/8" 5-7/16"
Finger Shoe Part# CB-362-4 CB-387-4 CB-425-4 CB-475-4 CB-512-4 CB-550-4 CB-575-4 CB-650-4
Replacement Price * * * * * * * *
MAGNET INSERTS
Fits Assembly No. CB-362 CB-387 CB-425 CB-475 CB-512 CB-550 CB-575 CB-650
Pull In Lbs. 45 - 55 80 - 100 80 - 100 180 - 205 180 - 205 180 - 205 180 - 205 310 - 360
Complete Part# CB-362-5 CB-387-5 CB-425-5 CB-475-5 CB-512-5 CB-550-5 CB-575-5 CB-650-5
Assembly Price * * * * * * * *
Magnet Part# CB-362-6 CB-387-6 CB-425-6 CB-475-6 CB-512-6 CB-550-6 CB-575-6 CB-650-6
Assembly Price * * * * * * * *
Part# CB-362-7 CB-387-7 CB-425-7 CB-475-7 CB-512-7 CB-550-7 CB-575-7 CB-650-7
Adapter
Price * * * * * * * *
Special Note:
Pulling capacities given, assumes that the magnet is in full contact with a finished flat face, larger than the diameter of the fishing magnet. The magnet
would be fully charged and the applied load would be with a consistent, steady force. The pulling load capacity will be much less, when engaging with
irregular surfaces or smaller surface areas.
ACCESSORIES
Part# FM-2-5F FM-3-5F FM-4-5F FM-5-5F FM-6-5F FM-7-5F FM-8-5F
Flush Guide
Price * * * $157 * * *
Part# FM-2-5L FM-3-5L FM-4-5L FM-5-5L FM-6-5L FM-7-5L FM-8-5L
Lipped Guide
Price * * * $264 $733 $493 *
Part# FM-2-5M FM-3-5M FM-4-5M FM-5-5M FM-6-5M FM-7-5M FM-8-5M
Mill Guide
Price * * * $468 $766 $740 *
ACCESSORIES (continued)
Part# FM-350-5F FM-9-5F FM-10-5F FM-11-5F FM-12-5F FM-13-5F FM-14-5F FM-15-5F
Flush Guide
Price $242 $226 $239 $262 $751 $825 $355 $356
Part# FM-350-5L FM-9-5L FM-10-5L FM-11-5L FM-12-5L FM-13-5L FM-14-5L FM-15-5L
Lipped Guide
Price $300 $320 $321 $364 $429 $453 $1,041 $513
Part# FM-350-5M FM-9-5M FM-10-5M FM-11-5M FM-12-5M FM-13-5M FM-14-5M FM-15-5M
Mill Guide
Price $492 $501 $511 $596 $682 $715 $1,240 $779
WHEN ORDERING, PLEASE SPECIFY: RECOMMENDED SPARES:
Name & Number of Assembly Lipped Guide
Size – OD Mill Guide
Top Connection
ACCESSORIES (continued)
Part# FM-16-5F FM-17-5F FM-18-5F FM-19-5F FM-20-5F FM-21-5F FM-22-5F FM-23-5F
Flush Guide
Price $429 $511 $663 $695 $978 $1,352 $1,608 *
Part# FM-16-5L FM-17-5L FM-18-5L FM-19-5L FM-20-5L FM-21-5L FM-22-5L FM-23-5L
Lipped Guide
Price $663 $860 $1,057 $1,263 $1,438 $2,289 $2,600 *
Part# FM-16-5M FM-17-5M FM-18-5M FM-19-5M FM-20-5M FM-21-5M FM-22-5M FM-23-5M
Mill Guide
Price $999 $1,293 $1,684 $2,029 $2,133 $2,851 $3,408 *
ACCESSORIES (continued)
Part# FM-24-5F
Flush Guide
Price *
Part# FM-24-5L
Lipped Guide
Price *
Part# FM-24-5M
Mill Guide
Price *
Special Note:
Pulling capacities given, assumes that the magnet is in full contact with a finished flat face, larger than the diameter of the fishing magnet. The magnet
would be fully charged and the applied load would be with a consistent, steady force. The pulling load capacity will be much less, when engaging with
irregular surfaces or smaller surface areas.
KEEPERS FOR AIRFREIGHT $22.00 PER INCH O.D. PART NUMBER FM-ASSY #-11
DITCH MAGNETS
Ditch Part# DM-18 DM-24 DM-30 DM-36
Magnet Price $2,542 $2,601 $2,619 $2,708
KANGAROO CATCHER
OD 5-1/2" 7" 9-5/8" 13-3/8"
Jet Tube ID 1" 1" 1-1/4" 1-15/16"
Top Connection 3-1/2" I.F. 4-1/2" I.F. 6-5/8" REG 6-5/8" REG
Part# KC-0550 KC-0700 KC-0962 KC-1337
Price * * * *
WHEN ORDERING, PLEASE SPECIFY:
1. Name & Number of Assembly
2. OD
3. Top Connection
ACCESSORIES
NOTES:
*When ordering oversize, add 5% for each 1/4" of OD or portion thereof to Mandrel, Mandrel Body, Middle Body or Washpipe Body.
Piston Seals are listed with Piston Assemblies and Packing Sets and are included with both, when ordered separately.
(+) Packing Sets include all Seals necessary to dress Jar; Non-Extrusion Rings must be ordered separately.
NOTES:
(+) Packing Sets include all Seals necessary to dress Jar; Non-Extrusion Rings must be ordered separately.
NOTES:
*When ordering oversize, add 5% for each 1/4" of OD or portion thereof to Mandrel, Mandrel Body, Middle Body or Washpipe Body.
Piston Seals are listed with Piston Assemblies and Packing Sets and are included with both, when ordered separately.
(+) Packing Sets include all Seals necessary to dress Jar; Non-Extrusion Rings must be ordered separately.
NOTES:
(+) Packing Sets include all Seals necessary to dress Jar; Non-Extrusion Rings must be ordered separately.
NOTE:
Only one Service Kit required for all sizes of tools. Does not include any Seal Setting Tool, which must be ordered separately and is required for each
Washpipe Part# AMP-31-11-1 AMP-36-11-1 AMP-236-11-1 AMP-136-11-1 AMP-42-11-1 AMP-44-11-1 AMP-146-11-1 AMP-46-11-1
Seal Xref# 568220 568224 568226 568222 568227 568233 568228 568228
Price $4 $4 $4 $4 $4 $5 $4 $4
Mdrl & Washpipe Part# AMP-31-11-2 AMP-36-11-2 AMP-236-11-2 AMP-136-11-2 AMP-42-11-2 AMP-44-11-2 AMP-146-11-2 AMP-46-11-2
Seal Xref# 568329 568333 568333 568332 568337 568339 568337 568338
Price $4 $4 $4 $4 $5 $5 $5 $5
Mdrl & Middle Part# AMP-31-11-3 AMP-36-11-3 AMP-236-11-3 AMP-136-11-3 AMP-42-11-3 AMP-44-11-3 AMP-146-11-3 AMP-46-11-3
Body Seal Xref# 568231 568235 568235 568235 568239 568241 568241 568241
Price $4 $5 $5 $5 $5 $6 $6 $6
Mdrl & Mdl Body Part# AMP-31-11-4 AMP-36-11-4 AMP-236-11-4 AMP-136-11-4 AMP-42-11-4 AMP-44-11-4 AMP-146-11-4 AMP-46-11-4
Seal Sml Xref# 568228 568233 568233 568233 568237 568239 568239 568239
Price $4 $5 $5 $5 $5 $5 $5 $5
Mandrel Body Fill Part# G329-1 G329-1 G329-1 G329-1 G329-1 G329-1 G329-1 G329-1
Plug Seal Xref# 568006 568006 568006 568006 568006 568006 568006 568006
Price $3 $3 $3 $3 $3 $3 $3 $3
Middle Body Fill Part# G617-1 G617-1 G617-1 G617-1 G617-1 G617-1 G617-1 G617-1
Plug Seal Xref# 568005 568005 568005 568005 568005 568005 568005 568005
Price $8 $8 $8 $8 $8 $8 $8 $8
NOTE:
*Packing Sets include all Seals necessary to dress the tool. Non-Extrusion Rings, Seal Protector Rings and Back-up Rings are NOT included,
and must be ordered separately.
NOTE:
*When ordering oversize, add 5% for each 1/4" or portion thereof to OD of Mandrel Body, Mandrel Body insert, Middle Body, Washpipe
Body, and either Mandrel or Top Sub.
NOTE:
Only one Service Kit required for all sizes of tools. Does not include any Seal Setting Tool, which must be ordered separately and is required for each
tool.
SPECIAL NOTE:
Standard Stroke for Bumper Subs is 20": See Long Stroke Bumper Sub section for strokes greater than 20".
Only the Mandrel and Middle Body need be ordered to convert a standard 20" stroke assembly to one of greater stroke.
All other parts interchange for a given size. When a long stroke assembly is ordered by assembly number, the entire tool is ordered.
To convert, order the Mandrel and Middle Body, by number.
* When ordering oversize, add 10% for each 1/4", or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel
and Top Sub.
*When ordering oversize, add 10% for each 1/4", or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel and Top Sub.
SPECIAL NOTE:
Standard Stroke for Bumper Subs is 20": See Long Stroke Bumper Sub section for strokes greater than 20".
Only the Mandrel and Middle Body need be ordered to convert a standard 20" stroke assembly to one of greater stroke.
All other parts interchange for a given size. When a long stroke assembly is ordered by assembly number, the entire tool is ordered.
To convert, order the Mandrel and Middle Body, by number.
* When ordering oversize, add 10% for each 1/4", or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel
and Top Sub.
SPECIAL NOTE:
Only the Mandrel and Middle Body need be ordered to convert a standard 20" stroke assembly to one of greater stroke.
All other parts interchange for a given size. When a long stroke assembly is ordered by assembly number, the entire tool is ordered.
To convert, order the Mandrel and Middle Body, by number.
* When ordering oversize, add 10% for each 1/4", or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel and Top Sub.
*When ordering oversize, add 10% for each 1/4", or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel and Top Sub.
SPECIAL NOTE:
Only the Mandrel and Middle Body need be ordered to convert a standard 20" stroke assembly to one of greater stroke.
All other parts interchange for a given size. When a long stroke assembly is ordered by assembly number, the entire tool is ordered.
To convert, order the Mandrel and Middle Body, by number.
* When ordering oversize, add 10% for each 1/4", or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel and Top Sub.
SPECIAL NOTE:
Only the Mandrel and Middle Body need be ordered to convert a standard 20" stroke assembly to one of greater stroke.
All other parts interchange for a given size. When a long stroke assembly is ordered by assembly number, the entire tool is ordered.
To convert, order the Mandrel and Middle Body, by number.
* When ordering oversize, add 10% for each 1/4", or portion thereof to the price of the Mandrel Body, Middle Body, Mandrel and Top Sub.
NOTE:
Only one service kit required for all sizes of tools - Does not include seal setting tools, which must be
ordered separately as required for each tool.
NOTE:
Additional sizes available upon request.
GOTCOLOY
Part# G145723 G145720 G145721 G145724 G145722 G145728 G145726 G145727
NOM. Size Inches 3/8” 3/16” 1/8” 1/4” 5/16” 10-18” 18-30” 30-45”
10 to 18 18 to 30 30 to 45 SCRN
Graded Particle Size Inches 3/8 to 1/4 3/16 to 1/8 1/8 to 1/16 1/4 to 3/16 5/16 to 1/4
SCRN Mesh SCRN Mesh Mesh
3/8 X 1/4 X 1/4 X 1/4 X 3/16 X 3/16 X
Rod Size Inches 3/8 X 3/16 X 3/16 X 3/16 X 3/16 X 3/16 X
18 18 18 18 18 18
Approx.Weight
Ounces 14-7/8 Oz 10-5/8 Oz 9-1/2 Oz 7-1/4 Oz 5-1/2 Oz 5-1/4 Oz
Per Rod
GOTCO "GOTCOLOY" - QUANTITY PRICES
Less than 10 pounds * per lb.
10 to 49 pounds * per lb.
50 pounds & over * per lb.
Gotco Tinning Rod should be ordered in quantities approximating 20% of the "GOTCOLOY" order.
Gotco Brazing Flux should be ordered in quantities approximating 2% of the "GOTCOLOY" order.
STANDARD TYPE
Length of Cup 10 10 10 10 10 10 10 10
Total Length 29” 29-1/2” 30-1/2” 30-1/2” 30-1/2” 31-1/2” 31-1/2” 33”
Part# BB-1 BB-2 BB-3 BB-4 BB-5 BB-6 BB-7 BB-8
Complete Assembly
Price $3,213 $3,642 $3,689 $3,709 $4,023 $4,408 $4,807 $6,223
LONG TYPE
Length of Cup 20 20 20 20 20 20 20 20
Total Length 43-1/2” 44” 45” 45” 45” 46 46 48
Part# BBL-1 BBL-2 BBL-3 BBL-4 BBL-5 BBL-6 BBL-7 BBL-8
Complete Assembly
Price $3,535 $3,964 $4,220 $4,179 $4,559 $5,318 $5,493 $7,284
STANDARD TYPE
Length of Cup 10" 10" 10" 10" 10" 10" 10" 10"
Total Length 29” 29-1/2” 30-1/2” 30-1/2” 30-1/2” 31-1/2” 31-1/2” 33”
Part# BB-1-T BB-2-T BB-3-T BB-4-T BB-5-T BB-6-T BB-7-T BB-8-T
Complete Assembly
Price * * * * * * * *
Part# BB-1-1-T BB-2-1-T BB-3-1-T BB-4-1-T BB-5-1-T BB-6-1-T BB-7-1-T BB-8-1-T
Mandrel w/ Integral Gusset
Price * $2,177 $1,806 $2,712 $3,079 $2,772 $5,017 $5,041
Part# BB-1-2-T BB-2-2-T BB-3-2-T BB-4-2-T BB-5-2-T BB-6-2-T BB-7-2-T BB-8-2-T
Threaded Cup
Price * $959 $937 $1,172 $1,214 $1,199 $1,373 $2,155
LONG TYPE
Length of Cup 20" 20" 20" 20" 20" 20" 20" 20"
Total Length 43-1/2” 44” 45” 45” 45” 46" 46" 48"
Part# BBL-1-T BBL-2-T BBL-3-T BBL-4-T BBL-5-T BBL-6-T BBL-7-T BBL-8-T
Complete Assembly
Price * * * * * * * *
Part# BBL-1-1-T BBL-2-1-T BBL-3-1-T BBL-4-1-T BBL-5-1-T BBL-6-1-T BBL-7-1-T BBL-8-1-T
Mandrel w/ Integral Gusset
Price * $2,661 $2,581 $3,125 $3,477 $3,673 $5,074 $6,668
Part# BBL-1-2-T BBL-2-2-T BBL-3-2-T BBL-4-2-T BBL-5-2-T BBL-6-2-T BBL-7-2-T BBL-8-2-T
Threaded Cup
Price * $1,151 $1,187 $1,342 $1,495 $1,578 $1,786 $2,858
SPECIAL NOTES:
1. Unless otherwise specified, shoes will be furnished with same ID as Washover String.
2. Any specified ID larger than standard can be furnished with no additional charge.
3. For hard-faced teeth only (no side ribs) use plain teeth price as base, plus $28.00 per diameter inch of teeth OD.
4. For hard-faced outside ribs use hard-faced teeth price as base, plus $12.00 per diameter inch of Rib OD.
5. For bodies longer than 16 inches, add per inch charge for each additional inch of length ordered.
6. All rotary shoes listed above are available also dressed with crushed sintered tungsten carbide hard facing.
7. For oversized shoes, add 10% per 1/4 inch or portion thereof left oversize on OD or undersize ID.
OP Pin Conn. 4-1/2" REG 6-5/8" REG 6-5/8" REG 6-5/8" REG 6-5/8" REG 6-5/8" REG 6-5/8" REG 6-5/8" REG
OD 7-7/8 O.D. 7-7/8 O.D. 7-7/8 O.D. 7-7/8 O.D. 7-7/8 O.D. 7-7/8 O.D. 7-7/8 O.D. 9-1/2 O.D.