Professional Documents
Culture Documents
HGHT0789883201
HGHT0789883201
Test Report
Applicant : NANTONG LIANFA PRINTING&DYEING FACTORY Issue Date : Feb 27, 2024
NO.88 HENGLIAN RD, CHENGDONG TOWN, HANAN
COUNTY, NANTONG CITY, JIANGSU, CHINA
Attn : CHERRY
Conclusions
Test Item
Fiber Analysis *1
pH Value F
Dimensional Stability To Washing P
Appearance After Wash P
Spirality After Wash P
Color Fastness To Washing P
Color Fastness To Crocking F
Color Fastness To Light P
Color Fastness To Non-Chlorine Bleach P
Color Fastness To Perspiration P
Color Fastness To Water P
Pilling Resistance As Received P
Tensile Strength As Received P
Tearing Strength As Received P
Seam Slippage As Received P
Abrasion Resistance P
Counts Of Yarn #
Threads Per Unit Length P
Weight Per Unit Area P
Wearing Apparel Flammability P2
Note:
Tests presented in this report are conducted as requested by Applicant.
P = Pass F = Fail # = No Comment C = Conform Label
N/A = Not Applicable - = Did Not Perform * = See Remark
Approved By:
Intertek Testing Services Ltd.,
Shanghai,Hangzhou Branch
Vivian Zhao
Manager
Reviewer: Bob Wang
Intertek Testing Services Ltd., Shanghai,Hangzhou Branch Page 4/12
2F, 3F, 4F, 6F's Room 601-618, Building 6, No. 1180, Bin'an Road,
Changhe Street, Binjiang District, Hangzhou, Zhejiang, China
上海天祥质量技术服务有限公司杭州分公司
中国浙江省杭州市滨江区长河街道
Tel: +86 571 8768 8218 Fax: +86 571 8679 0296
E-mail: hztmr@intertek.com
Attention is drawn to the terms and conditions on Website: www.intertek.com.cn/responsibility
Report Number : HGHT07898832
*1 = Conform To The Declared Fiber Content
P2 = Based upon the results of the flammability test reported, the sample submitted for testing is rated as a Class 1 Material (Normal
Flammability) when tested and classified in accordance with the procedures and requirements of the Flammability regulation 16 CFR
Part 1610 originally effective from January 1953 and amended in 2023.
Approved By:
Intertek Testing Services Ltd.,
Shanghai,Hangzhou Branch
Vivian Zhao
Manager
Reviewer: Bob Wang
Intertek Testing Services Ltd., Shanghai,Hangzhou Branch Page 5/12
2F, 3F, 4F, 6F's Room 601-618, Building 6, No. 1180, Bin'an Road,
Changhe Street, Binjiang District, Hangzhou, Zhejiang, China
上海天祥质量技术服务有限公司杭州分公司
中国浙江省杭州市滨江区长河街道
Tel: +86 571 8768 8218 Fax: +86 571 8679 0296
E-mail: hztmr@intertek.com
Attention is drawn to the terms and conditions on Website: www.intertek.com.cn/responsibility
Report Number : HGHT07898832
1 Fiber Analysis
Test Condition
AATCC TM20-2021/AATCC TM20A-2021 53.7% Cotton 46.3% Polyester 55% Cotton 45% Polyester
Remarks:
Based On Moisture Regain Weight
Moisture Regain Of Cotton 8.0% & Polyester 0.4%
(Based On ASTM D1909-2013)
2 pH Value
AATCC TM81-2022
REQ
pH Value 8.5 6.0-8.0
Remarks:
(+) Means Extension And (-) Means Shrinkage
Color Change
Result REQ
Part Grade Grade
Remarks:
FTS = Fabric Torn At Seam
STB = Sewing Thread Broken
# = The Seam Opening Was Less Than ¼ Inch Though The Ultimate Seam Strength
Was Found As Stated.
16 Abrasion Resistance
ASTM D4966-22, Option 1, Martindale Abrasion And Pilling Tester
Test Condition
Abrasion Resistance: After 9000 rubs , Total Pressure: 9 Kpa
Result REQ
Resistance Face Side Over 9,000 rubs 9,000 rubs
17 Abrasion Resistance
ASTM D4966-22, Option 2, Martindale Abrasion And Pilling Tester
Conditions
Total Pressure: 9 Kpa , Shade Change: After 5000 rubs
REQ
Shade Change Grade 4.0 3.5 min
18 Counts Of Yarn
ASTM D1059-17(R2022)
Remarks:
Tex = Tex Count
’S = English Cotton Count
1 SF poi SF poi
2 SF poi SF poi
3 SF poi SF poi
4 SF poi SF poi
5 SF poi SF poi
Remarks:
Cleansing Condition: The sample was first undergone drycleaning in perchloroethylene with cationic detergent and then washed
accordance with AATCC LP1-2021, Test No. (1)(IV)(Aiii), 16 Minutes Machine Wash At 120°F, Normal Cycle, Followed By Tumble Dry
Permanent Press.
End of Report
This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any particular course of action. Intertek does not accept a duty of
care or any other responsibility to any person other than the Client in respect of this report and only accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek's provision
of services to you. Intertek makes no warranties or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a diligent
and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise, except in the event of our gross negligence or wilful
misconduct.
This report shall not be reproduced except in full, without written approval of the laboratory.