Professional Documents
Culture Documents
984-480 Systemspecs
984-480 Systemspecs
INDICATORS PHYSICAL CHARACTERISTICS Dimensions Weight ELECTRICAL CHARACTERISTICS Static Discharge Time-of-Day Clock Magnetic Agency Approval CIRCUIT CHARACTERISTICS Scan Rate Throughput Local I/O Remote I/O Total I/O Cap Memory Holdup Power Consumption Surge Withstand (continued)
SPECIFICATIONS
A-l
ENVIRONMENTAL CHARACTERISTICS Temperature Humidity Altitude Shock Vibration BUILT-IN POWER SUPPLY Input Power Fusing Holdup Indicators Output to I/O Service EXTERNAL POWER ISSUES AC Isolation Transformer External 24Vdc Power Supply 800 Series I/O Module Loading RI/O CABLES AND RELATED HARDWARE CATV Cable RG-6/U Coaxial Cable RG-1 1 /U Coaxial Cable Line Tap Line Splitter Cable Terminators F & BNC Connectors with Crimp Tools
Mainframe
Specifications
POWER OK
Green LED: When ON, indicates input power OK and voltage outputs OK. (Your I/O power OK is indicated by READY LED.) Amber LED: When ON, indicates Controller passed power-up diagnostics. Remains ON in Stopped and Run modes as long as health status is OK. Indicator is OFF when an error condition is detected by diagnostics. (continued)
READY
A-2
SPECIFICATIONS
Mainframe
L
Specifications
(continued)
indicators . RUN
(continued)
Green LED: When ON, indicates Controller is in Run mode and solving logic. LOW Red LED: When ON, indicates battery needs to be replaced (14 day holdup from initial indication). Green LED: When ON, indicates communication processor has unit address and communications are in progress. Green LED: When ON, indicates communication processor has unit address and communications are in progress. Green LED: When ON, indicates communication on the high speed RIO is in progress. Red LED: When ON, indicates a communications error has been detected on the RIO (ex: CRC framing).
BATTERY
COMM 1
COMM 2
RIO ACT
RIO ERR
Physical Characteristics
Dimensions WxHxD WxHxD Weight 2.54 x 10.5 x 8 (39.4 x 266 x 203) 5 Ibs, 6 oz
inch (mm)
Electrical
Characteristics
15kV to all surfaces f 1 set/day + 3 set/day + 8 set/day @ 25OC 0-40C 0-60C
Magnetic
Mainframe
Specifications
(continued)
Electrical Characteristics
Agency Approval
(continued)
Designed to meet applicable agency safety requirements
Circuit Characteristics
Scan Rate Throughput Local I/O
5 ms/K words of user logic < 15ms for 64 I/O points 512 bits in/ 512 bits out 1 Discrete point = 1 bit 1 Analog point = 16 bits with Max I/O Mods in local drop = 21 Up to 6 drops, each drop 512 bits in/ 512 bits out; up to 32 modules ea drop 6 Remote Drops plus 1 Local
l
Remote I/O
3584 bits in/ 3584 bits out max Discrete I/O = 1024 max Analog I/O = 448
Memory
User Logic: 4/8 K Words Registers: 1920 64ms for CPU from POWER OK going inactive 5w Per IEEE 472-1974, ANSI C37.90a
Holdup
A-4
SPECIFICATIONS
Mainframe
hd
Specifications
Characteristics
(continued)
Environmental
Temperature
60C + 80C
O-95% Non-condensing Non-operating: Non-condensing Operating: 85O F 10,000 feet max + 1Og , 11 ms, 3 pulses per axis s (Operating) 5Hz to 50Hz @ .005 in D.A., 30 min/axis 50Hz to 500Hz @ 0.625 g , 30 min/axis s IOHz to 50Hz @ .029 g /Hz s 50Hz to 300Hz @ .029 g /Hz, s - 8d B/octave
Vibration
(Passive)
cd
Built-in
Power
Supply Specifications
115 Vat f 15% 230 Vat f 15 % 24 Vdc _+ 15% under External Power Issue
Input Power*
0.750A and 3A SB Buss (Not customer replaceable) 64ms for CPU from POWER OK going inactive Green LED: POWER OK
Holdup
Indicators
SPECIFICATIONS
A-5
Mainframe
Specifications
(continued)
Output to I/O Service Power Current * Vl 5Vdc I/O v2 4.3Vdc I/O V3-5Vdc I/O
16.25 Watts
*When added, any combination of Vl and V2 must not exceed 3.0Adc continuous operation.
2.
A-6
SPECIFICATIONS
Manufacturer:
Times Company.
Description Plain Jacketed Jacketed Messengered Jacketed for Burial Jacketed for Burial & Armored
(15.24 cm)
6.96 (17.68 cm) 6.96 (17.68 cm) 7.2 8.4 (18.29 cm) (21.33 cm)
NOTE Above cables have a capacitance of 15 pfd per foot and a signal loss of 0.8 dB per 1000 feet (304.8 meters) at 1.544 MHz.
Manufacturer:
Type
Comm Scope Co. (617) 756-2333 Description Bare Cable, Alum. Sheath Polyethylene Jacket Underground/Waterproof Waterproof with Armor
NOTE Above cables have a minimum bend radius of 8 in. (20.32 cm) and a capacitance of 15.3 (+ or -) 1 .O pfd per foot. Losses are 0.8 dB per 1000 feet (304.8 meters) at 1.544 MHz.
Manufacturer:
Type
Belden Corp (317) 983-5200 Description Solid Conductor Solid Conductor Flooded Burial Cable
9114 9587
Minimum bend radius for each cable is 3.3 in. (8.25 cm). The capacitance 17.3 pfd. per foot (nominal). The losses are 7.0 dB per 1000 feet (304.8 meters) at 1.544 MHz.
SPECIFICATIONS
A-7
Manufacturer:
Type
20107
DBB-12M-A
w NOTE
Above cables have capacitance of 17.3 pfd per foot (nominal). Losses are 2.0 dB per 1000 feet (304.8 meters) at 1.544 MHz.
Manufacturer:
Type
Type RSS-6-208E
Above cable has a capacitance of 17 pfd. per foot (nominal) and losses of 2.0 dB per 1000 feet (304.8 meters) at 1.544 MHz.
Line Taps
The following tap is manufactured by MODICON IAS. Call l-(508)-794-0800 (from MA); l-(800)-468-5342 (from outside MA). This MODICON tap is supplied with a 75 ohm termination and Type F-56 male connector.
Type/Description
75 Ohms
A-8
SPECIFICATIONS
Line Splitter
The following splitter is manufactured by MODICON IAS. Call l-(508)-794-0800 (from MA); l-(800)-468-5342 (from outside MA). This MODICON splitter is supplied with a 75 ohm termination and Type F-56 male connector.
- 6.0 dB Max.
-18 dB Min.
75 Ohms
NOTE Line splitters are not recommended due to the need for balancing dB losses on each side. Unbalanced loss can lead to VSWR problems.
- 75 Ohms
and
The following cable terminator is recommended by MODICON manufactured by JerroldlRF Systems; Call (800) 847-0721 Type: TR-75F (or any other i/4 watt brand).
- 75 Ohms
The following cable terminator is manufactured by MODICON IAS. Call l-(508)-794-0800 (from MA); l-(800)-468-5342 (from outside MA). Type: 75 Ohm in-line (l/4 watt). MODICON P/N 60-0513-000
SPECIFICATIONS
A-9
Gilbert GF-6-AHS/312: Call (800) 528-8567 LRC F-56CH: Call (603) 739-3844 MODICON P/N 52-0331-000: Call l-(508)-794-0800 (from MA); l-(800)-468-5342 (from outside MA).
GA-BNC-6-AHS312L, with crimp tool from the recommended list below G-BNC-6-AHS-312L (two-piece corm) with special Crimp tool, G-CRT-775
3. MODICON IAS: Call MODICON at l-(508)-794-0800 (from MA); l-(800)-468-5342 (from outside MA).
l
A-l 0
SPECIFICATIONS
Recommended
l
l_RC CT-596 Gilbert G-CRT-659 Cablematic CR-5966 Cable Prep HCT-659 Gilbert G-CRT-775 Cable Prep HCT-775
Table 800
Summary
Specifications
1
25 1 1 25 1 2 2 1 1 1
1
1 1 600
DISCRETE OUTPUTMODULES
VOLTAGE MODEL 8804-016 BElO-008 8802-008 8808-016 8838-032 B826-032 8824-016 8832-016 BBZO-008 8836-016 8814.108 8840-108 8828-016 8864-001 RANGE 115 VAC 115 VAC 115 VAC 230 VAC 24 VDC (TH) 24 VDC (TH) 24 VDC ITH) 24 VDC (it) 1O.Z VDC iTH) 12-250 VDC RELAY (NO/NC) REED RELAY (NO/NC) 5VTTL TTL REGISTER NUMBER OF OUTPUTS 16 a 8 16 32 32 16 16 8 16 8 8 16 8 CH NUMBER PER COMMON a 1 2 8 8 32 8 8 2 1 110 POWER REOUIREO ImA) +5ov 76 50 76 76 160 90 32 32 90 50 107 67 32 220 +4.3v 480 240 240 480 I 1 260 235 80 603 BOO 400 220 180 -5.ov 0 0 0 0 0 0 0 0 0 0 0 0 0 0 REOUIREO ADDRESSING DISC. 110 0 I 16 01 01 0 I16 0 / 32 0 I32 01 0 16 16 0 8 8 REG I/O o/o O/O o/o 010 o/o 010 o/o 010 010 o/o o/o 010 o/o O/8 REGUIREO CONNECTOR AS-8534-000 AS8534-000 AS-8534-000 AS-8534-000 AS-8535-000 AS-8535-000 AS-8534-000 AS-8534-000 AS-8534-000 AS-8535-000 AS-8534-000 AS+I534-000 AS-8534-000 AS-6535-000
01
0 I 16 01 01 8 8
1 1
16 a
0 I 16 o/ 0
REOIJIRED ADDRESSING DISC I/O o/o o/o 010 o/o o/o 010 o/o o/o 010 REG I/O 8/O 810 410
REOUIREO CONNECTOR INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED AS-8535-000 AS-8535-000
-50v 0 0 0 0 0 0 0 0 0
a/o
4/o 313 313 O/l 011
RTO AMERICAN OR EUROPEAN lOOOHM PLATINUM ANALOG MULTIPLEXER 16 VOLTAGE INPUTS. 1 OUTPUT ANALOG MULTIPLEXER 16 CURRENT INPUTS. 1 OUTPUT
SPECIFICATIONS
A-l 1
I/O Module
Summaries
ANALOG OUTPUTMODULES
DESCRIPTION AND MODEL
887.2~002 8872.011
APPLICATION RANGE
O/A: 4-20mA. 1-SV O/A: ilOV, i5V. O-1OV. O-5V
NUMBER CHANNELS
4 4
REG.110
014 o/4
INTELLIGENT MODULES
MODEL
8882-239 8883.001 6883-101 8883-111 8884-002 8885-001
DESCRIPTION
HIGH SPEED COUNTER, ZUP-COUNTERS. O-JOkHz HIGH SPEED COUNTER, 2 UP/DOWN, O-50kHz, INTERNAL CLOCK CAM EMULATOR, ABSOLUTE ENCODER INPUT.8 DISCRETEOUT
l/O PDWER IEPUIRED(mA) REPUIRED MORESSlNG +5.OV +4.3V -K.DV DISC. l/O nE6. I/O
188 680 1000 1000 50 500 0 0 0 0 0 1760 0 0 0 0 0 0 o/o o/o o/o o/o O/O o/o 2/z 3/3 3/3 3/3 414 6/6
REQUIRE0
CONNECTOR INCLUOEO INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED
CAM EMULATOR WITH VELOCITY COMPENSATION PIO, 2 LOOPS, CASCADABLE.STANDALONE. 11 TOTAL l/O ASCII/BASIC, MK RAM, 2 RS232/422 PORTS
(2) MAXIMUM
13500 mA
(3)TOTAL
MAXMUM
8000 mA
= 3OOOmA
ANDI/O
PRIMARY FOR REMOTE RECEIVER. POWER SUPPLVANUI/~ SECONDARY RACK.POWER SUPPLY AND110OYLY SECONDARY RACK, POWER SUPPLY
ANDl/O DNLY
l/o POWER EXTENOER CABLE TO ADDITIONAL RACK WITHOUT POWER SUPPLY l/o WWER EXTENDER CABLE TO ADDITIONAL RACK WITHOUT POWER SUPPLY l/O POWER EXTENDER CABLE TO AOOITIONAL RACK WITH POWER SUPPLY LOCAL l/O CABLE FOR THE 984X
A-l 2
SPECIFICATIONS