Professional Documents
Culture Documents
Boq - Quarter Master Office
Boq - Quarter Master Office
Boq - Quarter Master Office
KUKREJA ARCHITECTS
#REF!
SUMMARY SHEET
COST OF CIVIL INTERIOR WORK - TOWNSHIP OFFICE
INTERIOR WORK
Sr Amount Total
No. Descriptions Amount
DSR NSI
#REF!
Analysis of Rates
NSI-1 Providing and fixing in position white sand stone door frame of single paitam (rebated ) of size 100x60 mm joined with adhesive as approved
including making hole for providing and fixing hinges and all hardware such as tower bolts / sliding door bolts etc. by suitable means and dash
fastener of size 10x160 mm, minimum 600mm spacing for fixing of frames , all complete as directed by Engineer- in-charge . Note : All exposed
surface will be machine cut .
Materials
Stone door frame 100x60mm 5.28 metre 114.80 Rs 606.14
2506 Dash Fastener (10*160 mm ) 6.00 no 26.00 Rs 156.00
9999 Adhesive for fixing of joints 10.00 L.S. 2.00 Rs 20.00
Labour
0123 Mason (brick layer) 1st Class 0.20 Day 738.00 Rs 147.60
0114 Beldar 0.20 Day 558.00 Rs 111.60
9999 Sundries (Making Holes for hinges and fittings as suitable means) 30.00 L.S. 2.00 Rs 60.00
TOTAL (A) 1101.34
Add 1% W.C. 11.01
Total (X) 1112.36
Contractor's overhead and profit @ 15% on (Y) 15% 166.85
TOTAL (Z) 1279.21
Add Cess @1% on (Z) 1% 12.79
1292.00
cost for 5.28 metre Rs. 1292.00
cost for 1 metre Rs. 244.70
NSI-2 Providing, supplying and installing at site Glass Reinforced Concrete (GRC) decorative CORBEL / BRACKET , made up of mainly White Cement
(conforming to ASTM C 150), High Silica sand (conforming to ASTM c144), AR Glassfibre, Admixtuers (conforming to ASTM c260,ASTM c618), by
using Spray Process and as recommended by PCI (Precast Institute) USA, Manual 128 (edn4) or as per GRCA International specifications with
design as per details provided in drawings and site requirements/ measurements and as per approved finish and color shade, with sealers and
hardwares required, all in accordance with the manufacturer's specifications and conforming to Indian/ ASTM standards, along with submission
of shop drawings for approval, complete in all respects.
NSI-3 Providing and fixing vision glass panels single glazing of 8 mm thickness toughened solar E plus blue green high performance with VLT39 ,
SHGC 0.35 & U value 2.8 wm2k US summer , internal reflection 9 and external reflection 6 in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of Engineer-in-charge .
(Cost of aluminium snap beading shall be paid in basic item):
Providing and fixing of Granite stone 18mm thick in dado / riser / skirting laid on 12mm ( average ) thick cement mortar 1:3 ( 1 cement: 3 coarse
NSI-4 sand ) and jointed with white cement slurry mixed with pigment to match the shade of the slabs,including rubbing mirror polishing complete.
NSI-5 Providing and applying 6 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight
aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare
brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete
Rate Amount
Sr
Description of Item IMAGES FOR REFERENCE Unit TOWN DSR (without DSR (with
No. TOTAL QTY NSI DSR (without GST ) NSI
OFFICE GST ) GST )
Supply of Vista Roller Blinds with head rail aluminum strip powder coated of Vista Screen fabric of 22% - 25%,
Polyester,75% - 78% PVC Openness Factor: 3%; to 5% Thickness: Min 0.65mm,-0.69mm(+5%)Weight (g/m2): Min 465gsm
- 470gsm fire classification: (NFPA 701)
Hardware : ROLLER TUBE with headrail of High Strength extruded Aluminium alloy anodized 38mm OD of tube with a
#REF! minimum wall thickness of 1.0mm . sqm #REF! #REF! 2,540.00 #REF! #REF!
IDLER shall be of high strength fiberglass reinforced polyster, consisting of an outside sleeve and centre shaft. Sleeve shall
provide bearing surface of roller tube and ratate freely on centre shaft, providing smooth quiet and long wearing operation.
PLANTERS - Supply of textured stone or solid finished, light weight (shape: round/ oval/ rectangular/ conical/ elliptical)
(color: beige/ white/ grey/ black) full bodied, exterior grade, joint/ layer free, homogeneous planters made with premium
quality LLDPE polymer manufactured with precision rotational moulding process. The planters shall be made of 100%
recyclable content, industrial grade quality polymer, non- metallic, shock proof, asbestos and glass fiber free compounds.
#REF! Planters shall be rust proof, UV-resistant, anti-frost, no peeling and easy to clean. OEM / authorized supplier to provide 1 NOS. 3.00 3.00 15,200.00 0 45600
year warranty against fading & any manufacturing defect. Design, color and size as per selection.
1 PERSON SINGLE CORNER WORKSTATION 1500 X 1500 (WITH PEDESTAL, CPU TROLLY & KEYBOARD TREY.)
Table Top:- Tabletop made up of 25mm thick Pre laminated particleboard placed on the cross member to give the floating
look.
Under-Structure:- Under-structure Made up of MS Pipe of 50X50X1.6MM Thick for Vertcle Member & 40X40X1.6MM Thick
for Horizontal support member. Vertical & Horizontal members are connected with specially designed Mazak connectors.
Metal Cable tray provided below tabletop for data and power cable management with Molded Vertibra (Snake) to carry the
wire from Floor. All Metal parts are Epoxy Powder coated in Matt white color. Special Molded Leveler and Leveler foot for
better alignment. Molded Leg cap to cover Top Edge of Pipe Leg.
#REF! NOS. 4.00 4.00 73903.00 295612
Privacy Panel:- Privacy panel screen in 21mm thick sleeker construction of Aluminum section and Die-Casted caps and
bracket. Screen available with Fabric pasted Pin-up & Marker combination for above table use. Screen available in 300mm
width for above table Configuration & 600mm width for Linear & T type configuration. Privacy panel supporting frame with
Epoxy powder coating.
PEDESTAL WT 3 DRAWERS 404(W) X 450(D) X 675(H)
Below table drawer unit with three drawer.
CARCASS:- Top, side panel, bottom panel and skirting are made up of 18mm thick pre-laminated particle board are fixed
with the back panel by proper grooving done on the back panel which is made up of 9mm thick pre-laminated particle board.
The side panel, bottom and top panel are to be assembled with the help of wooden dowel, knock down fittings Drum with
screw and corner fittings to ensure the stability of box structure formed.
DRAWER:- Provision of two books drawer of size 314(W) X 400(D) X 80(H) and one file drawer of size 314(W) X 400(D) X
225(H) made up of 12mm thick pre-laminated particle board with the bottom panel of 9mm thickness. The small drawers are
mounted on a telescopic slide with 3/4 extension whereas the big drawer mounted on a telescopic slide with a full extension
allowing storage of files with the help of file manager. Drawer fascia made up of 18mm thick pre-laminated particle board.
Provision of centralizing locking for all three
drawers and D type slim handle for drawer.
KEY BOARD TRAY (SIZE: 510X240 MM)
This efficient keyboard tray and mouse platform are made from MDF and covered with black textured PVC material with long
drawer slides. The drawer slides lock in fully extended position and prevents keyboard moving during use.
CPU TROLLEY UNIT
The base is made of 1.6 mm thick CRCA and the sides are made of 1.2mm thick. The width of the trolley can be varied to
accompany various width CPU. The CPU is mounted on lockable castors.
4 PERSON PLUS CORNER WORKSTATION 1500 X 1500 (WITH PEDESTAL, CPU TROLLY & KEYBOARD TREY.)
Table Top:- Tabletop made up of 25mm thick Pre laminated particleboard placed on the cross member to give the floating
look.
Under-Structure:- Under-structure Made up of MS Pipe of 50X50X1.6MM Thick for Vertcle Member & 40X40X1.6MM Thick
for Horizontal support member. Vertical & Horizontal members are connected with specially designed Mazak connectors.
Metal Cable tray provided below tabletop for data and power cable management with Molded Vertibra (Snake) to carry the
wire from Floor. All Metal parts are Epoxy Powder coated in Matt white color. Special Molded Leveler and Leveler foot for
better alignment. Molded Leg cap to cover Top Edge of Pipe Leg.
Privacy Panel:- Privacy panel screen in 21mm thick sleeker construction of Aluminum section and Die-Casted caps and
bracket. Screen available with Fabric pasted Pin-up & Marker combination for above table use. Screen available in 300mm
#REF! width for above table Configuration & 600mm width for Linear & T type configuration. Privacy panel supporting frame with
Epoxy powder coating.
PEDESTAL WT 3 DRAWERS 404(W) X 450(D) X 675(H)
Below table drawer unit with three drawer.
CARCASS:- Top, side panel, bottom panel and skirting are made up of 18mm thick pre-laminated particle board are fixed
with the back panel by proper grooving done on the back panel which is made up of 9mm thick pre-laminated particle board.
The side panel, bottom and top panel are to be assembled with the help of wooden dowel, knock down fittings Drum with
screw and corner fittings to ensure the stability of box structure formed.
DRAWER:- Provision of two books drawer of size 314(W) X 400(D) X 80(H) and one file drawer of size 314(W) X 400(D) X
225(H) made up of 12mm thick pre-laminated particle board with the bottom panel of 9mm thickness. The small drawers are
mounted on a telescopic slide with 3/4 extension whereas the big drawer mounted on a telescopic slide with a full extension NOS. 1.00 1.00 200005.00 200005
allowing storage of files with the help of file manager. Drawer fascia made up of 18mm thick pre-laminated particle board.
Provision of centralizing locking for all three
drawers and D type slim handle for drawer.
KEY BOARD TRAY (SIZE: 510X240 MM)
A-HRRL-CIVIL-SUMMARYThis
SHEET_(F)
efficient keyboard tray and mouse platform are made from MDF and covered with black textured PVC material with long PAGE NO-7
drawer slides. The drawer slides lock in fully extended position and prevents keyboard moving during use.
CPU TROLLEY UNIT
The base is made of 1.6 mm thick CRCA and the sides are made of 1.2mm thick. The width of the trolley can be varied to
PEDESTAL WT 3 DRAWERS 404(W) X 450(D) X 675(H)
Below table drawer unit with three drawer.
CARCASS:- Top, side panel, bottom panel and skirting are made up of 18mm thick pre-laminated particle board are fixed
with the back panel by proper grooving done on the back panel which is made up of 9mm thick pre-laminated particle board. C.P. KUKREJA ARCHITECTS
The side panel, bottom and top panel are to be assembled with the help of wooden dowel, knock down fittings Drum with
screw and corner fittings to ensure the stability of box structure formed. Rate Amount
Sr DRAWER:- Provision of two books drawer of size 314(W) X 400(D)
Description of X 80(H) and one file drawer of size 314(W) X 400(D) X
Item IMAGES FOR REFERENCE Unit TOWN DSR (without DSR (with
No. 225(H) made up of 12mm thick pre-laminated particle board with the bottom panel of 9mm thickness. The small drawers are TOTAL QTY NSI DSR (without GST ) NSI
OFFICE GST ) GST )
mounted on a telescopic slide with 3/4 extension whereas the big drawer mounted on a telescopic slide with a full extension NOS. 1.00 1.00 200005.00 200005
allowing storage of files with the help of file manager. Drawer fascia made up of 18mm thick pre-laminated particle board.
Provision of centralizing locking for all three
drawers and D type slim handle for drawer.
KEY BOARD TRAY (SIZE: 510X240 MM)
This efficient keyboard tray and mouse platform are made from MDF and covered with black textured PVC material with long
drawer slides. The drawer slides lock in fully extended position and prevents keyboard moving during use.
CPU TROLLEY UNIT
The base is made of 1.6 mm thick CRCA and the sides are made of 1.2mm thick. The width of the trolley can be varied to
accompany various width CPU. The CPU is mounted on lockable castors.
#REF!
MB CHAIR
MEDIUM BACK chair is ergonomic solution for seating work. The revolving office chair having push back mechanism for
backrest made in molded PP upholstered with mesh fabric for better ventilation.seating position height adustable up to 90mm
with armrest adjustable in vertical and horizontal direction. Chair having single tilt lock and externaly mounted adjustable
lumbersupport.
#REF! NOS. 10.00 10.00 12,945.00 129450
Rate Amount
Sr
Description of Item IMAGES FOR REFERENCE Unit TOWN DSR (without DSR (with
No. TOTAL QTY NSI DSR (without GST ) NSI
OFFICE GST ) GST )
LOW HEIGHT STORAGE 900(W) X 450(D) X 900(H)
Storage with height of 4feet with three shutters and two adjustable shelf within usable as back unit.
CARCASS:- Top, side panel, bottom panel and skirting are made up of 18mm thick pre-laminated particle board are fixed
with the back panel by proper grooving done on the back panel which is made up of 9mm thick pre-laminated particle board.
The side panel, bottom and top panel are to be assembled with the help of wooden dowel, knock down fittings Drum with
screw and corner fittings to ensure the stability of box structure formed.
#REF! SHELF AND SHUTTER:- Two adjustable shelf with three-point adjustment of 64mm from the lower position reference point, NOS. 3.00 3.00 12,000.00 36000
supported on shelf support lug & three shutters of lighter shade made up of 18mm thick pre-laminated particle board
mounted on 0 crank hinges with the provision of D type Aluminum alloy slim handle. The shutters are lockable with the help
of multipurpose square lock and tower bolt.
VC CHAIR
VISITOR / CLASSROOM / FIXED CHAIR is a ergonomic robust and comfortable solution for Visitor / Classroom / Computer seating. The Seat is made
with 60mm thick PU foam pasted on 12mm thick plywood upholestred with mesh fabric. Backrest made in PP with mesh fabric having adjustable
lumber support. the Seat and Backrest are mounted on cantilever base frame made up of CRCA round pipe with 25mm diameter and 2mm wall
thickness. The base frame is epoxy power coated up to 60micron. Antyskid plastic buffers are provided at chair bottom.
#REF! NOS. 3.00 3.00 10521.00 31563
Rate Amount
Sr
Description of Item IMAGES FOR REFERENCE Unit TOWN DSR (without DSR (with
No. TOTAL QTY NSI DSR (without GST ) NSI
OFFICE GST ) GST )
ST
Size : 400 x 350 x 400mm
#REF! The Top, top support panel, bottom panel and the corner shaped legs are made up of 12mm thick prelaminated particle NOS. 2.00 2.00 4515.00 9030
board. All the exposed edges shall be sealed with 2mm thick PVC edgeband and Non-exposed edges with 0.8mm thick PVC
edgeband with help of hot-melt glue.
MB CHAIR
MEDIUM BACK chair is ergonomic solution for seating work. The revolving office chair having push back mechanism for backrest made
#REF! in molded PP upholstered with mesh fabric for better ventilation.seating position height adustable up to 90mm with armrest adjustable in NOS. 3.00 3.00 12945.00 38835
vertical and horizontal direction. Chair having single tilt lock and externaly mounted adjustable lumbersupport.
#REF! #REF!