Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

Krushi Jivan Vikas Pratishtan- Yenbodi, Reg.

No F-294
BALLARPUR INSTITUTE OF TECHNOLOGY,BALLARPUR-
44270
BTC-SCHOOL OF DIPLOMA IN ENGINEERING POLYTECHNIC (1543)

A PROJECT REPORT
on
SOLAR PANEL CLEANING ROBOT
in
DEPARTMENT OF ELECTRONICS AND TELECOMMUNICATION
ENGINEERING

Submitted for the partial fulfillment of the requirement in curriculum of final year in “I” – scheme

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION ,MUMBAI

SUBMITTED BY

Miss.Nikhita .R. Wandhare (Enroll. No.2115430123)


Miss. Mayuri K. Lonare (Enroll. No.2215430228)
Miss. Siddhi A. Bawane (Enroll. No.2215430372)
Miss. Khushi S. Moon (Enroll. No.2215430379)

UNDER THE GUIDANCE OF


PROF. GAYATRI PATLE

Department of Electronics and Telecommunication Engineering


2023-2024
CERTIFICATE

This is to certify that the project entitle is successfully completed for the fulfillment of the
requirement in final year of Electronics and Telecommunication Engineering “I” – scheme
curriculum prescribed by Maharashtra State Board of Technical Education, Mumbai.

Place: BIT ,Ballarpur(1543)


Date:

Prof. Gayatri Patle Prof. Balvir Chand Prof. S.S. Goje


Project Guide Head of Department Principle

Dated Signature Dated Signature Dated Signature


ACKNOWLEDGEMENT
It is our great pleasure to present this project report with all our efforts to fulfill it in all aspects.We would
like to thank our Project Guide. Miss Gayatri Patle Assistant Professor, Department of Electronics and
Telecommunication for her valuable guidance and all her support.
We would like to thank Prof . Balvir Chand Head of Department for his consistent supervision.
We would like to thank Prof. Shrikant S.Goje, Principal of our institute for motivating and inspiring us. Lastly we
would like to thank all the group members who took great efforts and worked hard to complete it.

Project Group Members:


(1) NIKHITA .R. WANDHARE
(2) MAYURI .K. LONARE
(3) SIDDHI .V. BAWNE
(4) KHUSHI .S. MOON
INDEX

Sr.
Particulars Page Number
No.

1 INTRODUCTION 1

2 HARDWARE 2-13

3 SOFTWARE 14-16

4 WORKING 17-18

5 18
CIRCUIT DIAGRAM &
6 18
FLOW CHART
7 19-21
CODE
8 22
APPLICATION OF PROJECT
9 22
LIMITATIONS OF PROJECT
10 22
CONCLUSION
11 23
REFERENCES
12 24
OUTPUT

You might also like