UA SD-1 User Guide

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Universal Audio, Inc.

4585 Scotts Valley Drive, Scotts Valley, CA 95066 USER GUIDE


www.uaudio.com
Congratulations Specifications
Your new UA Standard SD-1 Dynamic There are two control switches below the Description
Microphone is designed to deliver years XLR connector. Move switch #1 to its up Professional End-Address
of uncompromising sonic performance. position ( ) to reduce low frequency Broadcast Microphone
rumble. Move switch #2 to its down Type
The SD-1 is a high-quality dynamic position ( ) for a gentle boost in the Dynamic
broadcast mic suitable for a wide range vocal articulation range. For a fuller sound, Polar Pattern
of professional audio applications. With move the mic closer to the source. Cardioid
its cardioid polar pattern and smooth, Frequency Response
transparent sound, it's particularly well The SD-1 comes with convenient Apollo 50 Hz – 16 kHz
suited for capturing both music and Channel Strip Presets. These downloadable Output Impedance
speech. settings for UA's Apollo audio interfaces 200 Ohms
give you professional results, instantly. Sensitivity
-58 dB (0 dB = 1V/Pa at 1 kHz)
Adjustable Controls
Get Apollo Interface Presets Low Cut Filter (200 Hz): Off, On
Articulation Boost (3 – 5 kHz): Off, On
To get custom Apollo Channel
Strip Presets, scan the QR code Output Connector
or visit uaudio.com/mics/presets Balanced XLR3, pin 2 hot

Universal Audio, Inc.

10005621R8

You might also like