Job Responsibilities: Duties will include the following:
o Experience in preparation of Offshore / Subsea Pipeline & Subsea Cable Design documents independently in compliance with latest DNV codes of standards and complete the design activities within specified schedule & budget. o Shall work under the supervision of Lead engineer for the project with effective communication with Engineers and Designers. o Should be able to guide Engineers & Designers on technical and non- technical issues towards effective solutions. o Capable of executing multiple tasks and delivering it efficiently within specified schedule.
Experience in working on Offshore / Subsea Pipeline & Subsea Cable
design activities (Mandatory Requirement) such as; o Preparation of Offshore / Subsea Pipeline & Subsea Cable Basis of Design document o Offshore / Subsea Pipeline and Subsea Cable Route selection studies o Offshore / Subsea Pipeline Coating Selection studies. o Offshore / Subsea Pipeline Wall thickness design as per DNV OS F 101 (Latest code) o Offshore / Subsea Pipeline Expansion Analysis o On-Bottom Stability studies for Offshore / Subsea Pipeline & Subsea Cable (As per DNV RP F 109 latest DNV Code and hands-on experience in executing DNV’s STABLELINES Software). o Offshore / Subsea Pipeline FREE span analysis (As per DNV RP F 105 latest DNV Code and hands-on experience in executing DNV’s FATFREE Software). o Offshore / Subsea Pipeline Cathodic protection studies (As per Latest DNV RP F 103). o Offshore / Subsea Pipeline Crossing analysis using CAESAR software o Subsea Cable Crossing Analysis using ORCAFLEX Software o Offshore / Subsea Pipeline crossing support design. o On-bottom roughness analysis of Offshore / Subsea Pipeline using SAGE PROFILE / ABAQUS software o On-bottom roughness analysis of Subsea cable using ORCAFLEX software o Offshore / Subsea Pipeline and Riser protection studies as per DNV RP F 107 & As per Latest DNV Codes. o Riser Flexibility stress analysis including VIV studies. o Riser Fatigue design studies (As per Latest DNV Codes) o Offshore / Subsea Pipeline laying and Riser installation studies using OFFPIPE / ORCAFLEX software o Subsea Cable Installation analysis using ORCAFLEX Software. o Offshore / Subsea Pipeline Upheaval and Lateral Buckling analysis (Detail Global Buckling Analysis using ABAQUS FEM software is preferred). o Preparation of Offshore / Subsea Pipeline Material and Construction specifications. o Construction and Procurement support. Shall have experience in preparation of Material requisition, Technical bid evaluation and Purchase requisitions. o Offshore / Subsea Pipeline & Subsea Cable Material, Construction associated Cost estimation. o Specific knowledge on Waves machines and Structural dynamics related to Offshore Pipeline / Subsea cable analysis & Design is must. o Design and Review of Offshore / Subsea Pipeline & Subsea Cable drawings Overall Field layout and Route drawings Route Drawings Platform approach drawings Alignment sheets Riser / J Tube General arrangement drawings Offshore Pipeline & Subsea Cable crossing drawings Anode detail drawings etc o Technical discussions with the client, project manager and other discipline leads to resolve the project issues. o Preparation of other technical reports as required by the project. o Quality Assurance – Responsible for working within the provisions and guidelines of the Worley Quality Assurance system relevant to the Oil & Gas Business Unit o Safety – Responsible for personal safety & safe working practices for the Oil & Gas Business Unit. Essential Skills & Experience
Preferred Experiences
o Working experience in an engineering consultancy in a multidiscipline
environment. o 10 + Years design experience in the Offshore Pipeline & Subsea cable Design with experience in FEED and detailed design of Oil and Gas pipelines. o Good knowledge of relevant international codes & standards e.g. DNV, API, ASME, NACE, BS etc. o Computer skills particularly in the use of DNV Software, STABLINES & FATFREE, CEASER, ORCAFLEX, SAGE PROFILE software and knowledge of MS Office, MathCad, C & C++ language etc. o Hands on experience in ABAQUS Finite Element Software is essential.