Professional Documents
Culture Documents
Boway Manual Book for 330 Digital Creasing Machine 2013.12.18 Eng. 中性
Boway Manual Book for 330 Digital Creasing Machine 2013.12.18 Eng. 中性
Notice
If you don’t understand somewhere, please contact the agents in your local area.
Please read this handbook carefully before using this machine. That will help you to improve your control skill to make perfect
products。
-04-
Foreword
Thank you for choosing the products in our company. Please read this handbook carefully, and pay attention to every
detail in operating. This will improve your crease quality and creasing speed.
These machines have been produced on the abundant technical basis. We carry out strict quality control from designing
and developing to purchasing material and producing. It reflects fully the aim of “doing better and better, customers’
satisfaction” in our company. Our products have its characteristics of beautiful figuration, high efficiency, easy operation and
favorable price. It’s the best choice for creasers of the office automatic equipment on post print
These products help you on the way to success!
Safety precaution:
You need to operate these products carefully. Don’t put hands or other things on the moving parts. To avoid the accident,
please pay attention to the following safety precaution when your operate or maintain these machines!
Riding position:Please fix the machine at the stable and solid place with ventilation.
Power supply:Please follow the instruction with the machine to connect the power supply correctly, If the voltage it is
Too lower or much beyond the set voltage, it will cause the machine working abnormally.
Earthing: For your safety, please use the power socket with grounding wire.
Overload:Please don’t connect one more electrical equipment to one power socket. Because overload is easy to cause
fire and electric shock.
Cleaning: Before cleaning the machine, please turn off the power switch and pull of the power plug.
-05-
The Following Labels of Warning can be found on the machine:
1、Unpacking and Checking -06-
When you open the package, please check the machine and accessories. If they damaged or incomplete, please contact the
agents, resells or the head company.
1、 Main body.....…………………1unit
2、 Instruction……………………1pc
3、 Warranty Card...………………1pc
4、 Tool……………………………1set
1) Manual Feeding 1) Friction Feeding 1)Up Suction of Feeder
1.1Unpack &
Install:
When you unpack, please loose
the knurled screw (Don’t loose Please remove the holder used for
the other one),then to turn up transportation, and then turn over this
the card board and screw the supporting board!
knurled screw again(You can
adjust the angel and speed
according to the paper you feed)
·Please keep the package box and plastic bag for the second transportation.
2.1 Product model: the parts of the model with manual feeder -08-
Collecting bar
Support board
plate
Paper table
Left guider
Side guider Power wire
Air switch
Power switch
Start button
LED screen
Operation box
Cabinet
EMS (can’t be
The wheel with brake used as power
switch)
2.2 Product Mode: the parts of the model with friction of lifting feeder -09-
Date line only for the
binder with creasing Adjustable handle of paging Back cover
Safety cover
Friction assembly
Collecting bar
Adjustable handle
Paper table of side guider
Right side guider
Side guider
Supply table
Front cover Dam board
Left side guider
Support board
Start button
The wheel with brake
Cabinet
LED screen
2.3Product model: the parts of the up-suction of lifting feeder -10-
Adjustable handle of suction
Installation screw of mould Adjustable handle of paging Adjustable screw of airflow
Adjustable handle of up-limit paper
Date line only for the
binder with creasing Adjustable handle of side guider
) Right side guider
Collecting bar
Dam board
Side guider Supply table
Paper table Support board
EMS (can’t be used as Left side guider
power switch) Power wire
Air switch
Cabinet
Lifting switch
Power switch
The wheel with brake
Start button
LED screen
Cabinet
3、Technical parameter of the equipment -11-
Note : If the design has changed and been different from the following form, please consider your machine as the standard and our
company won’t notice you any more.
√stand for: standard layout ●stand for:option ×stand for:Don’t have it.
Model Feedwidth Paperlength Paperweigh Speed Feeding Singlesidecrease Doublesidescrease Verticalcutting Horizontal Slit Roller Rollerperforate Perfo-rate Blackmark punch Dataread Power supply Netweight(kg)
mm g/m2 (sheet/H) system cutting crease
50Hz(60Hz)230W
50Hz(60Hz)230W
50Hz(60Hz)230W
up-suction 50Hz(60Hz)1800W
50Hz(60Hz)230W
50Hz(60Hz)230W
up-suction 50Hz(60Hz)1800W
-12-
Model Feedwidth Paperlength Paperweigh Speed Feedingsystem Singleside Doublesides Vertical Horizontal Slit Rollercrease Roller Perfo-r Black punch Dataread Power supply Netweight(kg)
mm g/m2 (sheet/H) crease crease cutting cutting perforate ate mark
Q330A 120-320 80-999 80-400 8000 manual × × √ √ × × × × √ × × AC220V(110V)+-10% 98
50Hz(60Hz)230W
Q330B 150-320 140-999 80-300 8000 friction × × √ √ × × × × √ × × AC220V(110V)+-10% 100
50Hz(60Hz)230W
Q330C 165-320 140-999 80-400 8000 Vacuum × × √ √ × × × × √ × × AC220V(110V)+-10% 115
up-suction 50Hz(60Hz)1800W
S330A 120-320 80-999 80-400 8000 manual × × × × × × × × × √ × AC220V(110V)+-10% 98
50Hz(60Hz)230W
S330B 150-320 140-999 80-300 8000 friction × × × × × × × × × √ × AC220V(110V)+-10% 100
50Hz(60Hz)230W
S330C 165-320 140-999 80-400 8000 Vacuum × × × × × × × × × √ × AC220V(110V)+-10% 115
up-suction 50Hz(60Hz)1800W
QM330 120-320 80-999 80-400 8000 manual √ √ √ √ √ √ √ √ √ √ √ AC220V(110V)+-10% 120
A 50Hz(60Hz)230W
QM330 150-320 140-999 80-300 8000 friction √ √ √ √ √ √ √ √ √ √ √ AC220V(110V)+-10% 125
B 50Hz(60Hz)230W
QM330 165-320 140-999 80-400 8000 Vacuum √ √ √ √ √ √ √ √ √ √ √ AC220V(110V)+-10% 135
C up-suction 50Hz(60Hz)1800W
4、The function of control component and operation panel -13-
Air Switch : Pull to “ON”, the machine is electrified. Pull to Power Switch : Pull to “ON”, the machine is
“OFF”, the power fails. electrified. Pull to “OFF”, the power fails.
EMS : Turn “EMS” anticlockwise, the EMS pop up, the Start Button :When everything gets ready, press “Start
machine is electrified. Press “EMS”, the power fails. Button”, the machine start to work.(Quickly press this
Note : It’s used in the emergency circumstances, can’t be key two times, the machine will feed one piece of
You can control this machine on the LCD touch screen. It’s very
convenient. You just need to regulate the machine with your figures to
click the responding position. When the machine is turned on, the LCD
Testwaysoptionoffrontedge
positionorblackmark
2. Count When you click the key, it turns blue. And then you can import the number you need
via the right keyboard. You can use the C keys to clear your setting.
4. Prompt dialog box All kinds of operating prompts and the warnings will display in this area.
5. Data map of creasing When you choose the standard of creasing you need, the corresponding map and data
will display on the main interface of creasing. You can depend on your need to revise
the value and the sides of creasing. After revising, you can save it as the custom data.
6. Clock You can revise it on the menu of “Date” in “Set key”. If it can’t often display the
parameter which needs to be revised, and then revise the parameter via this key.
9. C key of numbers The parameters you choose or import can be cleared by this key.
10. Enter key When you import the parameter, please click this key to confirm. But if you can’t
11. Single sheet You can choose two ways via this key: single sheet feeding or continuous
/continuous optional
feeding.
key
12. Speed key You can change the speed from 1 Level to 5 Level via this key.
13. When you set the data by yourself, you can click the key to enter into the save
Data save key
interface, choose the number of position that you want to save in, and then click
the same icon in the save interface, the data is saved.
14. Option datum When you click the key, you can enter into the interface to choose all kinds of
The number of files
common datum and the self-defining datum.
15. Menu of creasing Creasing, punching and perforating.
16. On-off key of creasing You can use this key to turn off the function of creasing and punching, just keep
thickness of the book. You can first choose the number of programs, and click
this key, then the thickness will display beside the number.
18. Key of cutting, The main menu in cutting mode
perforating and
punching
19. Click this key to enter into an interface where you can change the language,
Set key
metric/ inch, self-check, parameter, date and brightness.
20. Help key Click this key to enter into an interface where you can see the help file, the
24. Shift key of creasing You can change the sides of creasing via this key.
side
25. The number of You can alter the datum you want via the keyboard. You can know the position of
programs/Data of
thickness of book from the red number.
creasing position
26. Data map of cutting When you choose the common datum of cutting, the relevant map and datum will
display on the main interface of cutting. You can alter the datum according to
Note:When the machine is working, to avoid being hurt, please don’t put hands and hair near the machine.
5.1 If the side guiders are too tight to paper pile,the feeder can’t feed well. When it happens, you can knock the movable side
guider make it has a little gap from the paper pile.
5.2 Some printed paper has talcum powder, which will cause the slip between the friction wheel and paper. So please clean the
friction wheel by the cleaner in time.
Notes: Unsuitable paper could make paper jam. When it happens, please check if it is the following issues.
1) The thickness of paper: (≥ 0.30 mm), (≤0.1mm); 2) For the same kind of paper, mixed paper can’t feed well.
3) The paper pile is too high, isn’t over 80mm; 4) Paper is too wet or static;
5) Side guiders are too tight near paper pile: It’s better for them just to touch the side of paper pile;
6) Paper is too curly.
Frictionwheelassembly
Pager
Sideguiderscrew
(Picture 1) (Picture 2)
Regulation of “the pressure of pager”:
Light paper:Regulate “the pressure of pager” to the maximum level (as the above picture 1)
Heavy paper:Regulate to the contrary.
The replacement of pager:You can take out of the friction wheel assembly as the above picture 2. And then you can
replace the friction wheel and pager.
5.4、The machines with pneumatic lift: The regulation of pager, suction, blowing and side guiders -25-
Adjust “Side guider wheels” to change the feeding width and angle.
A: Screw of wind power: for the B:Screwofpager:Forheavypaper,totheupper;forlight C. Suction power handle: For
heavy paper, to the maximum (up); for paper, to the downward (There is not the part for the old heavy paper, to the maximum (left);
thelightpaper,totheminimum(down) model.YoucanregulateEtofulfilthisfunction.) for light paper, to the minimum
(right)
D Sideguiderwheels
E. Up-down screw of blowing gate:
fornewmodel,don’tneedtoregulateit.
YoujustneedtoregulateB.
F:Screwofupperlimitofpaper:Forheavypaper,to
G:Up-downbuttonofsupplytable theupper;forlightpaper,tothedownward
There are three status which can make paper jam, as the above “Ⅰ”“Ⅱ”“Ⅲ”:
5.51 Ⅰ: When paper jam happens here, the screen can display like that: or you click “set key” to -27-
“Handle interface of paper jam”, then use these arrows to make paper out.
Feeding backward
Blade downward
5.52 Ⅱ: (Please turn off the power before cleaning)When paper jam happens here, put your hand
into the waste paper box, pick the jam paper out. Or you can loosen “Assembly and disassembly screw
of moulds”, and pick out the paper.
5.53 Ⅲ:When paper jam happens here, turn over the front cover and loosen “the total screw of feeding”,
then you can clean it.
6、The operation of crosswise cutting and lengthwise cutting -28-
6.1 The operation and process of cutting
Turn on the power switch. After the machine resetting, the screen will display the original interface. Please
choose “Key of cutting, perforating and punching”.
Note: Please test this machine as the following process, when you first use this machine.
PressStartbuttontowork Adjustpagerorsuctionandblowingpower
Press“Startbutton”tocut
6.2 Introduction of cutting mode -29
Two standards can be selected:1) Front edge:use the front of paper to be the standard 2)Mark■:use the black mark which is
printed first as the standard
Printing condition of Mark■ on the paper:
Necessary conditions of setting cut size: -30-
Note: If the set value can’t meet the conditions above, it will cut inaccuracy and
make paper jam.
6.3 The specification of cutting: -31-
This machine has 6 common cutting modes for A4 and A3. You can depend on your need to choose.
⑴ A4--1: 89mm×45mm, select 2 or 3 lines and 89mm for lengthways cut, 2 rows and 5 lines are total 10 cards;
⑵ A4--2: 89mm×50mm, select 2 or 3 lines and 89mm for lengthways cut, 2 rows and 5 lines are total 10 cards;
⑶ A4--3: 89mm×54mm,select 2 or 3 lines and 89mm for lengthways cut, 2 rows and 5 lines are total 10 cards;
⑷ A4-04: 3.5″×2″mm,select 2 or 3 lines and 89mm for lengthways cut, 2 rows and 5 lines are total 10 cards;
⑸ A4--05: 89mm×95mm ,select 2 or 3 lines and 89mm for lengthways cut, 2 rows and 3 lines are total 6 cards;
⑹ A4--06: 89mm×127mm,select 2 or 3 lines and 89mm for lengthways cut, 2 rows and 2 lines are total 4 cards;
⑺ A3--01:89×45mm, select 3 lines and 89mm for lengthways cut, 3 rows and 8 lines are total 24 cards;
⑻ A3--02:89×50mm, select 3 lines and 89mm for lengthways cut, 3 rows and 7 lines are total 21 cards;
⑼ A3--03:89×54mm, select 3 lines and 89mm for lengthways cut, 3 rows and 7 lines are total 21 cards;
⑽ A3--04:89×90mm, select 3 lines and 89mm for lengthways cut, 3 rows and 4 lines are total 12 cards;
⑾ A3--05:89×95mm, select 3 lines and 89mm for lengthways cut, 3 rows and 4 lines are total 12 cards;
⑿ A3--06:89×127mm, select 3 lines and 89mm for lengthways cut, 3 rows and 3 lines are total 9 cards;
Here is every specification of standard typesets: -32-
-33-
-34-
-35-
-36-
-37-
6.4 Picture introduction of cutting: When you set the mode of card 89×95 and photo 89×127,you -38-
6.5 should pull out the card box as the following picture:
7. The operation and process of creasing -39-
Turn on the power switch. After the machine resetting, the screen will display the original interface. Please
choose “Menu of creasing”.
Note: Please test this machine as the following process, when you first use this machine.
PressStartbuttontocrease Adjustpagerorsuctionandblowingpower
Press“Startbutton”tocrease
7.1 Adjustment and replacement of assembly creasing and punching -40-
7.11 The adjustment of the creasing depth: the depth of creasing affects the effect of creasing and life of
machine. There are four common phenomenons as following
Normal
Too light
Too deep
If it happens as above, you can deal with it as the following: Open the front cover to adjust the
depth of creasing and perforating.
-41-
Pressure handles. (Clockwise is light,
anticlockwiseisheavy)
Assemblyhandle
Assemblyfastenscrew(4inall)
Notes: When you install the model, pay attention that the “Total
direction block” must towards to the black cover.
8. Slitting, cutting and creasing -42-
Rollerwheels
Fastenscrewofrollerwheels
Rubberwheels
Pressurescrew
Rollerwheels (Everywheelhasit)
Perforatingwheel
Creasingwheel
Totalfastenscrew
Perforatingwheel
8.1 How to use the functions of cutting, slitting and perforating -43-
8.11 Prepare for working;
8.12 Check if the safety cover is put down;
8.13 Check if the collect device is well;
—完—