Professional Documents
Culture Documents
4195 Svul M VD 002 034
4195 Svul M VD 002 034
S
1/4"
1/4" S E
R1T185L483-S4D0661T2-SL-6HN31
ORDER CODES
1-0 1-1 1-2 2-0 3-0 4-0 4-1 4-2
Example Order Number: R1T185L 48 3 - Select Thermowell Part # or
Insert 3 Digit Length Code
- SL - 8HN 31, T- Select Type and Range
from back of section
RAF185L RAF285L Class A (specify "E" length in inches) (specify "E" length in inches)
A B272101
purpose housing = ±2°
38 3/16 TOLERANCES ANGULAR DIM
(4 to 20) mA dual input HART® transmitter
Thiswith digital is
document display and
PROPRIETARY to
36T82-D10
48 1/4 FRACTION DIM = ±1/32" general-purpose
DRAWNaluminum
BY: housing with glass
DATE: lidPyromation, Inc.
DECIMAL DIM .XX J. BROWN
= 49±0.010"Flip-top aluminum head 4/12/2011
2-0 DECIMAL DIM .XXX = ±0.005"
1-2 Element 63 White polypropylene screw-cover head
Select thermowellANGULAR DIM = ±2°
Connection 91 316 L stainless steel screw-cover head
part number from This document is PROPRIETARY to
CODE DESCRIPTION Pyromation,4-2
Inc. Options FORT WAYNE, INDIANA 260-484-2580
Thermowell Section,
2 2-wire element or specify 3 digit "S" W[1] Epoxy Coating
3 3-wire element length in inches if no
thermowell is required. GS Ground screw
4[1] 4-wire element
I Stainless tag
[1] Not available in duplex or NB 1/2" NPT nylon conduit reducer bushing
with 440 Series Transmitter
SB 1/2" NPT conduit reducer bushing
3-0 Element Options T-440 (4 to 20) mA head-mounted RTD transmitter
CODE DESCRIPTION T-441 (4 to 20) mA isolated head-mounted transmitter
SL [1]
Spring-loaded element T-442 (4 to 20) mA isolated HART® head-mounted transmitter
SC Self-contained spring-loaded element T82-00 (4 to 20) mA dual input HART® head-mounted transmitter
See transmitter ordering information in back of section.
Self-contained spring-loaded element with
SN [1] Available with option 31 only.
Buna-N oil seal 121°C [250°F] 100 PSI Max.
[1] Not available with option 35T-642A HART® is a registered trademark of HART Communication Foundation.
371-4 Phone (260) 484-2580 • FAX (260) 482-6805 or (800) 837-6805 • www.pyromation.com GP-3
PRO/IMD-BNX-999000731/000/00
Configuration Code TW01
THERMOWELLS Drilled Thermowells
The drilled thermowells listed below are those most commonly found in process applications. Other types and styles
are listed later in this section. The thermowells listed below are available as separate component wells and can
be ordered by the code numbers listed below. They can also be ordered as a part of a complete sensor assembly.
Consult factory for wells with different mounting threads, lengths, and materials.
STANDARD-DUTY WELLS STRAIGHT-SHANK, SOCKET-WELD
1/4" S 1/4" S
P
BORE SIZE Q BORE SIZE Q P
1/2 NPT 1/2 NPT
V 2 1/2" U 1 3/4" + T
U 1" T 3/4"
(OPTIONAL)
1/4" S 1/4" S
P
BORE SIZE Q BORE SIZE P
1/2 NPT 1/2 NPT
V V U 1 3/4" + T
U 1" T 3/4"
(OPTIONAL)
R1T185L483-S4D0661T2-SL-6HN31
ORDER CODES
1-0 1-1 1-2 1-3 1-4 1-5 1-6
CODE
"S" "U" DIMENSIONS
DIMENSIONS NO LAG WITH STANDARD
TOLERANCES
±1/32"
A B276701 = ±1/32"
TOLERANCES
FRACTION DIM
LAG = 1-4 Material
DRAWN BY: FRACTION DIM
DATE: D
DECIMAL DIM .XX = ±0.010" J. BROWN DECIMAL DIM .XX = ±0.010"
4/26/2011
04 4 2(1/2) N/A DECIMAL DIM .XXX = ±0.005"
CODE DESCRIPTION DECIMAL DIM .XXX = ±0.005"
ANGULAR DIM = ±2° ANGULAR DIM = ±2°
06 6A 4(1/2)REMOVED
2(1/2)INCH MARK (") FROM NPT CALLOUT 8 316 stainless steel
This document is PROPRIETARY to
JB 5/25/2011 This document is PROPRIETARY to
09 9
REV 7(1/2) 4(1/2) DESCRIPTIONPyromation, Inc. 61 A105 Carbon
FORT BY Steel
WAYNE, DATE
INDIANA 260-484-2580
Pyromation, Inc.
12 12 10(1/2) 7(1/2)
15 15 13(1/2) 10(1/2)
18 18 16(1/2) 13(1/2)
24 24 22(1/2) 19(1/2)
TW-2 Phone (260) 484-2580 • FAX (260) 482-6805 or (800) 837-6805 • www.pyromation.com 90-9
PRO/IMD-BNX-999000731/000/00
General RTD Specifications
Element Connections
Two-Wire: Provides one connection to each end of the element. This construction is suitable where the resistance of the lead
wire may be considered as an additive constant in the circuit, and particularly where the changes in lead resistance due to
ambient temperature changes may be ignored.
Three-Wire: Provides one connection to one end of the element and two to the other end of the element. Connected to
an instrument designed to accept three wire input, sufficient compensation is usually achieved for leadwire resistance and
temperature change in leadwire resistance. This is the most commonly used configuration.
Four-Wire: Provides two connections to each end of the element to completely compensate for leadwire resistance and
temperature change in leadwire. This configuration is used where highly accurate temperature measurement is vital.
2-WIRE SINGLE 2-WIRE DUPLEX 3-WIRE SINGLE 3-WIRE DUPLEX 4-WIRE SINGLE 4-WIRE DUPLEX
WHITE
WHITE WHITE
WHITE WHITE
WHITE WHITE
WHITE WHITE
WHITE WHITE
WHITE GREEN
GREEN WHITE
WHITE GREEN
GREEN
WHITE GREEN
WHITE
WHITE
WHITE GREEN
WHITE
WHITE WHITE GREEN GREEN
GREEN WHITE WHITE
WHITE GREEN GREEN
GREEN
BLACK
BLACK BLACK
BLACK
BLACK RED RED RED BLACK
BLACK BLACK
BLACK
RED RED RED BLACK BLACK RED RED RED BLACK
RED RED RED
RED RED RED RED RED RED RED RED RED BLACK BLACK
BLACK
WHITE
UNCOMPENSATED
2-WIRE CIRCUITS
LEADWIRE- RESISTANCE-
WIRE OHMS PER MAX. LENGTH
ERROR IN °F
GAUGE FOOT FOR 1 °F
PER
ERROR
WHITE DOUBLE FT. FOR:FOR:
FOR:
@ 20 °C [68 °F]
PYROM
PYR
PYROMAT
30 0.133 0.81 ft 1.24 °F
28 SPEC
SPEC SPEC
NO: NO:0.0851
NO: 1.26 ft TITLE:
0.79 °F TITLE: TITLE:
RED
24 0.0333 3.2 ft 0.31 °F CATALOG
CATALOG
CATALOG PAGE
PAGE P
G
SIZE:SIZE:
SIZE: DWG.DWG.
DWG
N&
22 0.0213 5.1 ft 0.198 °F
NO.
B2
B
AAA B296
RED 20 0.0148 7.27 ft 0.14 °F
18 TOLERANCES
0.0083 TOLERANCES
TOLERANCES 13.0 ft 0.077 °F
16 0.0052 20.7 ft 0.048 °F
FRACTION
FRACTION
DIM DIM DIM = ±1/32"
= ±1/32"
= ±1/32" DRAWN
DRAWN
FRACTION DRAWN BY: BY: BY:
DECIMAL
DECIMAL
DIM DIM
.XX =
.XX
DECIMAL DIM .XX = ±0.010" ±0.010"
= ±0.010" J. BROWN
J. BROWN
J. BROWN
DECIMAL
DECIMALDECIMAL
DIM DIM
.XXXDIM
.XXX = ±0.005"
= .XXX = ±0.005"
±0.005"
ANGULAR
ANGULAR
ANGULAR DIM DIM = ±2°= ±2°
DIM = ±2°
This This This
document
document document
is PROPRIETARY
is PROPRIETARY
is PROPRIETARY to to to
Pyromation,
Pyromation,
Pyromation, Inc. Inc. Inc. FORT
FORT FORT
WAYNE,
WAYNE,
WAYNE, INDIA
IN
INDIANA
PRO/IMD-BNX-999000731/000/00
General RTD Tolerances
STANDARD PLATINUM RTD ASSEMBLIES - Pyromation standard RTD assemblies are constructed
using either wire-wound platinum elements or thin-film elements with a reference resistance of 100 ohms
at 0 °C, a temperature coefficient 0.003 85 °C-1 and which are in accordance with the following standards:
452-1 Phone (260) 484-2580 • FAX (260) 482-6805 or (800) 837-6805 • www.pyromation.com GEN-15
PRO/IMD-BNX-999000731/000/00
REXNORD P/N 10095581
Sensors with Configuration Code GP03
Spring-Loaded RTD/Thermowell Assemblies
Connection Heads with General-Purpose Connection Heads
Spring-Loaded RTD/Thermowell Assemblies with General-Purpose Connection Heads are designed for use with various thermowell types.
Complete assemblies can be ordered by selecting the RTD assembly below, the thermowell from the thermowell section of this catalog, and a
temperature transmitter from the back of this section. Assemblies without a thermowell can be ordered by selecting the sensor assembly from
this page and inserting the "S" length in table 2-0. These sensors are supplied with a 316 stainless steel sheath and are available in various
tolerances and temperature ranges as noted in the tables below. Note: The "S" dimension will measure 1/4" longer than specified when the spring
is in the relaxed postition. The "S" dimension is calculated when the sensor is compressed or in the installed position. This design allows 1/4"
spring compression to ensure positive contact with the bottom of the thermowell.
S
1/4"
1/4" S E
R1T185L483-010-SNZ-6HN31
ORDER CODES
1-0 1-1 1-2 2-0 3-0 4-0 4-1 4-2
Example Order Number: R1T185L 48 3 - Select Thermowell Part # or
Insert 3 Digit Length Code
- SL - 8HN 31, T- Select Type and Range
from back of section
RAF185L RAF285L Class A (specify "E" length in inches) (specify "E" length in inches)
A B272101
purpose housing = ±2°
38 3/16 TOLERANCES ANGULAR DIM
(4 to 20) mA dual input HART® transmitter
Thiswith digital is
document display and
PROPRIETARY to
36T82-D10
48 1/4 FRACTION DIM = ±1/32" general-purpose
DRAWNaluminum
BY: housing with glass
DATE: lidPyromation, Inc.
DECIMAL DIM .XX J. BROWN
= 49±0.010"Flip-top aluminum head 4/12/2011
2-0 DECIMAL DIM .XXX = ±0.005"
1-2 Element 63 White polypropylene screw-cover head
Select thermowellANGULAR DIM = ±2°
Connection 91 316 L stainless steel screw-cover head
part number from This document is PROPRIETARY to
CODE DESCRIPTION Pyromation,4-2
Inc. Options FORT WAYNE, INDIANA 260-484-2580
Thermowell Section,
2 2-wire element or specify 3 digit "S" W[1] Epoxy Coating
3 3-wire element length in inches if no
thermowell is required. GS Ground screw
4[1] 4-wire element
I Stainless tag
[1] Not available in duplex or NB 1/2" NPT nylon conduit reducer bushing
with 440 Series Transmitter
SB 1/2" NPT conduit reducer bushing
3-0 Element Options T-440 (4 to 20) mA head-mounted RTD transmitter
CODE DESCRIPTION T-441 (4 to 20) mA isolated head-mounted transmitter
SL [1]
Spring-loaded element T-442 (4 to 20) mA isolated HART® head-mounted transmitter
SC Self-contained spring-loaded element T82-00 (4 to 20) mA dual input HART® head-mounted transmitter
See transmitter ordering information in back of section.
Self-contained spring-loaded element with
SNZ [1] Available with option 31 only.
Viton oil seal.
[1] Not available with option 35T-642A HART® is a registered trademark of HART Communication Foundation.
371-4 Phone (260) 484-2580 • FAX (260) 482-6805 or (800) 837-6805 • www.pyromation.com GP-3
PRO/IMD-BNX-999000731/000/00
General RTD Specifications
Element Connections
Two-Wire: Provides one connection to each end of the element. This construction is suitable where the resistance of the lead
wire may be considered as an additive constant in the circuit, and particularly where the changes in lead resistance due to
ambient temperature changes may be ignored.
Three-Wire: Provides one connection to one end of the element and two to the other end of the element. Connected to
an instrument designed to accept three wire input, sufficient compensation is usually achieved for leadwire resistance and
temperature change in leadwire resistance. This is the most commonly used configuration.
Four-Wire: Provides two connections to each end of the element to completely compensate for leadwire resistance and
temperature change in leadwire. This configuration is used where highly accurate temperature measurement is vital.
2-WIRE SINGLE 2-WIRE DUPLEX 3-WIRE SINGLE 3-WIRE DUPLEX 4-WIRE SINGLE 4-WIRE DUPLEX
WHITE
WHITE WHITE
WHITE WHITE
WHITE WHITE
WHITE WHITE
WHITE WHITE
WHITE GREEN
GREEN WHITE
WHITE GREEN
GREEN
WHITE GREEN
WHITE
WHITE
WHITE GREEN
WHITE
WHITE WHITE GREEN GREEN
GREEN WHITE WHITE
WHITE GREEN GREEN
GREEN
BLACK
BLACK BLACK
BLACK
BLACK RED RED RED BLACK
BLACK BLACK
BLACK
RED RED RED BLACK BLACK RED RED RED BLACK
RED RED RED
RED RED RED RED RED RED RED RED RED BLACK BLACK
BLACK
WHITE
UNCOMPENSATED
2-WIRE CIRCUITS
LEADWIRE- RESISTANCE-
WIRE OHMS PER MAX. LENGTH
ERROR IN °F
GAUGE FOOT FOR 1 °F
PER
ERROR
WHITE DOUBLE FT. FOR:FOR:
FOR:
@ 20 °C [68 °F]
PYROM
PYR
PYROMAT
30 0.133 0.81 ft 1.24 °F
28 SPEC
SPEC SPEC
NO: NO:0.0851
NO: 1.26 ft TITLE:
0.79 °F TITLE: TITLE:
RED
24 0.0333 3.2 ft 0.31 °F CATALOG
CATALOG
CATALOG PAGE
PAGE P
G
SIZE:SIZE:
SIZE: DWG.DWG.
DWG
N&
22 0.0213 5.1 ft 0.198 °F
NO.
B2
B
AAA B296
RED 20 0.0148 7.27 ft 0.14 °F
18 TOLERANCES
0.0083 TOLERANCES
TOLERANCES 13.0 ft 0.077 °F
16 0.0052 20.7 ft 0.048 °F
FRACTION
FRACTION
DIM DIM DIM = ±1/32"
= ±1/32"
= ±1/32" DRAWN
DRAWN
FRACTION DRAWN BY: BY: BY:
DECIMAL
DECIMAL
DIM DIM
.XX =
.XX
DECIMAL DIM .XX = ±0.010" ±0.010"
= ±0.010" J. BROWN
J. BROWN
J. BROWN
DECIMAL
DECIMALDECIMAL
DIM DIM
.XXXDIM
.XXX = ±0.005"
= .XXX = ±0.005"
±0.005"
ANGULAR
ANGULAR
ANGULAR DIM DIM = ±2°= ±2°
DIM = ±2°
This This This
document
document document
is PROPRIETARY
is PROPRIETARY
is PROPRIETARY to to to
Pyromation,
Pyromation,
Pyromation, Inc. Inc. Inc. FORT
FORT FORT
WAYNE,
WAYNE,
WAYNE, INDIA
IN
INDIANA
PRO/IMD-BNX-999000731/000/00
General RTD Tolerances
STANDARD PLATINUM RTD ASSEMBLIES - Pyromation standard RTD assemblies are constructed
using either wire-wound platinum elements or thin-film elements with a reference resistance of 100 ohms
at 0 °C, a temperature coefficient 0.003 85 °C-1 and which are in accordance with the following standards:
452-1 Phone (260) 484-2580 • FAX (260) 482-6805 or (800) 837-6805 • www.pyromation.com GEN-15
PRO/IMD-BNX-999000731/000/00