Professional Documents
Culture Documents
SADE Yarnloving Girls ENG PDF Pattern
SADE Yarnloving Girls ENG PDF Pattern
Sade
Halime
its entirety or in parts. This pattern is for
personal use only.
2
ADDITIONAL INFORMATION: MATERIALS REQUIRED:
I recommend to look/read through the whole - Yarn – I used mix of different light weight yarn,
pattern before you start crochet. for example Hobbii Rainbow 8/4, Drops Safron,
Yarn&Colours Favorite, Scheepjes Catona. If you
This PDF includes links to Youtube. If the link doesn't making curly hair have at least a half skein.
work to click on, copy this link below and paste it - Crochet hook 2.0 mm
on a web browser. Now you will access my Youtube - Fibrefill / toy stuffing
channel: https://youtube.com/@crochetbyhalime - Security eyes, 7 mm
- Bendable 3 mm metallic wire
ABBREVIATIONS (inside arms and head)
ch chain/s - 1 mm metallic wire
slst slip stitch (for hook/needles)
sc single crochet - Scissor/cut tool for metallic
inc increase; crochet 2 sc in the same stitch - Grip tool
dec decrease; crochet 2 sc together - Textile clue (to keep the yarn on the mini-skeins)
hdc half double crochet - Stitch markers, scissor and embroidery needle
dc double crochet
trc treble crochet SIZE:
sc2tog crochet 2 sc together 15 cm (6 in.) in height while sitting with legs crossed.
st stitch(es) (Note! When using 2.0 mm crochet hook and
rnd round(s) light weight yarn.)
[…] x X repeat instructions in brackets X times
(..) total number of stitches in the round or row Note! Think about the environment and don’t print out.
If you do so, avoid printing the pages with full page-pictures.
3
let’s
begin
4
You need to make the arms first, since you will
crochet the arms to the body.
THUMB – Make 2
1. At round 5 of the hand it is time 2. Flatten the thumb, and insert the
to attach the thumb. Make 6 sc on hook across 2 stitches. SHIRT HEM Point the arm
downwards,
the hand. Hold the arm so the and insert the
hand is pointing down- hook into first
backloop
wards. Insert the hook in
first back loop of round
10. Make 1 ch, start on
same back loop and then make 8 hdc around the
arm. Make a slst on the first hdc and cut the yarn.
3. Now insert the hook into next 4. Insert the hook across next
Tie the yarn tails together and weave them in.
stitch of the hand and make a sc 2 stitches of the thumb and then into
through all stitches. next stitch of the hand. Make a sc.
CLICK HERE TO SEE VIDEO TUTORIAL ON YOUTUBE
Press and roll the hand so the thumbs pointing up-
wards on opposite of each other.
5. Push in the yarn tails into the 6. Thumb is done, now continue
hand with help of a scissor or with round 6.
pincett.
5
BODY & HEAD Rnd 11: In back loops; 32 sc (32)
Rnd 12-16: 32 sc – 5 rounds (32)
Start with desired pants color. Rnd 17: [dec, 14 sc] x 2 (30)
Make 6 ch. Rnd 18: 30 sc (30)
Rnd 1: Start on the second chain from the hook; 4 sc, Rnd 19: [dec, 13 sc] x 2 (28)
3 sc in last chain, turn and work on the opposite side Rnd 20: 28 sc (28)
of the chain; 3 sc, inc (12)
Rnd 2: inc, 3 sc, inc, 1 sc, inc, 3 sc, inc, 1 sc (16) Stuff the body with filling and keep doing as you go.
Rnd 3: 1 sc, inc, [3 sc, inc] x 3, 2 sc (20)
Rnd 4: inc, 7 sc, inc, 1 sc, inc, 7 sc, inc, 1 sc (24) Now it is time to insert the wire into the arms and
Rnd 5: inc, 9 sc, inc, 1 sc, inc, 9 sc, inc, 1 sc (28) crochet them into the body. Follow the steps on the
Rnd 6: 28 sc (28) pictures below or follow me on my youtube tutorial:
Rnd 7: [inc, 13 sc] x 2 (30) CLICK HERE TO SEE VIDEO TUTORIAL ON YOUTUBE
Rnd 8: 30 sc (30)
Rnd 9: [inc, 14 sc] x 2 (32) Rnd 21: Flatten the arm and place the arm against
Rnd 10: 32 sc (32) the body (make sure thumb is on correct side), and
make 4 sc across all the stitches on arm and body,
Change to desired shirt color. continue and make 10 sc, do the same on other arm
Continue on next column. and make 4 sc, continue and make 10 sc (28)
1. Use a bendable wire. 2. Start by bend the end of wire. 3. Squeeze it so it is not too wide. 4. Insert into the arm, all the way to
the end of the hand.
5. Bend the wire to make the neck 6. The neck should start from the 7. Make a big ring and then down 8. Place the arm next to the body to
middle of the body to neck and make the other arm. measure where to cut the wire.
9. Let the wire be little bit longer 10. Squeeze the end so it is not too 11. Insert the wire into next arm. 12. It will look like this. Now time to
then the arm. Bend this end. wide. attach the arms to the body.
13. Flatten the arm and insert the 14. Then insert the hook into next 15. Make a sc. 16. Do the same on next stitch of the
hook across 2 stitches. stitch on the body. arm and body.
Now on
the other
side of
the wire
17. On the third stitch you will now 18. Make next and last stitch for the 19. Do the same on the next arm. 20. Both arms are now attached to
insert the hook on the other side of arm. First 2 stitches on the right side of the body.
the wire. the wire and next 2 on left side.
6
If you will use security eyes, insert 7 mm eyes bet-
ween round 36 and 37, have 9 sticthes inbetween.
Note! Place the eyes centered aligned with rest of the
body and make sure that the thumbs are on correct
side!
Add the last filling for the body and change to Rnd 42: 3 sc, dec, [6 sc, dec] x 5, 3 sc (42)
desired skin tone color. Rnd 43-44: 42 sc – 2 rounds (42)
Rnd 45: [5 sc, dec] x 6 (36)
Rnd 24: In back loops; [dec] x 9 (9) See below. Rnd 46: 36 sc (36)
Rnd 9: 9 sc (9)
Rnd 10: In back loops; 9 sc (9)
Rnd 11: inc, 4 sc, inc, 2 sc, inc (12)
Rnd 12-17: 12 sc – 6 rounds (12)
Rnd 18: 3 sc, make 12 ch, skip the next 6 stitches,
continue and make 3 sc (6+12ch) See below.
Continue on next column.
1. On rnd 18, make 3 sc and then 2. Skip 6 stitches and make a sc on 3. Make sure the chain is not 4. On rnd 19 you do first 3 sc. Then
12 chains. next stitch. twisted. you will continue on the chain.
crochet
on the
bumps
behind
the chain
5. Crochet on the bumps behind the 6. Make sure that you start on correct 7. Back to the base where you will 8. Now continue and crochet the
chain. bump. Total 12 bumps on the chain. make 3 sc. last 2 rounds.
9. Fasten off and cut the yarn after 10. With needle insert the needle 11. Close the hole. 12. Insert the needle into the hole in
leaving a small yarn tail. into each front loop of last round. the middle.
13. Pull tightly from the inside so the 14. Weave in the yarn tail in the
hole is completely closed. inside of the leg.
8
PANT HEM Rnd 2: [dec] x 4, 8 sc, dec (13)
Hold the foot pointing down. Insert the hook first Rnd 3: 13 sc (13)
back loop of round 10. Make 1 ch, start on same Rnd 4: 2 sc, inc, 10 sc (14)
back loop and then make 9 hdc around the foot. Rnd 5: 2 sc, [inc] x 2, 4 sc, [inc, 2 sc] x 2 (18)
Make a slst on the first hdc and cut the yarn. Tie the Rnd 6: 18 sc (18)
yarn tails together and weave them in. See below. Rnd 7: 2 sc, [dec] x 2, 12 sc (16)
Rnd 8: 16 sc (16)
1. Start on the first unworked stitch 2. Now make a sc2tog in the area 3. Insert the hook into the area 4. Yarn over and pull up a loop.
and make 6 sc. after last stitch and first chain. between last stitch and first chain.
5. Insert the hook into first chain. 6. And pull up a loop. 7. Now you have 3 loops on the 8. Pull through all loops. You have
Yarn over. hook. Yarn over. now done a sc2tog.
9. Continue and make 10 sc. 10. On other side you will make 11. Make a sc2tog. This is last stitch 12. Now continue crochet rest of the
next sc2tog – last chain and the for this round. rounds to make the upper leg.
area before first stitch.
9
EARS – Make 2 HAIR VERSION 1
Start with desired skin tone color. Start with desired hair color.
Rnd 1: 5 sc in a magic ring (5) Rnd 1: 6 sc in a magic ring (6)
Cut a long piece of yarn and pull it through the last Rnd 2: [inc] x 6 (12)
stitch. Tighten the magic ring, but make sure that the Rnd 3: [1 sc, inc] x 6 (18)
piece is like a half moon. Rnd 4: [2 sc, inc] x 6 (24)
Rnd 5: [3 sc, inc] x 6 (30)
Rnd 6: 2 sc, inc, [4 sc, inc] x 5, 2 sc (36)
Rnd 7: [5 sc, inc] x 6 (42)
Rnd 8-9: 42 sc – 2 rounds (42)
Rnd 10: 3 sc, inc, [6 sc, inc] x 5, 3 sc (48)
Rnd 11-18: 48 sc – 8 rounds (48)
Rnd 19: 2 hdc, 2 dc, 1 hdc, 2 slst, 1 dc, 3 trc,
3 dc, 2 hdc, 2 sc, 1 slst, skip rest of the stitches,
leave a long tail and cut the yarn, pull it through the
slip stitch. (19)
Use the long yarn tail to attach the hair to the head.
10
HAIR VERSION 2 HAIR WITH CURLS
Start with desired hair color. Start with desired hair color.
Rnd 1: 6 sc in a magic ring (6) Rnd 1: 6 sc in a magic ring (6)
Rnd 2: [inc] x 6 (12)
Rnd 3: [1 sc, inc] x 6 (18) From now on only work in back loops.
Rnd 4: [2 sc, inc] x 6 (24) Rnd 2: [inc] x 6 (12)
Rnd 5: [3 sc, inc] x 6 (30) Rnd 3: [1 sc, inc] x 6 (18)
Rnd 6: 2 sc, inc, [4 sc, inc] x 5, 2 sc (36) Rnd 4: [2 sc, inc] x 6 (24)
Rnd 7: [5 sc, inc] x 6 (42) Rnd 5: [3 sc, inc] x 6 (30)
Rnd 8-9: 42 sc – 2 rounds (42) Rnd 6: 2 sc, inc, [4 sc, inc] x 5, 2 sc (36)
Rnd 10: 3 sc, inc, [6 sc, inc] x 5, 3 sc (48) Rnd 7: [5 sc, inc] x 6 (42)
Rnd 11-17: 48 sc – 7 rounds (48) Rnd 8-9: 42 sc – 2 rounds (42)
Rnd 18: 2 hdc, 2 dc, 1 hdc, 1 sc, 1 hdc, 8 dc, Rnd 10: 3 sc, inc, [6 sc, inc] x 5, 3 sc (48)
2 hdc, 2 sc, 1 slst, skip rest of the stitches, leave Rnd 11-16: 48 sc – 6 rounds (48)
a long tail and cut the yarn, pull it through the slip Fasten off and leave a long tail to attach the hair to
stitch. (20) the head.
Use the long yarn tail to attach the hair to the head.
Now join the yarn into the last back loops of last
round. *Make 5 ch, start on second chain from the
BIG HAIR BUN hook and make 4 sc. Then slst into next back loops.*
Repeat the instructions marked with * for 7 rounds,
Start with desired hair color. and then just do the curls on every second round to
Rnd 1: 6 sc in a magic ring (6) the last (round 2).
Rnd 2: [inc] x 6 (12) You can also reduce 1 ch and 1 sc, and do every
Rnd 3: [1 sc, inc] x 6 (18) second back loop.
Rnd 4: 1 sc, inc, [2 sc, inc] x 5, 1 sc (24)
Rnd 5: [3 sc, inc] x 6 (30)
Rnd 6-9: 30 sc – 4 rounds (30)
Rnd 10: [3 sc, dec] x 6 (24)
Fasten off and leave a long yarn tail to attach the
1. Join the yarn in the first back loop 2. Starting from second chain, make
bun to the hair. and make 5 chains. 4 sc.
11
HIJAB Fasten off and leave a long tail, cut the yarn. Thread
the yarn tail through the bottom of the hijab and pull
The hijab is worked in rows. Turn the piece after to tighten up, so it is same size as the neck.
each row. Chains are not counted in the total.
Put the hijab on the head and swipe the scarf around
the neck. Use the rest of the yarn tail to attach the
hijab and scarf.
12
BLANKET KNITTED PIECE
The blanket is worked in rows. Turn the piece after Knit a piece that is approx. 30 x 30 cm. I used
each row. Chains are not counted in the total. 8 casts on mine. Stop halfway on a row and insert
short pieces of wire as knitting needles.
Start with desired blanket color. Leave a very long tail (my version is 5 arm-lengths
Make 12 ch. long) and cut the yarn. Start to wrap the yarn around
Row 1: Start on the third chain from the hook; one of your fingers. After some wraps, take it of the
10 hdc, 2 ch (10) finger and continue wrap the yarn around it. When
Row 2-5: Skip the 2 chains and start on next stitch; there is just approx. 10 cm away from the scarf, add
10 hdc, 2 ch – 4 rows (10) little clue under the last wrap and let it dry.
Row 6: Skip the 2 chains and start on next stitch;
2 hdc, skip rest of the stitches (2)
Leave the loop as it is (you will insert the dolls crochet
hook into this loop) and then place a stitch marker in
the loop, so you will not loose it.
Leave a very long tail (my version is 5 arm-lengths
long) and cut the yarn. Start to wrap the yarn around
one of your fingers. After some wraps, take it of the
finger and continue wrap the yarn around it. When 1. Start by wrapping the yarn 2. Take it out from the finger and
there is just approx. 10 cm away from the blanket, around the finger (starting with the continue wrapping the yarn around.
end tail) Squeeze it as a ball while wrapping
add little clue under the last wrap and let it dry.
Decorate the blanket as desired. I embroidered red
V's to make it look like hearts.
3. Change side of the ball all the 4. Wrap to you have approx.
time while wrapping, so it becomes 10-15 cm from the blanket/piece.
round.
5. Add tiny clue under the last wrap. 6. Hold the yarn tail to it dries little
bit.
13
time to
put me
together
14
ASSEMBLY Now it is time to attach the legs.
You can either choose to have the legs pointing down
Attach the hair on the head. If you want to give more or crossed. Pin the legs against the body and try out
forehead to the doll, push the hair more down on the on a surface if the doll sits well.
neck.
15
wo w !
Your yarn-loving friends are done!
Please share your AMAZING
work, but don’t forget to
tag me on Instagram:
@handmade_by_halime
You did a
In other channels use hashtag:
#handmadebyhalime