Multiple Choice (ENCIRCLE THE LETTER OF THE CORRECT ANSWER) ___ 1) It contains all the information required to identify the part or assembly. a) Cage code b) Company info c) Title Block d) Tolerance ___ 2) It is used to identify the drawing number and sheet number and optional revision. a) MDMB b) MEMB c) Material desc d) Title Block. ___ 3) A system of numbers and letters along the left and right margins. a) Application block b) Drawing number c) MDMB d) Zone ___ 4) The part of the surface or area that forms its outer boundary. a) Border b) Description c) Section d) Revision ___ 5) The rough trimmed edge of a paper. a) Angle Projection b) Border c) Paper edge d) Scale block ___ 6) It displays the name address and contact information of the company. a) Angle Projection b) Company info c) Local notes d) Title Block ___ 7) It is a five number code assigned by the United States Defense Logistic Service (DLSC) for government and Commercial use. a) Description b) Café Code c) Cage code d) General notes ___ 8) This number provide key to categories such as the nature of the drawing, casting, machining or assembly. a) Application block b) Drawing number c) Drawing part d) Parts list ___ 9) It enters the letter and number and is used as a reference in a drawing so users can identify that a change has been made. a) Material desc. b) Revision c) Revision block d) Zone ___ 10) It specifies the principal drawing scale, such as FULL or 1:1, HALF or 1;2. a) Paper edge b) Scale annotate c) Scale block d) Tolerance ___ 11) An allowable amount of variation of a specified quantity, especially in the dimensions of a machine or part. a) Company info b) Local notes c) Paper edge d) Tolerance ___ 12) It is to be able to specify a substance for easy location on storage. a) Cage code b) General notes c) Material desc. d) Zone ___ 13) It includes information such as next assembly and where it is used for drawing of a detailed part or assembly of a component of a larger assembly. a) Application block b) Border c) Drawing number d) Parts list ___ 14) It gives a short interpretation of the change. a) Cage code b) Description c) Drawing number d) Revision block ___ 15) It is a method of orthographic projection which is a technique in portraying a 3d design using a series of 2d views. a) Angle Projection b) Scale block c) Surface texture d) Title Block ___ 16) These are documents that only relate to a specific parts or feature. a) Company info b) Local notes c) Paper edge d) Tolerance ___ 17) These are documents that provide information to supplement specification relevant to the whole drawing. a) Cage code b) Finite number c) General notes d) Material desc. ___ 18) A bill of material or product structure or a list of raw material needed to manufacture an end product. a) Application block b) Border c) Drawing number d) Parts list ___ 19) It specifies the current revision of the part or drawing. a) Description b) Revision c) Revision block d) Zone ___ 20) This is the specified quality of the finished product. a) Angle Projection b) Scale block c) Site Block d) Surface texture