Professional Documents
Culture Documents
61211302-80 Large Junction Box R12
61211302-80 Large Junction Box R12
61211302-80 Large Junction Box R12
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Customer : -
C
Project Description : -
Subject : 61211302-80_Large Junction box
Project No.: : -
D
Norm / Standards : IEC/UL Type Of Enclosure : Stainless Steel Junction Box -304
Compliance : IEC/UL Fabrication Year : -
Rated Voltage / Frequency : - Degree Of Protection : IP65
Rated Current : - Temperature Range : -10 to 70 °C
E Protection Device : - Panel Thickness : 1.5 x 1.5 mm
Earth System : - Panel Dimension H x W x D : 300mm x 450mm x 160mm
Rated Control Voltage : 24Vdc Incoming Cables : Bottom
Rated Short-Circuit Max. : - Outgoing Cables : Bottom
Rated Short-Circuit Min. : - Other Comments : -
F
2
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box Title page/Cover Sheet =
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 02-02-2018 Alfa Laval Copenhagen A/S -CAT +
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 1
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
=A1+CP-P26&SCH/80 SAFETY INPUTS BOWL SPEED,COVER SWITCH & GREASE LEVEL 03-07-2015 inpagat
=A1+CP-P26&SCH/82 ANALOG & DIGITAL INPUTS VIBRATION & SPEED X20CM2821 03-07-2015 inpagat
1 10
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box Table Of Contents =
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 02-01-2018 Alfa Laval Copenhagen A/S -CAT +
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 2
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Revision overview
A
Revision name Revision comment Reason for revision change Page name Revision description Creator Date
R12 Change part numbers missed on ver 11 &GR/10 Chnage Temp range, SS panel supl. DKSOCCL 02-02-2018
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R11 Change part numbers They were missed on revision 11 =A1+CP-P26&PR/700 Change title page, SS panel supplier DKSOCCL 02-02-2018
R11 Change part numbers &GR/2 Heavicon Connector Part Number changed DKSOCCL 02-01-2018
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
R10 Heavicon Connector Part Number changed =A1+CP-P26&PR/700 Heavicon Connector Part Number changed DKSOCCL 13-12-2017
B
R10 Heavicon Connector Part Number changed =A1+CP-P26&PR/700 Heavicon Connector Part Number changed DKSOCCL 12-12-2017
R10 Heavicon Connector Part Number changed =A1+CP-P26&SCH/12 Heavicon Connector Part Number changed DKSOCCL 12-12-2017
R10 Heavicon Connector Part Number changed =A1+CP-P26&SCH/10 Heavicon Connector Part Number changed DKSOCCL 12-12-2017
R10 Heavicon Connector Part Number changed &GR/10.a Replaced 1604854 to 1412753 & 1771927 to 1411331 inpaspla 04-09-2017
R10 Heavicon Connector Part Number changed =A1+CP-P26&SCH/7 Replaced 1604854 to 1412753 & 1771927 to 1411331 inpaspla 04-09-2017
R10 Heavicon Connector Part Number changed =A1+CP-P26&SCH/8 Replaced 1604854 to 1412753 & 1771927 to 1411331 inpaspla 04-09-2017
R10 Heavicon Connector Part Number changed =A1+CP-P26&SCH/12 Replaced 1604854 to 1412753 & 1771927 to 1411331 inpaspla 04-09-2017
D
R10 Heavicon Connector Part Number changed &GR/10 Replaced 1604854 to 1412753 & 1771927 to 1411331 inpaspla 04-09-2017
R10 Heavicon Connector Part Number changed =A1+CP-P26&PR/200 Replaced 1604854 to 1412753 & 1771927 to 1411331 inpaspla 04-09-2017
R10 Heavicon Connector Part Number changed =A1+CP-P26&PR/700 Replaced 1604854 to 1412753 & 1771927 to 1411331 inpaspla 04-09-2017
R10 Heavicon Connector Part Number changed &GR/10.a New page created inpaspla 18-04-2016
R08 Due to updations in the schematic diagram &GR/10 Updated the Revision Overview Report inpagat 03-07-2015
R08 Due to updations in the schematic diagram &GR/10 Updated the Revision Overview Report inpagat 03-07-2015
R08 Due to updations in the schematic diagram &GR/2 Updated the Table Of content Report inpagat 03-07-2015
R08 Due to name change from MD to Inlet(MD) =A1+CP-P26&SCH/82 Updated the MD to Inlet(MD) inpagat 03-07-2015
F
R08 Due to name change from MD bearing to Inlet(MD) =A1+CP-P26&SCH/81 Updated the MD bearing to Inlet(MD) inpagat 03-07-2015
R08 Due to name change from MD bearing to Inlet(MD) =A1+CP-P26&SCH/82 Updated the MD bearing to Inlet(MD) inpagat 03-07-2015
Updated the Interconnection diagram with MD bearing to
R08 Due to name change from MD bearing to Inlet(MD) =A1+CP-P26&SCH/9 inpagat 03-07-2015
Inlet(MD)
R08 Naming change from Standard to Plus =A1+CP-P26&SCH/7 Change the +P35 name from Standard to Plus inpagat 03-07-2015
Change the name from Standard to Plus & to Updated the Overview diagram as per Plus Sensor Connection
R08 =A1+CP-P26&SCH/8 inpagat 03-07-2015
match with Sensor Connecting diag diag
G
2 10.a
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box Revision Overview =
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 02-02-2018 Alfa Laval Copenhagen A/S -CAT +
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 10
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Revision overview
A
Revision name Revision comment Reason for revision change Page name Revision description Creator Date
R08 Naming change from Standard to Plus =A1+CP-P26&SCH/7 Change the +P35 name from Standard to Plus inpagat 03-07-2015
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R06 As per Design requirement =A1+CP-P26&SCH/10 Added M12 sealing caps for -10X7 to -10X10 connectors inpagat 03-02-2015
D
R06 As per 2TNG requirement =A1+CP-P26&SCH/83 Updated the sensor pin no and added note inpagat 03-02-2015
R06 As per 2TNG requirement =A1+CP-P26&SCH/80 Updated the sensor wiring as per the datasheet inpagat 03-02-2015
R06 As per 2TNG updated the overview =A1+CP-P26&SCH/8 Updated the overview inpagat 03-02-2015
10 12
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box Revision Overview =
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 02-02-2018 Alfa Laval Copenhagen A/S -CAT +
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 10.a
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
10.a =A1+CP-P26&SCH/1
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box STRUCTURE IDENTIFIER OVERVIEW =
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 22-01-2015 Alfa Laval Copenhagen A/S -CAT +
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 12
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Green GN
C
E Silver SR
White WH + 24 VDC
F
Yellow YE
* Colour identification using combination of those colours listed above may be used *
* For safety reasons, the colour Green or the colour Yellow may not be used except in the bicolour combination Green and Yellow *
G * In General The Number Of Terminal Connection Is Used For Marking *
=+&GR/12 6
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box WIRE COLOUR/WIRE CODE = A1
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 19-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P26
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 1
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
Component Labelling Component Type
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
A1 13 11
-19K4
Example: -19K4 -19K4
12
A2 14
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
K CONTACTOR
RLY RELAY
M M MOTORS
R R RESISTANCE,RHEOSTAT,...
Dim: 17x5mm
Color: White background, characters black
-20Q0 U U TRANSDUCER : ELECTRICAL / ELECTRICAL QUANTITY
FREQUENCY CONTROLLER,SOFTSTARTER,TRANSDUCER,..
Texts according to diagram
Dim: 17x5mm stickers which are stick on components X X TERMINAL BLOCKS,CONNECTORS,SOCKET,...
1 7
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box COMPONENT MARKING & = A1
Drawing No.:
R12 DKSOCCL 02-01-2018 DKSOJPNA DKSOEPV Made by inpagat 19-11-2014 Alfa Laval Copenhagen A/S -CAT ABBREVIATIONS + CP-P26
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 6
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
+P0 = Distribution Panel +P11 = Main - and Back Drive Panel +P26 = Small/Large Junction Box
+P1 = Control Panel +P12 = Disp. +P27 = Disp.
+P1.1 = VFD Panel +P13 = Disp. +P28 = Disp.
C
+P1.2 = Application Panel +P14 = Disp. +P29 = Disp.
+P1.3 = Disp. +P15 = Disp. +P30 = Disp.
+P1.4 = Other external Control Panel +P16 = Disp. +P31 = UL - (BD og MD)
+P2 = Decanter +P17 = Disp. +P32 = Disp.
D
6 8
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box POSITIONS = A1
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 19-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P26
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 7
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
OPTION
ETHERNET LINK TO
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
HMI
PANEL
RESET
LIVE
EM.STOP
(L1,L2,L3,PE)
FROM CUSTOMER
POWER SUPPLY
7 9
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box GENERAL OVERVIEW = A1
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 19-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P26
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 8
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
6 7
1 2 3 4 5 7 8
10
E 9
8 10
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box DECANTER OVERVIEW = A1
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 19-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P26
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 9
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R10
R12
R12
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
inpaspla
DKSOCCL
DKSOCCL
Made by
0
18-04-2016
02-01-2018
02-02-2018
DKSOJPNA
DKSOJPNA
DKSOJPNA
Approved by/Date
160 mm
Project
Made by
45 mm 35 mm
-10A2
Left
Name
inpagat
2
50 mm
Date
19-11-2014
-10X1
-10X2
-10X3
-10X4
-10X5
-10X6
3
-10X8
-10X7
30 mm 30 mm 30 mm 30 mm
-10X9
-10X10
Front
Front
4
Bottom
140 mm
5
Multiplug -12X100
All Chassis Connector (X1/X2/X3/etc.) Are Laser Printed Onto The Bottom
45 mm
300 mm
6
4 pc M5 X 25 mm Welded On
40 mm 220 mm 40 mm
61211302
Drawing No.:
8
Top
Front
Page
= A1
Pages of
+ CP-P26
9
21
10
11
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R10
R12
R12
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
10
inpaspla
DKSOCCL
DKSOCCL
Made by
0
18-04-2016
02-01-2018
02-02-2018
DKSOJPNA
DKSOJPNA
DKSOJPNA
DKSOEPV
DKSOEPV
DKSOEPV
1
Approved by/Date
Project
Made by
Perforation Ø=6 mm X 4
Name
inpagat
-11U1
2
Date
19-11-2014
3
Cable Duct
400 mm
280 mm
4
-11A2
5
Cable Duct
61211302
Drawing No.:
Front
8
Page
= A1
Pages of
+ CP-P26
9
21
11
12
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
A
Junction Box with details
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
-12X100 -12X101
13 1 1 13
C
14 2 2 14
15 3 3 15
-12MP1
Mounting Plate 16 4 4 16
17 5 5 17
18 6 6 18
19 7 7 19
D 30 mm 390 mm 30 mm
20 8 8 20
21 9 9 21
45 mm
22 10 10 22
R R 23 11 11 23
24 12 12 24
S S
R= M8 x 30 mm welded On
210 mm
S= Washer Ø 30 mm x 2 mm Fixed On The Rear Side (see Page 14) Arrange Individual
shielding For Each Sensor Circuit
F
R R
45 mm
S S
11 13
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box JUNCTION BOX LAYOUT = A1
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 19-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P26
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 12
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R10
R12
R12
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
12
inpaspla
DKSOCCL
DKSOCCL
Made by
0
18-04-2016
02-01-2018
02-02-2018
DKSOJPNA
DKSOJPNA
DKSOJPNA
Approved by/Date
Project
Made by
Name
inpagat
2
#1
Date
19-11-2014
Junction Box with Details of 1pcs. Mounting Plate
3
# 2 : 4 x ( M5 x 25 mm Welded on with 1pcs. Plastic Distance Piece 12mm high & 1pcs. Lock Nut )
Junction Box
#2
61211302
Drawing No.:
8
Page
= A1
Pages of
+ CP-P26
9
21
13
14
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
-14MP1 -14K3
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
-12X100:PE
13 80
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box ACCECCORIES = A1
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 20-11-2014 Alfa Laval Copenhagen A/S -CAT + CP-P26
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 14
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R10
R12
R12
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
14
inpaspla
DKSOCCL
DKSOCCL
Made by
+P2
=A1
0
18-04-2016
02-01-2018
02-02-2018
DKSOJPNA
DKSOJPNA
DKSOJPNA
-S1
/10.2
-10X1
-X100
1
*
1
BN
-12X100:2 0.34 mm2
2
2
DKSOEPV
DKSOEPV
DKSOEPV
1
Approved by/Date
3
21
WH BU
0.34 mm2
4
BK
Project
3
0.34 mm2
Made by
SENSOR (OVERSPEED)
BOWL SPEED
5
GY
Name
inpagat
-10X1.21 / 80.8
2
Date
20-11-2014
3
-S8
/10.3
-10X8
-X100
-12X100:17 0.34 mm2
S22
17
BN
4
*
2+
0.34 mm2
S21
2
WH
0.34 mm2
3
BU
3
3+
18
S12
BK
0.34 mm2
COVER SWITCH SENSOR
5
GY
4
4+
S11
5
OPTION:
COVER SWITCH
82.7 /
-S9
-10X10.19
All -X100 terminals no. are terminals no. in Male Connector -12X100 (See page 12)
-X100
1
1
19
BN
20
GREASE LEVEL
WH
80.1 / -10X1.21
3
BU
61211302
0.34 mm2
Drawing No.:
4
22
BK
8
5
GY
-10X1.21 / 82.5
Page
= A1
Pages of
+ CP-P26
9
21
80
81
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R10
R12
R12
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
80
inpaspla
DKSOCCL
DKSOCCL
Made by
+P2
=A1
0
18-04-2016
02-01-2018
02-02-2018
-S3
DKSOJPNA
DKSOJPNA
DKSOJPNA
/10.2
-10X3
*
0.34 mm2
U
1
BN
2
-X100
-12X100:5 0.34 mm2
DKSOEPV
DKSOEPV
DKSOEPV
1
5
2
3
WH
Approved by/Date
0.34 mm2
3
4
GB END BEARING
BU
-12X100:6 0.34 mm2
6
4
Project
Made by
BK
TEMPERATURE SENSOR
0.34 mm2
5
GY
Name
inpagat
2
Date
20-11-2014
-S4
3
/10.2
-10X4
U
0.34 mm2
2
1
BN
7
3
2
WH
3
BU
8
4
BK
TEMPERATURE SENSOR
INLET(MD) END BEARING
0.34 mm2
4
5
GY
5
TEMPERATURE
All -X100 terminals no. are terminals no. in Male Connector -12X100 (See page 12)
61211302
Drawing No.:
8
Page
= A1
Pages of
+ CP-P26
9
21
81
82
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R10
R12
R12
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
81
inpaspla
DKSOCCL
DKSOCCL
Made by
+P2
=A1
0
18-04-2016
02-01-2018
02-02-2018
DKSOJPNA
DKSOJPNA
DKSOJPNA
-S5
1
BN
A+
-X100
-12X100:9 0.34 mm2
DKSOEPV
DKSOEPV
DKSOEPV
1
9
2
2
Approved by/Date
0.34 mm2
3
WH BU
-12X100:10 0.34 mm2
-
4
4
Project
10
Made by
0.34 mm2
5
BK GY
GB END VIBRATION SENSOR
Name
inpagat
2
Date
20-11-2014
-S6
/10.3
-10X6
0.34 mm2
*
1
BN
3
A+
-X100
-12X100:11 0.34 mm2
2
2
11
0.34 mm2
3
WH BU
4
4
-S2
/10.2
-10X2
-X100
1
-12X100:3
*
5
0.34 mm2
3
1
BN
4
2
0.34 mm2
80.8 / -10X1.21
3
WH BU
0.34 mm2
PINION SPEED SENSOR
5
GY
* Part of Machine Delivery - See Machine Spare Part list
6
-10X1.21 / 82.7
X20CM2821
VIBRATION & SPEED
-S10
/10.3
-10X10
All -X100 terminals no. are terminals no. in Male Connector -12X100 (See page 12)
0.34 mm2
80.7 / -10X10.19
1
1
RD
23
GN
0.34 mm2
82.6 / -10X1.21
3
3
WH
24
BK
VIBRATION SENSOR
0.34 mm2
5
61211302
Drawing No.:
8
-X100
PE
Page
= A1
Pages of
+ CP-P26
9
21
82
83
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
R10
R12
R12
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
Revision No.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
F
E
B
C
A
G
D
82
inpaspla
DKSOCCL
DKSOCCL
Made by
+P2
=A1
0
18-04-2016
02-01-2018
02-02-2018
DKSOJPNA
DKSOJPNA
DKSOJPNA
-S7
-X100
-12X100:13 0.34 mm2
1
1
13
RD
-12X100:14 0.34 mm2
DKSOEPV
DKSOEPV
DKSOEPV
1
2
2
14
GN
Approved by/Date
-12X100:15 0.34 mm2
15
-12X100:16 0.34 mm2
Project
3
16
Made by
WH BK
0.34 mm2
5
4
LOAD CELL (BD TORQUE)
OG
Name
inpagat
2
Date
20-11-2014
3
LOAD CELL
ANALOG INPUT
All -X100 terminals no. are terminals no. in Male Connector -12X100 (See page 12)
7
61211302
Note :
Drawing No.:
8
3 = 0-
4 = E-
2 = 0+
1=E+
Page
= A1
Pages of
+ CP-P26
9
21
83
&PR/200
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Cable name
Cable name
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
=A1+CP-P26-X100
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
Alfa Laval will enforce its rights related to this document to the fullest extent of the law, including the seeking of criminal prosecution.
Connection
Connection
Cable type
Cable type
B
Terminal
Jumper
point
point
Function text Target designation Target designation Page / column
-10X1 1 1 &SCH/80.1
-10X1 5
C 3 -10X2 1 &SCH/82.5
2 5 &SCH/81.1
4 6 &SCH/81.1
-10X4 2 7 &SCH/81.3
-10X4 4 8 &SCH/81.4
10 -10X5 4 &SCH/82.1
D 11 -10X6 2 &SCH/82.3
-10X6 1
12 -10X6 4 &SCH/82.4
-10X7 1 13 &SCH/83.1
-10X7 2 14 &SCH/83.1
-10X7 3 15 &SCH/83.1
-10X7 4 16 &SCH/83.1
-10X8 1 17 &SCH/80.4
E -10X8 4 18 &SCH/80.5
-10X9 2 20 &SCH/80.7
21 -10X1 3 &SCH/80.1
-10X2 3
-10X10 3
-10X9 3
-10X9 4 22 &SCH/80.8
F 23 -10X10 2 &SCH/82.7
24 -10X10 4 &SCH/82.8
PE &SCH/82.9
&SCH/83 700
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box Terminal Diagram = A1
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 04-09-2017 Alfa Laval Copenhagen A/S -CAT + CP-P26
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 200
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21
0 1 2 3 4 5 6 7 8 9
Without limiting any rights related to this document, no part of this document may be copied, reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
Parts list
A
Device tag Quantity Designation Type number Supplier Part number
or for any purpose, without the expressed permission of Alfa Laval. Nor may it be used in any other way or for any other purpose than expressly permitted by Alfa Laval.
This document and its contents is owned by Alfa Laval AB (publ.) or its affiliates and protected by laws governing intellectual property and thereto related rights.
-11U1 1 Grey Cable Duct ---- PANEL BUILDER PANEL BUILDER. ----
B -10X1 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X2 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X3 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X4 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X5 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X6 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X7 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON B-coded SACC-DSI-FSB-5CON-PG9/ 0,5 SCO PHOENIX CONTACT PHO.1543676
-10X7 1 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable PROT-M12 FS PHOENIX CONTACT PHO.1560251
-10X8 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X8 1 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable PROT-M12 FS PHOENIX CONTACT PHO.1560251
C -10X9 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X9 1 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable PROT-M12 FS PHOENIX CONTACT PHO.1560251
-10X10 1 Sensor/actuator flush-type socket, 5-pos.M12 SPEEDCON A-coded SACC-DSI-FS-5CON-PG 9/0,5 SCO PHOENIX CONTACT PHO.1542729
-10X10 1 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable PROT-M12 FS PHOENIX CONTACT PHO.1560251
-12X100 1 HEAVYCON Male Housing HC-B 24-l-PT-M 1407736 PHOENIX CONTACT PHO.1407736
-12X100 1 HEAVYCON B24 panel mounting base HC-STA-B24-BWD-ELC-AL 1411331 PHOENIX CONTACT PHO.1411331
-12X101 1 HEAVYCON Female Housing HC-B 24-l-PT-F 1407735 PHOENIX CONTACT PHO.1407735
-12X101 1 HEAVYCON Sleeve Housing HC-STA-B24-HHFD-1STP29-EL-AL 1412753 PHOENIX CONTACT PHO.1412753
-12X101 1 Cable Gland PG29 50.029 M/L JACOB JACO.50.029 M/L
200
R12 DKSOCCL 02-02-2018 DKSOJPNA DKSOEPV 61211302-80_Large Junction box Parts List = A1
R12 DKSOCCL 02-01-2018
Drawing No.:
DKSOJPNA DKSOEPV Made by inpagat 02-02-2018 Alfa Laval Copenhagen A/S -CAT + CP-P26
R10 inpaspla 18-04-2016 DKSOJPNA DKSOEPV Maskinvej 5 - DK-2860 Søborg - Denmark 61211302 Page 700
Revision No. Made by Modification Date Checked by/Date Approved by/Date Project Name Date Pages of 21