Professional Documents
Culture Documents
Get CFAttachment
Get CFAttachment
1
Installation Guide
• Step 1 – Insert installation CD
If you DO NOT have .NET Framework v1.1 installed, you will need to install it by
opening the CD and running dotnetfx.exe. Alternately, you can right-click the CD and
select “Install .NET Framework v1.1”. You must have local Administrator rights on your
computer to install the .NET Framework.
If you DO have .NET Framework v1.1 installed, the following screen should pop up:
NOTE: If this window does not appear after a couple minutes, you will need to manually
run “autorun.exe” from the CD.
This will install the USB drivers necessary to use the QuiQ USB Interface Module. You
must have administrator privileges on your computer to proceed.
There will be another window that prompts you for the same thing, as there are actually
two USB device drivers required: a USB composite device driver, and a virtual serial
port driver. Click “Continue Anyway” and proceed.
When it is finished you may close the window. You are ready to proceed to the QuiQ
Programmer v1.1 User Manual.
Enjoy!
Copyright © 2005
All rights reserved
Delta-Q Technologies Corp.