Professional Documents
Culture Documents
Lifting Plan (Non-Critical and Regular Lift)
Lifting Plan (Non-Critical and Regular Lift)
2. Pre-Lift Checklist
indicate OK and Checked. indicates furthur controls are reuired. Please use "N/A" for hazard that is not applicable.
On-site Hazards explained ⃝________ Traffic managed ⃝________
Crane Hazards explained ⃝________ First aid, muster point location known ⃝________
JSA completion including lift plan discussion ⃝________ Radio’s Checked ⃝________
Hazard notification required ⃝________ RCI configured and working ⃝________
Crane daily check ⃝________ Electrical hazards identified ⃝________
CraneSafe current ⃝________ Spotters appropriately positioned ⃝________
Crane Operator licenced ⃝________ Crane is earthed ⃝________
Rigger licenced ⃝________ Ground conditions checked ⃝________
Fatigue management ⃝________ Underground services are clear ⃝________
Vision condition checked ⃝________ Obstruction checked ⃝________
Weather conditions checked ⃝________ Rigging methodology discussed ⃝________
PPE correct ⃝________ Load support checked ⃝________
Lifting equip certs correct ⃝________ The lift will use a tag line ⃝________
Rating charts correct ⃝________ Loose objects removed from load ⃝________
Counterweight correct ⃝________ No simultaneous operations ⃝________
Reeving correct ⃝________ Man-cage checked ⃝________
Outriggers Ext/ Pinned ⃝________ Confined Space checked ⃝________
Crane set-up as per lift plan ⃝________ Aiport's notified ⃝________
3. Lift Details
Lift #______ Lift #______ Lift #______ Lift #______
Weight of load kg kg kg kg
Weight of rigging kg kg kg kg
Weight of hooks kg kg kg kg
Additional weight kg kg kg kg
Total* 0 kg 0 kg 0 kg 0 kg
Boom Length m m m m
Boom Sequence
Line pull T T T T
Parts of Line No. No. No. No.
Hook block WLL T T T T
Pick up radius m m m m
Set-down radius m m m m
Max radius m m m m
SWL at max radius kg kg kg kg
Communication method* ⃝ ⃝ ⃝ ⃝ ⃝ ⃝ ⃝ ⃝ ⃝ ⃝ ⃝ ⃝
Rigger initial*
* Operator to calculate, rigger must initial below when checked
4. Lift Sketch
Sketch the load and show the following:
1. Crane standing position
2. Outrigger location
3. Load location
4. Show distances and load movement-direction
5. Sign off
Position Name Signature Date
Engineer's Representative
Sign to show you have read and understood the lift plan and all hazard checks