Professional Documents
Culture Documents
Series 1000 Conveyors 4578
Series 1000 Conveyors 4578
Series 1000 Conveyors 4578
conveyors
the most popular configuration since itenables one point for material and requires no feeder, sprockets
single piece of equipment to do the work of feeding, or bearings at the lower end. The Loop Boot design
conveying and elevating. moves material gently from choke feed to discharge
point. When handling aeratable materials, special flat
Copyright © 2022 Metso Outotec. Leaflet no: 4578-01-22-EN-CNS. All trademarks and registered trademarks are the property of their respective owners.
Z Type loop boot sections with seal bars are required.
This is used where space considerations do not allow
the use of a combination of L-type and horizontal Double Leg Loop Boot
conveyors. Necessary seals in the drum corner limit This design features a head section which discharges
the use of this type to specific materials or situations material from the open side of the flightbefore the
where seals can be monitored. flight reaches the sprocket. Therefore, material is both
fed into and dischargedfrom the open side of the
Vertical Closed Circuit flight. This style should be used for handling bulky,
This style conveys and elevates in a vertical plane. fibrous or lumpy material.
They may be used to distribute to and reclaim from
a series of in-line bins with a minimum of handling, Read more at
breakage, dust and power. mogroup.com/en-masse-conveyors/
Conveying elements:
One-piece cast links with integral flights.Malleable iron standard. Optional materials
include alloy steel, stainless steel, and manganese bronze.