Professional Documents
Culture Documents
Johndeere s690
Johndeere s690
Johndeere s690
2 3
600R Series Platform
Maximise harvest potential with lower, faster cutting
Put one of the John Deere 600R
Series Platforms on your combine
MODEL WIDTH
and you’ll get lower, faster cutting
625R 7.60 m (25 ft)
that you can easily adjust to suit your
A 100 hp electro-hydraulically controlled mechanical reverser uses 630R 9.14 m (30 ft)
conditions. Available in widths to A positive, epicyclical gear case direct engine power to put more torque into the job so you can maintain a All 600R Series platforms can easily be
9,14 metres, the 600R platforms knife drive provides in-line knife brisk harvest pace – even in difficult cutting conditions. With the automatic Stainless steel feed plates in front of switched between any W, C, T and S-Series
feature heavy duty components like a motion for vibration-free operation. reel reverser, you won’t even need to raise the reel to reverse the cutting the auger will never rust. Crop is fed combine.
The counterbalanced drive provides platform. smoothly to the intake auger, year after
100 hp reverser that takes power smoother cutting, less shatter loss. year, season after season.
directly from the engine, along with Non-clog knife guards fully enclose
an automatic reel reverse so you the knives for cleaner cutting.
don’t have to raise the reel. Semi-automatic trailer hitch option Single-lever latching gives you the Higher knife speed and longer knife
makes attaching the header trailer a ultimate in header hook-up stroke enhance cutting capacity.
Stainless steel feed plates help keep one-person operation. convenience. One lever connects the Knife sections are self-cleaning and
electro-hydraulic multicoupler and bolted for easy replacement in the
crop sliding smoothly into the four- field.
way adjustable auger, while the coun- engages the platform attachment
pins. Fast, easy and clean. Composite side shields
terbalanced knife drive provides near- eliminate chips and dents as well
ly vibration-free cutting with less as rust. Release just one latch for
shatter loss. And to help you start full access to the drives.
quickly every day, all 600R platforms
feature single-point attachment of
electrical and hydraulic lines, locking Adjustable table length. Set the three position cutting table from 545 to
715 mm to maximise performance in all conditions… from short, dry straw
the platform in place. to long, wet crop.
4 5
S690: Feederhouse
High capacity feeding system for high yielding crops
To handle the exceptional capacity of
the 600R Series platforms and the
S-Series separating system, we gave Excellent visibility.
the S690 combine a high capacity The S690 design positions the feederhouse
lower and further forward than the majority
feeding system designed for perform- other combines on the market, for an
ance, reliability and ease of adjust- outstanding view of the standing crop
ment. Components like the heavy and stubble.
duty slip clutch give you exceptional
capacity, even in the highest yielding
crops. The 100 hp reverser gets
power directly from the engine, so you
can easily reverse out of tough block-
ages.
For farmers or contractors who har-
vest significant corn acreage, the
S690 can now be equipped with our The feederhouse width perfectly matches the width of the threshing Reverse out blockages from the cab. The heavy duty reverser efficiently Enhanced feederhouse slip clutch design delivers higher capacity
area, promoting smooth, uniform material flow and reducing the chance dislodges the worst platform and feederhouse blockages. feeding in the heaviest yielding crops and the most demanding conditions.
new CommandTouch multi-speed of slug feeding. Provides 20% more torque to deliver consistent feeding for non-stop
feederhouse drive system. This inno- harvesting performance.
vative header drive allows on-the-go
shifting and offers 42% more torque
and 33% more lifting capacity…
plenty for a 12-row cornhead with
stalk chopper.
6 7
S690: Threshing
The perfect balance of capacity and quality
With John Deere S-Series separation,
you don’t have to sacrifice quality for
capacity; the high performance rotor
of the single tine separation system
gives you both. How?
Capacity begins at the feeding sys-
tem. The S-Series feederhouse and
transition area sends crop to the
separator module in three distinct
streams, balancing the rotor’s work-
load across three different areas and S-Series Tri-Stream Crop Flow Conventional Rotary Designs
helping reduce roping and slugging,
as well as lessening power require- How does the S-Series technology compare to other rotary
concepts? Unlike conventional designs that feature a concentric
ments. cage throughout the full length of the rotor, the John Deere S-Series
module features a step design with three distinct cage diameters.
The high performance rotor design
The outer cage gets bigger, allowing the crop mat to expand as it
with tapered ‘nose’ section increases travels through the module. This reduces the chance of roping and
capacity even further and gives you lowers the power requirements. This John Deere Tine Separation
longer, more baleable straw. Feed technology provides a pull-and-release action that frees trapped
grain in the crop mat.
flights at the front of the separator John Deere POSI-TORQ drive automatically tensions
send the crop mat toward the rear, the rotor drive belt to match loads. This improves torque,
giving you smooth material flow, even reduces maintenance and increases belt life.
at higher loads.
Choice of three concaves The S690 features our innovative High Performance Rotor
for improved performance in a variety of crops. This rotor design
can reduce rotor power requirements by up to 20%, increase
separator capacity up to 10% and give you longer straw that’s
easier to bale. You’ll also get better performance from the
cleaning system, as well as reduced cage and rotor wear.
8 9
S690: Separation
The High Performance Rotor: Quality without compromise
If you measure the value of a combine
by the range of conditions it can NEW
handle, then no combine offers a New Discharge Housing and Six rows of tines are angled
Discharge Beater quickly to aggressively comb and
higher value than the new S690 from sweeps crop material away from penetrate the crop mat,
John Deere. Equipped with the exclu- the rear of the STS module. freeing any remaining grain.
sive High Performance Rotor, the A longer discharge grate below You’ll put more grain in the
the beater boosts separation in tank, especially in green
S690 gives you higher capacity, along high yielding crops and makes conditions and crops with
with reduced power requirements, in sure even the last remaining heavy material loads.
nearly every crop. kernels get into the grain tank. Fingerbar separator grates are
Vanes on the discharge housing made of rugged, cast, nodular
The High Performance Rotor features spread material for a more iron. Removable sections give
a tapered front section to reduce rotor uniform flow to the chopper. you easy access to the tines
and the open finger design
load and engine power requirements virtually eliminates plugging.
and to improve the efficiency of the
entire threshing and separating sys-
tem. Because the amount of force
required to drive crop through the To give you a better picture of
your combine’s performance,
system is reduced, higher ground the S690 combine lets you
speeds are possible in a wide range of monitor performance of the
crops. Finally, single tine separation… separator and cleaning shoe
simultaneously to maximise
pioneered by John Deere… gives you
grain savings.
an ideal balance of capacity and grain
and straw quality.
10 11
S690: Cleaning
High capacity cleaning with easy in-cab adjustment
Threshing and separating capacity is
of no use without the cleaning capaci-
ty to match. So to give you exception- Four conveyor augers are located beneath the The non-adjustable raised centre front chaffer pre-cleans The single piece front and rear chaffer and the single piece DynaFlo II
concave, where the volume of separated material up to 40% of free grain before it reaches the rear chaffer. sieve are designed specifically for the S690 combine. Grain falls
ally clean grain samples, no matter is highest, to evenly move material into the Material from the separator drops down the incline of the from the front chaffer onto a solid step pan and then to the front cleaning system
what the yields or crop conditions, the cleaning system. Note the deep auger troughs; louvers, helping to thin the mat. This results in more aggressive part of the rear chaffer. A 20% longer sieve stroke shakes the
The DynaFlo II cleaning
John Deere S690 features our they provide uniform distribution of material to separation of material at the step pan. Air from the cleaning fan material more aggressively improving the cleaning shoe
system was designed specially
the cleaning system, with less bunching, even on seeks the higher elevation of the raised front chaffer and performance.
DynaFlo II cleaning system. for the S690 combine. Choose
side slopes. increased performance in cleaning is achieved.
an adjustable general purpose
The DynaFlo II system was developed chaffer and sieve (standard) for
specifically to match the capacity of most crops and conditions or an
the S690 combine. DynaFlo II clean- adjustable deep tooth chaffer
and sieve for corn harvest.
ing offers you high volume cleaning
action, with in-cab electronic adjust-
The new DynaFlo II cleaning fan blows a high
ment of sieve settings. Choose from volume of air across the full width of the cleaning
the general purpose chaffer or spe- shoe with an improved air distribution between
ciailty chaffers for maize and grass the front and rear part of the cleaning shoe.
About 30% of high velocity air flows to the front
seed. chaffer; 70% of high volume air is guided to the
rear chaffer and sieve. A steep pressure curve
delivers high pressure with less volume loss. The
result? Maximum efficiency and clean grain tank NEW
sample.
12 13
S690: Grain Handling
Grain handling capacity to handle high yields and tough schedules
Harvest with the S690 combine and
you won’t be limited by clean grain
handling capacity. That’s because we
Auger mounted camera and in-cab
increased the capacity of the clean monitor allows you to view unloading
grain elevator to give you better per- even in high sided trailers; a rear
formance from your cleaning shoe, mounted camera gives you a view of
material distribution from the straw
even in high yielding crops. The
chopper and the area ahead of the
11,000 litre grain tank and the high platform trailer hitch.
unloading rate boost you combine
productivity. *Option
14 15
S690: Residue Management
Chopping, baling or spreading: John Deere has the solution
Whether you drop it and bale it or
chop it and spread it, the John Deere
S690 can handle all your residue
management needs. You can select
between two chopper concepts.
For minimum and no tillage produc-
tion systems, the extra fine cut chop-
per spreads a fine layer of residue
across even the widest swaths. If you
With the Premium Chopper* concept you are able to
bale your straw, the Premium Chopper separate and spread the chaff when windrowing straw.
allows you to spread chaff to the sides Ideal for farmers who use the straw for baling and want
of your swath while dropping straw in an even spread of all cleaning shoe residue. Or direct
the chaff into the flow of chopped straw for perfect
perfectly formed windrows. Plus, distribution of the residue.
you’ll appreciate the high quality of
straw from the S-Series threshing and
separating system. You won’t get
straw of this length and uniformity
from any other rotary system.
16 17
The S690i-Series
S-Series: Intelligent Options Ag Management Solutions
i-Series combines for maximum performance Integrated Solutions
Boost your hroughput by up to 23%*. John Deere’s precision agriculture prod-
The new S690i-Series combines are ucts and services are designed to help
AutoTrac Assisted Steering gives you
available with intelligent, innovative HarvestSmart system precision guided, hands-free steering, you better manage information, machine
and integrated features: AutoTrac settings are displayed on perfect for new operators or harvesting utilisation and increase your overall prof-
Assisted Steering, HarvestSmart the cornerpost monitor. at night. All you do is steer around itability.
obstacles or through headland turns.
Automatic Federate Control and
All integrated solutions are based on the
HarvestDoc harvesting Field Data
common components: the StarFire iTC
Collection.
receiver and the GREENSTAR 2 display.
HarvestSmart continually adjusts the
The StarFire iTC receives satellite signals
combine’s ground speed until either
from the Global Positioning System (GPS)
the machine’s capacity limit or your
and from the John Deere StarFire cor-
loss limits are reached.
rection network to provide the exact
AutoTrac uses satellite signals to steer position in the field.
your combine with reduced overlaps to
The GREENSTAR 2 display comes with
ensure that you finish each pass or
pre-installed GREENSTAR Basis software
bed with a full platform, increasing the
to give you an unbeatable documentation
productivity of your combine.
and guidance solution. In addition it
HarvestDoc automatically collects all allows you to control ISOBUS ready
harvesting data such as yield and implements and to monitor machine per-
Adding a yield monitoring system to your combine is a cost effective way to determine The high precision, grain tank mounted
moisture content for later documenta- the variance of yields and moisture within your fields. HarvestDoc expands on yield moisture sensor has a faster fill and comfortable, more accurate operation. for use with your combine, sprayer, tractor formance, combining four functionalities
tion and analysis. mapping to record yield and crop harvest information onto a PC card. Take it to your cycle time for more accurate moisture With the GREENSTAR 2 system, you or SPFH. Applications include on-screen in one display.
office computer to generate yield maps, crop summaries and reports. Precisely the readings. So accurate that within
The combination of these features information you need to produce crops which are proven to meet quality assurance seconds of starting a new field you can choose the type of guidance you need – and as-applied mapping, headland Software Pro modules are available to
helps you boost your throughput by up scheme requirements. confirm crop moisture levels and decide either manual, with visual references or boundaries, map-based prescriptions and further enhance the capabilities of your
to 23%*. whether to continue harvesting or not. GREENSTAR 2 display. The accuracy of
fully automatic steering – and the level of more.
* Tests in collaboration with Weihenstephan University
accuracy, 2, 10 or 30 centimetres. the StarFire iTC receiver can be tailored
of Applied Science (2006) showed that the combina-
tion of AutoTrac and HarvestSmart in capacity mode
to your specific requirements. The com-
And because all current John Deere
delivers up to 23% more throughput (measured in t/h) mon components can be easily moved
over a manually steered and operated machine. combines are AutoTrac-ready, you don’t from one vehicle to another providing you
have to worry about fitting a third-party fully integrated, intelligent and innovative
The Intelligent Advantage system. agricultural management solutions.
• S690i-Series combines boost throughput
by up to 23%
• GUIDANCE. If you spend long hours in the • DOCUMENTATION. The new GREENSTAR
• AutoTrac hands free steering reduces cab, or if you must occasionally depend on 2 displays come pre-loaded with our
operator fatigue less skilled operators, a GREENSTAR 2 GREENSTAR Basics software, which
• HarvestSmart maintains high levels of guidance system can pay you back in more includes a variety of documentation tools
combine output
20 21
S690: Engine and drives
The most powerful John Deere combine to handle the most demanding jobs
All the threshing, separating and
cleaning capacity is of no use without
a solid engine to drive the entire pack-
age. That’s why every John Deere
S690 combine is driven by a depend-
able, proven, fuel efficient John Deere
PowerTech Plus engine connected to
high torque ground drives. And to
handle tough harvest conditions easily
the S690 is now equipped with even
more horsepower.
The new 13.5 litre John Deere
PowerTech engine delivers 530 hp
(ECE R120) at 2100 rpm for efficient
combustion, excellent fuel economy
and long engine life. That is real
power, available in the field when har- A 1155 L fuel tank and legendary John Deere fuel efficiency The simple drive system features fewer belts and chains, improving reliability. Notice how the tailings and clean grain elevator drives
vesting. Additional horsepower is ensure you’ll spend more productive time in the field harvesting, are located on the right hand side of the combine, improving access to the separator. Modular design of the cleaning fan, feed
available above rated power during less time refuelling. accelerator and chopper drives makes these secondary drives extremely easy to access.
grain tank unloading for continuous
harvesting performance. And with the
new auto prime feature fuel filter, 2100
service is even easier, just turn the
New Tier lll Engine 450
2000
ignition key and your fuel system will 1900
The high tech features of the John Deere
bleed automatically. 1800
13.5 l PowerTech Plus engine provide
Power (kW)
Torque (Nm)
1700
400
true agricultural characteristics: power 1600
that never gives up. A unit injector system, 1500
1400
electronic engine control and variable injec- 350
1300
tion timing and a variable geometry turbo-
1200
The John Deere Advantage charger deliver power when you need it 1100
22 23
Genuine John Deere Quality Hillmaster and HeaderTrak Systems
Building a better family of combines Hillmaster: Level land performance on 22% slopes
Manufacturing excellence is a hall- Obtain level land performance on
mark of John Deere. slopes. Hillmaster slope levelling rec-
• Heavy duty axles provide the load carrying
capacity of level land models, letting you use the ognises changes in slope and auto-
Nowhere is this more evident than in
full capacity of the grain tank matically oscillates the entire combine
the new S690 combine. This machine
• Because the cab remains level, you won’t have body up to 15% to compensate. In
is the result of the tremendous invest-
to fight gravity all day. You can concentrate on combination with the SlopeMaster
ment in research and development, harvesting with less stress and fatigue system, which maintains level land
manufacturing technology and • Equal weight distribution on both front wheels capacity on slopes up to 7%,
Total Quality Management from enhances traction and safety
Hillmaster is able to harvest on slopes
John Deere.
up to 22% with no loss in perform-
A company with the wealth of experi- ance.
ence and resources to build one of the HarvestForm composite shields provide a
modern aesthetic look. John Deere offers high You’ll fill the grain tank completely, so
world’s best machines, capable of quality materials to ensure your combine looks as you have fewer unloading stops. Plus,
handling YOUR tough conditions. good as new – year in, year out.
since the cab remains level, you won’t
have to fight gravity all day. You can
concentrate on harvesting, with less
stress and fatigue.
The HeaderTrak system lets Resume button 1 can be The HeaderTrak monitor
you maintain an even stubble programmed to return to displays information on
height over every centimetre of preselected header height for the header functions at a
your platform, even in rolling long stubble crops. Ideal for glance: active resume
fields or on contours. No harvesting crops like rape or button, HeaderTrak
bulldozing or gouging, even sunflowers or to raise the operating mode, stubble
when you’re cutting low to the platform at the end of the height or ground pressure,
ground in laid crop. Plus, you field. reel resume and the tilt
In addition to extensive field testing, all can work at faster field speeds angle of the header.
John Deere combines spend thousands of hours and put more grain in the Resume button 2 can be
on a test track and on test stands at independent combine. used to maintain a preset
structural testing facilities. Engineers employ the And you can operate with stubble height, for example,
very latest in fatigue and endurance testing to confidence at night or in dusty in standing cereals, using
prove the integrity of the structural components conditions. ground contact of the
of the S690. It’s just one more example of how The John Deere Advantage
State-of-the-art design. John Deere mechanical sensors. Two pairs of mechanical
The high quality standard at John Deere factories is based on individual responsibility for quality. Continuous John Deere engineering leadership builds in • Hillmaster automatic levelling oscillates
engineers worked with the world’s most sensors, (one under each
audits include an assembly run off audit of each machine and first customer audits. greater strength and reliability, so you can the entire combine body up to 15% for
advanced software to create these Resume button 3 may be side of the platform)
harvest at your best. level land performance on slopes
outstanding S690 combines. Pro-E design programmed to maintain a continuously measure the
Zweibrücken factory was the first combine factory to receive the ISO 9001 quality certification, closely followed header ground clearance. • In combination with SlopeMaster
software allowed the engineers to design preset header ground
the line with incredible precision for
by Harvester Works. This ensures that all manufacturing processes are closely monitored to give premium qual- Their forward location harvest on slopes up to 22% with no
pressure for perfect contour
unmatched in-field reliability. ity for each combine that leaves the factory. ensures a quick response. loss in performance, reduce unloading
following in laid crops.
stops and save grain
24 25
S690 Combine S690 Combine Specifications*
The S690: Excellence in Engineering
More than a combine … it’s a
whole new way to look at FEEDERHOUSE
Feederhouse Width (mm) 1397
harvesting. With features such as Feederhouse Length (mm) 1727
AutoTrac and HarvestSmart every New developments … new value Built especially for the European market. Two S-Series Header Reverser Mech./Hydr. Actuated
• New developments… new value combine variants have taken other parts of the world by Header Reverser Power (hp) 100
operator can harvest at full capacity, storm, overwhelming farmers and contractors with Lateral Tilt – Standard (degrees) ±9
• New 13.5 litre engine delivers more power unmatched capacity, power and convenience. But the The largest grain tank capacity: Lateral Tilt – Hillmaster (degress) ± 18
all day, every day. 11,000 litres. The high horsepower Header Fore/Aft Tilt – Standard (degress) ±9
for solid performance in all conditions. tough, high yielding crops you face require more power, Feederhouse Speed (rpm) Standard 520
and insatiable appetite for crop
In terms of operator comfort and pro- • New cab and controls give you easier more throughputs and even more capacity. Which is why Feederhouse Speed (rpm) Option 520 – 780
access to vital machine functions and John Deere has introduced the S690 combine for Europe. demands a larger grain tank to THRESHING AND SEPARATING
ductivity, it’s easy to see that the maintain peak productivity… and Threshing Elements 15/24
readings. Feeding and Threshing Section Diameter (mm) 750
S690 combine is difficult to beat. In the S690 won’t disappoint. Separating Section diameter (mm) 834
• New performance features like the multi- Separating Tines 24
addition to being John Deere’s highest speed feederhouse drive, new discharge Total STS Rotor Length (mm) 3130
horsepower combine, the S690 fea- beater and improved clean grain handling Rotor Speed Range (rpm) 210 – 1000
Concave Types 3
tures the largest grain tank and the system increase capacity and performance Concave Area (sq.m) 1.10
in various crops and conditions. Separating Grate Area (sq. m) 1.50
fastest unloading system – a combi- Discharge Grate Area (sq.m) 0.40
nation designed to help you harvest Total Separation Area (sq. m) 3.00
CLEANING SYSTEM
more than you ever thought possible. Type of Cleaning Fan Scroll design
Clenaing Fan Diameter (mm) 500
Number of Fan Blades 12
Look deeper and you’ll find something Total Cleaning Area (sq m.) 5.25
even more amazing – the exclusive The highest horsepower: Cleaning fan speed (rpm) 620 – 1350
GRAIN TANK
Hi-Performance S-Series Separation 530 hp (ECE R120). Volume (L) 11,000
The only combine with S-Series technology. John Deere’s new 13.5 litre Unloading Auger Length (m) 6.86
system. This harnesses the machine’s The S690 may look like a rotary combine but it’s Unloading Height, with tire 800/65 R32 (m) 4.48
PowerTech Plus engine Unloading Rate (L/sec.) 120
awesome power to deliver outstand- much more. Thanks to the innovative Hi- delivers this unmatched ENGINE
ing throughput. Performance S-Series threshing and separating power output to handle the John Deere PowerTech Plus. 6 Cylinder, Turbocharged, air-to-air after-cooled, diesel
system, the S690 can handle loads that would widest headers, heaviest Engine Type 6135HZ001
Displacement 13.5 l
Recent enhancements – such as choke a conventional rotary. yields and fully loaded grain Rated Speed (rpm) 2200
improved grain cleaning and clean tanks. New CANBUS electrical system Maximum Harvesting Power (IECE R120) (kW/hp) * 395 / 530
improves overall reliability and *at engine speed (rpm) 2100
grain handling systems, the rede- delivers easier and quicker
Power Boost when unloading (kW/hp) 25 / 33
Fuel Tank Capacity (L) 1155
signed cab, and higher powered diagnostic time. Hydraulic / Hydrostatic Reservoir (L) 35
GROUND DRIVE
engine – make this machine an even Transmission Type 3 speeds
better choice. Just ask your Hydrostatic Pump Capacity (ccm) 105
Final Drives Type single reduction
John Deere dealer. Final Drives Ratio 95:10
800/65 R32 Drive tires Standard
540/75 R28 Steering Axle Tires Standard
ELECTRIC SYSTEM
Alternator (amp) 200
DIMENSIONS**
Weight (without header) (kg) Standard 15,636
Weight (without header) (kg) Hillmaster 16,586
Transport Height (e.g. with tire 800/65 R32) (m) 3.98
TRANSPORT WIDTH
710/75 R38 Front Tyre & 480/80 R26 Rear Tyre (m) 3,48
800/65 R32 Front Tyre & 620/70 R26 Rear Tyre (m) 3,75
800/70 R38 Front Tyre & 620/70 R26 Rear Tyre (m) 3,75
900/60 R32 Front Tyre & 620/70 R26 Rear Tyre (m) 3,91
1050/50 R32 Front Tyre & 750/65 R26 Rear tyre (m) 4,28
*Specifications and design subject to change without notice
**Data varies depending on specifications
Extended hours during harvest. Most John Deere dealerships are open
early and stay open late to provide the service you need, when
you need it.
Around the clock parts support. John Deere dealers keep the majority
of the maintenance parts you need in stock in their parts department.
A computerised global parts inventory allows dealers to find and order
those hard to find parts quickly – all with next day delivery.
1/1/2
9/07
This literature has been compiled for worldwide circulation. While general
information, pictures and descriptions are provided, some illustrations and
YY0714238E
www.johndeere.co.uk “Take the credit for buying the best” text may include finance, credit, insurance, product options and accessories
John Deere Credit – A range of finance options as powerful as our NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER FOR
www.JohnDeereInternational.com DETAILS. John Deere reserves the right to change specification and design
products. Contact your John Deere dealer for a comprehensive
www.johndeere.co.za range of finance options to suit the specific needs of your business. of products described in this literature without notice. John Deere’s green
and yellow colour scheme, the leaping deer symbol and JOHN DEERE are
www.deere.com.au Not available in all countries please consult your local dealers.
trademarks of Deere & Company. RELIABILITY IS OUR STRENGTH