Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 7

I J K

28 25 15

deminsion for each block at I- and J- direction First later of Reservoir starts at Depth = 9010 ft
300 ft

Permeability layer porosity thickness


i j k all 0.187 25
140 mD 180 mD 40 mD
pth = 9010 ft

Rock Compressibility 1.00E-06 1/psi


Ref pressure 3600 psi
Ref depth 9035 ft
Water Oil Contact 9950 ft
P Rs Bo Zg Viso Visg Initial Temperature 100
14.7 0 1 0.9999 1.2 0.0125 Stock Tank Oil Density 0.7206
400 165 1.012 0.8369 1.17 0.013 Water density 1.0095
800 335 1.0255 0.837 1.14 0.0135 Gas Gravity 0.92
1200 500 1.038 0.8341 1.11 0.014 Water FVF (Bw) 1.0034
1600 665 1.051 0.8341 1.08 0.0145 FVF ref Pressure 3600
2000 828 1.063 0.831 1.06 0.015 Cw 1.00E-06
2400 985 1.075 0.8341 1.03 0.0155 Water Viscosity 0.96
2800 1130 1.087 0.8341 1 0.016
3200 1270 1.0985 0.8398 0.98 0.0165
3600 1390 1.11 0.8299 0.95 0.017
4000 1500 1.12 0.83 0.94 0.0175
F
g/cm3
g/cm3

RB/STB
psi
1/psi
cp
Sw Krw Krow Pcw Sg Krg Krog Pcg
0.15109 0 1 400 0 0 1 0
0.15123 0 0.99997 359.19 0.04 0 0.6 0.2
0.15174 0 0.99993 257.92 0.1 0.022 0.33 0.5
0.15246 0 0.99991 186.31 0.2 0.1 0.1 1
0.15647 0 0.99951 79.06 0.3 0.24 0.02 1.5
0.16585 0 0.99629 40.01 0.4 0.34 0 2
0.17835 0 0.99159 27.93 0.5 0.42 0 2.5
0.20335 0.00001 0.97883 20.4 0.6 0.5 0 3
0.25335 0.00003 0.94373 15.55 0.7 0.8125 0 3.5
0.356 0.0001 0.7841 11.655 0.84891 1 0 3.9
0.3605 0.0001 0.7646 8.72
0.365 0.0001 0.7454 5.947
0.3695 0.0002 0.7265 3.317
0.374 0.0003 0.7078 1.165
0.3785 0.0004 0.6895 0.463
0.383 0.0005 0.6714 -0.499
0.3875 0.0006 0.6535 -1.139
0.392 0.0007 0.636 -1.194
0.38 0.0009 0.6187 -1.547
0.4 0.001 0.6016 -1.604
0.4685 0.0077 0.3779 -1.71
0.473 0.0085 0.365 -1.78
0.4775 0.0094 0.3524 -1.86
0.482 0.0103 0.3401 -1.93
0.4865 0.0113 0.328 -2.07
0.5 0.0146 0.2931 -2.13
0.608 0.0687 0.0905 -2.26
0.735384 0.2303 0.0026 -2.38
0.771384 0.3031 0 -2.6
0.88149 0.49 0 -2.75
0.99 0.49 0 -2.75
Simulation Time 5000 Days wellbore radius 0.5

Maximum oil flow rate


Producer Location layer Time period (standard conditions)
1 (1, 1) 2 to 4 0 to 5000 days 1500

Min BHP 1000

Injector Injection Pressure 4000


1 (28,25) 11 to 15 Injection Fluid water
Injection rate 5000
ft

bbl/day

psi
Parameters Layer Unit
Simulation Time 5000 Days
Producer Location and Layer (1, 1) 2 to 4
Injector Location and Layer (28,25) 11 to 15
psi wellbore radius 0.5 Ft
Min BHP 1000 psi
bbl/day Injection Pressure 4000 psi
Injection Fluid water
Injection rate 5000 bbl/day

You might also like