陆空对话 (中英对照)

You might also like

Download as txt, pdf, or txt
Download as txt, pdf, or txt
You are on page 1of 5

一:请求放行许可

CXN8888:江北放行,CXN8888,在 106 号桥位,型号 B747-400,请求仪表放放行许可到成都双流机场,通播


收到 Alpha.

CXN8888:JiangBei Delivery,CXN8888 at JiangBei Airport,stand 106,type is Boeing


B747-400,request IFR clearance to Chengdu Shuangliu with Information Alpha.

ZUCK:CXN8888 可以放行至成都双流机场,按照计划航路飞行,XX 离场,跑道 02,起始高度 XX 米,修正海压


1013,应答机 2000

ZUCK:CXN8888 you are Cleared IFR to Chengdu Shuangliu as filed,via XX(离场程序)


departure Runway 02,initial climb XX metres,QNH 1013 at Squawk Code 2000

CXN8888:复述上面然后设置应答机。设置离场程序。

二:推出开车与滑行

A:向 ATC 请求推出与启动发动机

CXN8888:江北地面,CXN8888,桥位 106,请求推出开车。
CXN8888: Jiangbei Ground,CXN8888 at stand 106,request push and start.

ZUCK: CXN8888,可以推出开车,滑出叫。
ZUCK: CXN8888,push and start is approved.Call back when finished.

CXN8888: 复述上面并推出开车.

B:向 ATC 请求滑行。

CXN8888: 江北地面,CXN8888 请求滑行。


CXN8888: JiangBei Ground, CXN8888,request taxi

ZUCK: CXN8888,滑行到跑道 02 外等待,修正海压 1013.


ZUCK: CXN8888,taxi to and hold short runway 02,QNH 1013.

CXN8888:复述上面并自主滑行至 02 外等待。

B1:不熟悉机场可以自主滑行,可以用以下单词。
CXN8888: 江北地面,CXN8888 请求自主滑行。
CXN8888: Jiangbei Ground,Unfamiliar with the airport,request taxiway of my choice.

C:向 ATC 报告跑道外等待。

CXN8888: 江北塔台,CXN8888 跑道 02 外等待。


CXN8888: Jiangbei Tower,CXN8888 is holding short of runway 02.

三.起飞

1:上跑道直接起飞

ZUCK: CXN8888,地面风 XX,XX 米每秒,可以起飞跑道 02。


ZUCK: CXN8888,surface wind XX at XX metres per second,cleared for takeoff runway
02.

CXN8888: 可以起飞跑道 02,CXN8888


CXN8888: Cleared for takeoff runway 02,CXN8888.
上跑道,然后加速起飞。

2:上跑道等待起飞

ZUCK: CXN8888,可以上跑道 02 等待。


ZUCK: CXN8888,line up runway 02 and hold.

CXN8888:上跑道 02 等待,CXN8888。
CXN8888:Line up runway 02 and hold,CXN8888.

ZUCK: CXN8888,地面风 XX,XX 米每秒,可以起飞跑道 02。


ZUCK: CXN8888,surface wind XX at XX metres per second,cleared for takeoff runway
02.

CXN8888: 可以起飞跑道 02,CXN8888


CXN8888: Cleared for takeoff runway 02,CXN8888.
上跑道,然后加速起飞。

四:离场与巡航

1.报告空速

ZUCK:CXN8888,请报告空速。
ZUCK:CXN8888,please report your indicate airspeed.

CXN8888: 收到,指示空速 280 节,CXN8888。


CXN8888: Roger,Indicate airspeed 280 knots,CXN8888

2.调节空速

ZUCK:CXN8888,调速 260。
ZUCK:CXN8888,reduce/indicate airspeed 260 knots.

CXN8888: 收到,调速 260。


CXN8888: Roger,reduce/indicate airspeed 260 knots,CXN8888.

3.限制空速

ZUCK:CXN8888,速度 230 过五凤溪。


ZUCK:CXN8888,Maintain speed 230 knots until WFX.

CXN8888: 收到,速度 230 过五凤溪。


CXN8888: Roger,speed 230 knots until WFX.

4.取消限制空速。

ZUCK:CXN8888,取消速度限制。
ZUCK:CXN8888,Cancel speed restriction.

CXN8888:收到,取消速度限制,CXN8888
CXN8888:Roger,Cancel speed restriction,CXN8888.

5.调节航向

ZUCK:CXN8888,右转航向 360
ZUCK:CXN8888,turn right heading 360

CXN8888:收到,右转航向 360,CXN8888。
CXN8888:Roger,turn right heading 360,CXN8888.

6.直飞某点

ZUCK:CXN8888,直飞 WFX
ZUCK:CXN8888,direct to WFX

CXN8888: 收到,直飞 WFX,CXN8888.


CXN8888: Roger,direct to WFX,CXN8888.

7.爬升

ZUCK:CXN8888,上升到高度 2400 米,修正海压 1014。


ZUCK:CXN8888,climb Altitude 2400 metres on QNH 1014.

CXN8888: 收到,上升到高度 2400 米,修正海压 1014,CXN8888.


CXN8888: Roger,climb Altitude 2400 metres on QNH 1014,CXN8888.

ZUCK:CXN8888,上升到标准气压 7200 米.
ZUCK:CXN8888,climb Flight Level 7200 metres.

CXN8888: 收到,上升到标准气压 7200 米,CXN8888


CXN8888: Roger,climb Flight Level 7200 metres,CXN8888.

8.下降

ZUCK:CXN8888,下降标准海平面气压 6600 米。
ZUCK:CXN8888,descend Flight Level 6600 metres.

CXN8888: 收到,下降标准海平面气压 6600 米,CXN8888.


CXN8888: Roger,descend Flight Level 6600 metres,CXN8888.

ZUCK:CXN8888,下降到高度 1500 米,修正海压 1014.


ZUCK:CXN8888,descend Flight Level 6600 metres on QNH 1014.

CXN8888: 收到,下降到高度 1500 米,修正海压 1014,CXN8888.


CXN8888: Roger,descend Flight Level 6600 metres on QNH 1014,CXN8888.

9.管制移交
ZUCK:CXN8888,联系离场 123.45,再见.
ZUCK:CXN8888,Contact departure on 123.45,Goodbye.

CXN8888: 收到,联系离场 123.45,再见,CXN8888.


CXN8888: Roger,Contact departure on 123.45,Goodbye.CXN8888

ZUCK:CXN8888,您已经离开我的管制区域,前方没有在线 ATC,请切换频率至 Unicom,再见


ZUCK:CXN8888,You are leaving my airspace,No ATC forward,please switch to
Unicom,goodbye.

CXN8888: 收到,离开你的管制区域,前方没有 ATC 在线,切换频率至 Unicom,再见.CXN8888


CXN8888: Roger,leaving your airspace and No ATC forward,frequency change to
Unicom,Goodbye.CXN8888

五:进近与降落

1.使用标准仪表进场程序
ZUUU: CXN8888,BHS 过后加 XX 进场,预计 ILS 跑道 02。
ZUUU: CXN8888,After BHS join XX arrival,expect ILS approach Runway 02.

CXN8888: 收到,BHS 过后加 XX 进场,预计 ILS 跑道 02,CXN8888


CXN8888: Roger,After BHS join XX arrival,expect ILS approach Runway 02,CXN8888

2.雷达引导 ILS 盲降

ZUUU: CXN8888,右转航向 360 度,可以建立盲降跑道 02,报告建立航路


ZUUU: CXN8888,turn right heading 360,cleared ILS approach runway 02 and report when
localizer established.

CXN8888: 收到,右转航向 360 度,可以建立盲降跑道 02,报告建立航路,CXN8888。


ZUUU: CXN8888,,turn right heading 360,cleared ILS approach runway 02 and call back
when localizer established,CXN8888.

截获 ILS 定位仪信号

CXN8888: 成都进近,CXN8888,已经建立航道 02
CXN8888: Chengdu approach,CXN8888 localizer established runway 02.

ZUUU: 收到,CXN8888,调速 160 节,继续进近跑道 02。


ZUUU:Roger,CXN8888,Please reduce 160 knots and countiue approach.

3.降落许可

ZUUU:CXN8888,联系塔台 118.100,再见
ZUUU:CXN8888,contact Tower on 118.100,Bye.

ZUUU: 收到,联系塔台 118.100,再见,CXN8888


ZUUU:Roger,contact Tower on 118.100,Bye,CXN8888

调至塔台频率

CXN8888: 成都塔台,CXN8888,ILS 盲降跑道 02,5 海里。


CXN8888: Chengdu Tower,CXN8888 ILS approaching runway 02,five miles.
ZUUU: CXN8888,地面静风可以落地,跑道 02
ZUUU: CXN8888,surface wind calm you are cleared to land runway 02

CXN8888: 收到,可以落地跑道 02,CXN8888


CXN8888: Roger,cleared to land runway 02,CXN8888

4.脱离,滑行和关车

CXN8888: 成都塔台,CXN8888 跑道 02 脱离了


CXN8888: Chengdu Tower,CXN8888 runway 02 vacated.

ZUUU: CXN8888,滑行到任意桥位,滑行道任意,到位时报告。
ZUUU: CXN8888,taxi to the stand of your choice and report when at the position.

CXN8888: 收到,滑行到任意桥位,滑行道任意,到位时报告,CXN8888.
CXN8888: Roger,taxi to the stand of your choice and report when at the
position,CXN8888.

停到桥位后
CXN8888: 成都地面,CXN8888,到达桥位,准备关车。
CXN8888: Chengdu Ground,CXN8888 at stand,ready to shutdown.

ZUUU: CXN8888,可以关车,飞行计划关闭在 19 分,再见


ZUUU: CXN8888,Shurdown approved.Your flight plan closed at 19.Goodbye.

CXN8888: 收到,可以关车,飞行计划关闭在 19 分,CXN8888,再见


CXN8888: Roger,Shurdown approved and flight plan closed at 19.CXN8888,Goodbye.

本文由 CXN8888(唐庆辉对照整理编写),QQ:370141

You might also like