Professional Documents
Culture Documents
Q3 TLE Exploratory Carpentry
Q3 TLE Exploratory Carpentry
3rd QUARTER
WORKSHEET 1
Name: Score:
Date received: Date returned:
Multiple Choice
Directions: Read the questions carefully., Encircle the letterof the correct answer.
1. What kind of chisel has an upper portion with a hollow cone form that is where the
handle is placed?
A. Socket chisel C. Ordinary flat chisel
B. Beveled chisel D. Tang firmer chisel
2. What tool has a steel blade sharpened to a cutting edge and held firmly in place by a
wooden handle?
A. Chisel B. Spokeshave C. Iron smooth plane D. Wooden smooth plane
3. Which of the following tools is used to indicate the desired width and thickness of wood
or to make lines along the grain of wood?
A. Pencil B. Chalk line C. Metal rule D. Marking gauge
6. What is used for marking line in equal distances along the edge of wood?
A. Pencil B. Divider C. Compass D. Marking gauge
10. What do you call a board that is erected on a building's exterior to shield it from
inclement weather?
A. Molding B. Floorboard C. Baseboard D. Siding wood boar
IDENTIFICATION
Directions: Identify what is defined or described. Select your answer from the box below.
_____________4. It is a fine, dry, grippy substance that has been combined with water.
I. MULTIPLE CHOICE
Directions: Read the following questions carefully. Encircle the letter
of the correct answer.
A. Functional C. Non-functional
B. To be repaired D. To be replaced
5. What is the procedure for reshaping the cutting edge of a plane or chisel
to remove the nick?
6. Pencil
Driving Tools
7. Pull-push rule
PPE
8. Chisel
Marking
Lining Yools
9. Apron
I. MULTIPLE CHOICE
Directions: Read each of the following questions carefully. Then, encircle the letter of the
correct answer.
1. Which type of rule, ranging in height from 4 feet, 1.20 meters to 6 feet, 1.80 meters, is
most frequently used by carpenters for rough layout?
A. Caliper C. Pull-push
B. Zigzag D. Measuring Tape
2. Which of the following types of rules is used to measure interior distances such those in
rooms, windows, and cabinets?
A. Zigzag C. Pull-push
B. Extension D. Measuring tape
4. What measuring instrument used to measure greater distance between 25 and 100
meters?
A. Zigzag Rule C. Measuring Tape
B. Extension Rule D. Push-pull Rule
5. What is used to measure the outsid diameter of cylindrical objects?
II. IDENTIFICATION
Directions: Identify the kind of measuring tools used in each specific task given. Write your
answer on the space provided.
I. MULTIPLE CHOICE
Directions: Read the following questions carefully. Encircle the letter of the
correct answer.
3. How many inches are in one meter when converting linear measurements?
A. 29.37 B. 36.37 C. 39.37 D. 40
Directions: Compute for the number of board foot of a lumber based on the
measurements below. Write your answer inside the box. Show your solution..
Problem 1 Problem 2
MULTIPLE CHOICE
Directions: Read the items carefully and encircle the letter of the correct
answer.
1. The following are the essential skills that a carpentrer must possessed
which of this is not?
A. Ability to read and interpret working plan.
B. Poor physical strenght and stamina
C. Complete the project efficiently and accurately.
D. It provides and transmit a complete and accurate graphic depiction of
the project design concept, to scale.
3. Which of these form part of the working drawings needed for any
construction project?
A. Elevation and Details
B. Site plan and Floor plan
C. Building plans and Specification
D. Perspective and Techncal Drawing
5. These are the types of commonly used drawing for building design
EXCEPT
A. Details B. Elevation C. Site plan D. Carpentry
Answer key
Worksheet 1 Worksheet 2 Worksheet 3 TLE_IACP7/8ID-0f-1
Worksheet 4
TLE_IACP7/8ID-0f-2
1. A 1. Plywood 1. D 1. B
2. D 2. Nails 2. B 2. B
3. D 3. Cement 3. C 3. C
4. D 4. Sand 4. C 4. C
5. B 5. Lumber 5. B 5. A
6. B 6. Pull-push rule 6. Marking lining tool 6. Pull-push Rule
7. D 7. Claw hammer 7. Measuring tools 7. Zigzag Rule
ADM – OHSP Worksheet Writers (TLE 7/8)- Carpentry):
1. Lucy P. Santiago (Team Leader) Plaridel NHS
2. Menchu C. Joya Iraan-Sagpangan NHS
3. Baby Litlit S. Villanueva Culion NHS
4. Lloyd P. Gabinete Isla Sombrero NHS
5. Esperiidion B. Dangan San Jose (Roxas) NHS
6. Raymond Luis E. Rodriguez Enil U. Taha NHS
8. C 8. Rip saw 8. Edge cutting tool 8. Caliper
9. B 9. Plumb-bob 9. PPE 9. Measuring Tape
10. D 10. Try-square 10. Driving tool 10. Extension Rule
Worksheet 5 Worksheet 6