Professional Documents
Culture Documents
Coc Qustons
Coc Qustons
COC QUESTIONS
Choose the best answer from the following alternatives.
1) How many magnetic contactors are required for forward and reverse motor operation?
A) 5 B) 3 C) 2 D) 1
2) How many magnetic contactors are required for direct on line (DOL) motor operation?
A) 5 B) 3 C) 2 D) 1
3) How many magnetic contactors are required for star delta motor operation?
A) 5 B) 3 C) 2 D) 1
4) How many magnetic contactors are required for forward reverse& star delta motor operation?
A) 4 B) 3 C) 2 D) 1
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
20) A protective device in staled in a control circuit to protect the winding of the motor.
A) Over load protective device C) Under load protective device
B) Over current protective device D) Under current protective device
21) A protective device in stalled in the ckt to protect the conductor and it may exist in the form
of fuses and circuit breakers.
A) Over load protective device C) Under load protective device
B) Over current protective device D) under current protective device
22) A kind of momentary and auxiliary switch that breaks contact
A) Normally open switch
B) Normally closed switch
C) Selector switch
D) A & B
23) Which of the following circuit in industrial electrical machine and drives that usually operates
in a higher voltage and high current demand?
A) The control circuit C) The enclosure circuit
B) The power circuit D) The maintaining circuit
24) An electro magnetically switch used in motor controlling engineering
A) Magnetic contactor
B) FB push button switch
C) Three way switch
D) Selector switch
E) All of the above
25) What is the current rating of a protective device installed for a 7.2KW, 240V rated water
heater.
A) 10A B) 40A C) 16A D) 25A E) 32A
26) Power factor correction is necessary to:
A) Has no effect in reducing the load for the generator and the transformer
B) Increased efficiency of electric motors and other devices
C) Prevent from dangerous over currents
D) Reduce the resistance of the circuit
27) A means of making single-phase AC motors self-starter is
A) Splitting the phase C) Shading pole
B) Inserting capacitors D) All
28) Which one of the following is correct statement?
A) Induction motors can speed up near to synchronous speed but it can never reach
synchronous speed
B) Induction motor is similar to a rotating transformer but unlike the transformer, the
secondary frequency may not be the same as the primary
C) The higher the speed of an induction motor, the higher the friction, windage and
stray losses
D) All
29) One of the following statement is not true
A) Closing the forward and reverse contactors at the same time would cause a short
ckt
B) The starter contacts of a manual starter remains closed when power is removed
from the ckt
C) A motor with low voltage releases protection must be restarted up on resumption
normal supply voltage
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
D) Most DC motors are reversed by switching the direction of current flow through
the armature
30) We use reduced voltages starting system
A) To minimize line disturbance caused by high inrush current
B) To limit the inrush
C) To provide smooth acceleration
D) All
31) A means of motor running in which the motor remains connected to line during the transition
A) Open transition C) Abnormal transition
B) Closed transition D) None
32) The running current of a motor is higher in
A) Star B) reduced voltage starting C) delta D) all
33) The rotation speed of an asynchronous motor can be increased by
A) Increasing the voltage C) Increasing the frequency
B) Increasing the current D) Decreasing the voltage
34) The efficiency of an electrical machine is calculated
A) The ratio b/n input power and output power
B) The ratio b/n output voltage and input voltage
C) The ratio b/n output power and input power
D) All
35) The stator of a single phase alternator is laminated, for what purpose
A) To increase the life span of the machine
B) To create free and smooth rotation
C) To eliminate hysteresis loss
D) To eliminate eddy current
36) What is the part of the AC squirrel cage induction motor where the winding coils are situated
or placed in?
A) Rotor B) stator C) frame D) shaft E) none
37) What is the average speed of a 3-phase synchronous motor with 4-pole, 220V, 50HZ?
A) 1000r.p.mB) 2750r.p.m C) 1500r.p.m D) 3000r.p.m
38) How to reverse the rotation of a 4-terminal split phase motor
T1
T2
T3
T4
A) By changing T1 and T2
B) By changing T3 and T4
C) By changing centrifugal switch
D) By changing T2 and T3
E) None
39) Stop push button is
A) Connected in series with start P.B
B) Connected in parallel with start P.B
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
COLLECTED BY Asmelash . H
NGSTE SABA TECHNICAL COLLEGE, ADWA
COLLECTED BY Asmelash . H