Professional Documents
Culture Documents
RRB Je CBT 2 Me 29 Aug 2019 Shift 1 English
RRB Je CBT 2 Me 29 Aug 2019 Shift 1 English
RRB Je CBT 2 Me 29 Aug 2019 Shift 1 English
tbapp
Page - 1
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Exam Exam
: AADHI_II_TECH_MECH1 : 29-08-2019
Code Date
Exam
Version : : 10:00 - 12:00
Time
Question No. 1
A) केट B) हॉक
C) गो फ़ D) टे बल टे नस
A) Cricket B) Hockey
Question No. 2
C) ल टल डपर D) बग डपर
The constellation Ursa Minor contains the group of stars commonly called the-
Question No. 3
इनम से कौन सी सच
ू ी लागत आपू त म कमी क वजह से मांग के होने वाले नक
ु सान क लागत को न पत
करती है ?
Page - 2
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Which of the following inventory costs represents the cost of loss of demand due to shortage in
supplies?
Question No. 4
Question No. 5
C) शीतलन (Cooling) D) पन
ु तापन (Reheating)
The process of maintaining the speed of a steam turbine constant for various load conditions is
known as-
A) Governing B) Bleeding
C) Cooling D) Reheating
Question No. 6
कसी दए गए दशा म कई बल के वयोिजत घटक का बीजग णतीय योग, उसी दशा म उनके प रणामी
Page - 3
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) वक प म से सभी D) बल क संचरणता का स ा त
The algebraic sum of the resolved parts of a number of forces in a given direction is equal to
the resolved part of their resultant in the same direction. This is known as-
Question No. 7
एक चतथ
ु ाश (Quarter circle) का इसके यास के सापे जड़ व आघण
ू कतना होता है ?
A) πd2/36 B) πd4/256
C) πd4/128 D) πd4/64
What is the Moment of Inertia of a Quarter circle about its Diametral Axis?
A) πd2/36 B) πd4/256
C) πd4/128 D) πd4/64
Question No. 8
Page - 4
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 9
जब कसी पंड पर दो बराबर एवं वपर त खंचाव बल लगाए जाते ह, िजसके प रणाम व प पंड क लंबाई
बढ़ती है , तो इसम े रत तबल एवं वकृ त (stress and strain) _________ होते ह।
When a body is subjected to two equal and opposite pulls, as a result of which the body tends
to extend its length, the stress and strain induced are-
A) Compressive stress and tensile strain B) Tensile stress and tensile strain
Question No. 10
A) CCl3F B) CClHF
C) CHF D) CClF3
A) CCl3F B) CClHF
C) CHF D) CClF3
Question No. 11
Page - 5
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) र मंग D) न लग
C) Reaming D) Knurling
Question No. 12
ोजे ट पण
ू होने के समय को भा वत कए बना कसी ग त व ध म क जा सकने वाल दे र क अव ध को
या कहा जाता है ?
The amount of time by which an activity can be delayed without affecting project completion
time is-
Question No. 13
A) े फल का पहला आघण
ू B) े फल का वतीय आघण
ू
C) यमान जड़ व आघण
ू D) यमान का वतीय आघण
ू
The product of area and square of distance of centre of gravity of the area from that axis is
known as-
Page - 6
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 14
In 2019, who was appointed the Indian men’s football team coach?
Question No. 15
Question No. 16
The minimum angle made by an inclined plane with the horizontal such that an object placed on
the inclined surface just begins to slide is called-
Page - 7
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 17
कसी व तु क मांग दर 12000 नग/वष है । ऑडर करने क लागत . 100 त ऑडर है और धारण लागत
. 0.80 त आइटम त माह है । य द कोई भी कमी अनम
ु य नह ं है और त थापन ता णक है , तो
आ थक आदे श मा ा ात क िजए।
A) 500 नग B) 1500 नग
C) 1000 नग D) 2000 नग
The demand rate for a particular item is 12000 units/year. The ordering cost is Rs.100 per order
and the holding cost is Rs.0.80 per item per month. If no shortages are allowed and the
replacement is instantaneous, then the economic order quantity is-
Question No. 18
Question No. 19
Page - 8
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) ए चअ
ु ल ोट (Actual throat) D) फेस
The distance from the joint root to the toe of the weld is called-
Question No. 20
A) 15% से 20% B) 1% से 2%
Question No. 21
ए यम
ू ी नयम परमाणु का इले ॉ नक व यास ात कर।
A) 8, 2, 3 B) 2, 8, 3
C) 2, 8, 2 D) 2, 3, 8
A) 8, 2, 3 B) 2, 8, 3
C) 2, 8, 2 D) 2, 3, 8
Question No. 22
52 ाम He के लए मो स क सं या ात कर।
A) 14 B) 12
Page - 9
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) 13 D) 11
A) 14 B) 12
C) 13 D) 11
Question No. 23
C) पै सव सेल D) म ड सेल
Question No. 24
Question No. 25
_______________ घण
ू न ग त का एक उदाहरण है ।
A) एक मेज के दराज क ग त B) प ृ वी का घम
ू ना
Page - 10
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) सय
ू के चार ओर प ृ वी क ग त D) एक सीधी सड़क पर कार क ग त
Question No. 26
A) घषण बल हमेशा पंड क ग त के वपर त दशा B) घषण बल, दोन सतह के बीच संपक े फल पर
म काय करता है । नभर करता है ।
C) घषण बल सतह के खरु दरे पन/ चकनाई पर नभर D) सीमांत घषण (limiting friction) के प रमाण और
करता है । दो संप कत सतह के बीच सामा य त या के
बीच का अनप
ु ात ि थर होता है ।
A) The frictional force always acts in a B) The force of friction is dependent of the
direction opposite to that in which the body area of contact between the two surfaces
tends to move
C) The force of friction depends upon the D) The magnitude of the limiting friction bears
roughness/smoothness of the surfaces a constant ratio to the normal reaction
between
the two contacting surfaces
Question No. 27
A) 8r/3π B) 3r/4π
C) 4r/3π D) 3r/8π
The center of gravity of a semi-circle lies at a distance of __________ from its base measured
Page - 11
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) 8r/3π B) 3r/4π
C) 4r/3π D) 3r/8π
Question No. 28
Question No. 29
A) अनम
ु ेय तबल और वे ड े B) अनम
ु ेय तबल और भार
C) वे ड े और अनम
ु ेय तबल D) भार और अनम
ु ेय तबल
The length of the slot weld can be obtained from the ratio of-
Question No. 30
म यरु लास को गीला नह ं करता है । इसका कारण तरल पदाथ का _____ गुण है ।
C) ऐ ह न D) व को सट
Page - 12
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Mercury does NOT wet the glass. This is due to the property of the liquid known as-
C) Adhesion D) Viscosity
Question No. 31
Question No. 32
A) बैनाईट B) माटसाइट
A) Bainite B) Martensite
C) Austenite D) Ledeburite
Question No. 33
क न क इनम से कस धम के अनय
ु ायी थे?
A) ईसाई धम B) बौ धम
C) जैन धम D) सख धम
Page - 13
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) Christianity B) Buddhism
C) Jainism D) Sikhism
Question No. 34
A) चार क B) पांच क
Doberiener's system of classification into Triad was NOT found to be useful as he could identify
only:
Question No. 35
तइ
ु रयल जल व यत
ु शि त प रयोजना कस रा य म था पत क गई?
A) नागालड B) मज़ोरम
C) म णपरु D) मेघालय
A) Nagaland B) Mizoram
C) Manipur D) Meghalaya
Question No. 36
Page - 14
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) को ड लैप B) न ेपण दर
C) तनक
ु रण D) संगलन गहराई
The distance that fusion extends into the base metal or previous pass from the surface melted
during welding is known as-
Question No. 37
A) Pd/2t B) Pd/t
C) Pd/4t D) Pd/3t
A) Pd/2t B) Pd/t
C) Pd/4t D) Pd/3t
Question No. 38
A) Ratio of height of object to the height of B) Ratio of object distance to the image
image distance
Page - 15
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) Ratio of focal length to radius of curvature D) Ratio of height of the image to the height of
the object
Question No. 39
A) केि वन B) यट
ू न
C) कलो ाम D) पा कल
A) Kelvin B) Newton
C) Kilogram D) Pascal
Question No. 40
C) फे संग D) लंग
A) Boring B) Reaming
C) Facing D) Drilling
Question No. 41
Page - 16
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) Reactivity D) Corrosivity
Question No. 42
A) ेड B) बॉ ड कार
What does 'V' represent in this conventional abrasive wheel given by "51 A 60 K 5 V 05"?
Question No. 43
Question No. 44
A) टं ग टन B) ए यम
ू ी नयम
C) नकल D) तांबा
Page - 17
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) Tungsten B) Aluminium
C) Nickel D) Copper
Question No. 45
A) ता वत अनम
ु ेय समय और पव
ू वत अपे त B) नवीनतम अनम
ु ेय समय और पव
ू वत अपे त
समय समय
C) नवीनतम अनम
ु ेय समय और सामा य अपे त D) सामा य अनम
ु ेय समय और नवीनतम अपे त
समय समय
A) Proposed allowable time and the earliest B) Latest allowable time and the earliest
expected time expected time
C) Latest allowable time and the normal D) Normal allowable time and the latest
expected time expected time
Question No. 46
A) ओजोन हम सय
ू से आने वाले हा नकारक UV B) ओजोन अ य धक याशील है ।
व करण से बचाती है ।
Page - 18
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 47
सच
ू ी पन
ु ःपू त आदे श दए जाने से लेकर आपू तकता वारा माल क डल वर कए जाने तक यय होने वाले
समय को या कहा जाता है ?
The amount of time elapsed from the moment an inventory replenishment order is placed and
the moment the supplier delivers the goods is-
Question No. 48
A) हाइपो-यट
ू े टॉइड टल B) हाइपर यट
ू े टॉइड टल
C) यट
ू े टॉइड टल D) ोयट
ू े टॉइड टल
Question No. 49
A) मै यफ
ू ै च रंग रसोसज ला नंग B) मैट रय स र वायरमट ला नंग
Page - 19
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 50
सह है ?
A) Wm = 6 x We B) Wm = (1/6) x We
C) Wm = 3 x We D) Wm = (1/3) x We
The weight of an object on the Moon is Wm and its weight on the Earth is We. Which of the
following formulas is CORRECT?
A) Wm = 6 x We B) Wm = (1/6) x We
C) Wm = 3 x We D) Wm = (1/3) x We
Question No. 51
The frequency of a sound wave is 50 Hz and its wavelength is 4 m. What is the distance
travelled by the sound wave in 3 s?
A) 200 m B) 100 m
C) 300 m D) 600 m
Question No. 52
वपर त व
ु ता (reverse polarity) वेि डंग म, इले ोड हो डर _________ ।
A) धना मक से जड़
ु ा होता है और कायव तु B) ऋणा मक से जड़
ु ा होता है और कायव तु
ऋणा मक से जड़
ु ी होती है धना मक से जड़
ु ी होती है
Page - 20
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) भस
ू ंप कत होता है और कायव तु ऋणा मक होती D) भस
ू ंप कत होता है और कायव तु धना मक होती
है है
A) Connected to the positive and work to B) Connected to the negative and work to
negative positive
Question No. 53
Which of the following gases is NOT used as shielding gas in arc welding?
Question No. 54
EBCDIC का पण
ू प या है ?
A) ए सटडेड बाइनर कोडेड डे समल इंटरचज कोड B) ए है ड बाइनर कं ोल डेटा इंटरचज कोड
C) ए सटडेड बाइनर कं ोल डे समल इंटरचज कोड D) ए है ड बाइनर कोडेड डेटा इंट ेशन कोड
Page - 21
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 55
A) 20 सेमी4 B) 16 सेमी4
C) 12 सेमी4 D) 9 सेमी4
The moment of inertia of a rectangular section 3 cm wide and 4 cm deep about X-X axis
passing through centre is-
A) 20 cm4 B) 16 cm4
C) 12 cm4 D) 9 cm4
Question No. 56
A) ऑ सी लोराइड B) रबर
C) स लकेट D) शेलक
Which of the following bonds is represented by the letter 'E' in grinding wheel?
A) Oxychloride B) Rubber
C) Silicate D) Shellac
Question No. 57
Page - 22
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 58
A) Nichrome B) Niobium
C) Neon D) Nitrogen
Question No. 59
A) स शन ोक के अंत B) ए जॉ ट ोक क शु आत
C) ए जॉ ट ोक के अंत D) स शन ोक क शु आत
In a four-stroke cycle, the minimum temperature inside the engine cylinder occurs at the-
Question No. 60
CSIR का पण
ू प या है ?
A) सटर फॉर साइंस एंड इंड रसच B) सटर फॉर साइं ट फक एंड इं डया रसच
C) काउं सल फॉर साइंस एंड इंड रसच D) काउं सल ऑफ़ साइं ट फक एंड इंडि यल रसच
A) Centre for Science and Industry Research B) Center for Scientific and India Research
Page - 23
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 61
मौजद
ू ा ेजटे शन म एक नई लाइड व ट करने के लए शॉटकट कंु जी (shortcut key) या है ?
A) Ctrl + F B) Ctrl + M
C) Ctrl + O D) Ctrl + N
What is the shortcut key to insert a new slide into the current presentation?
A) Ctrl + F B) Ctrl + M
C) Ctrl + O D) Ctrl + N
Question No. 62
A) राऊटर(Router) B) टार(Star)
C) WAN D) बस(Bus)
Which network is able to connect to each computer through a common central line?
A) Router B) Star
C) WAN D) Bus
Question No. 63
What is the name of the sources of energy which are being produced continuously in nature
Page - 24
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 64
Question No. 65
Question No. 66
थ मट, बार क ए यम
ू ी नयम पाउडर और आयरन ऑ साइड के _____ वजन के अनप
ु ात का म ण है ।
A) 1 : 2 B) 1 : 3
C) 3 : 1 D) 2 : 1
Page - 25
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Thermit is a mixture of fine aluminium powder and iron oxide in the ratio of about _____ by
weight.
A) 1 : 2 B) 1 : 3
C) 3 : 1 D) 2 : 1
Question No. 67
य द (R) त घंटे गारं ट ड आधार दर है , (S) काय के लए मानक समय है और (T) वा त वक समय है , तो
रोवन योजना के अनस
ु ार, काय के लए पा र मक कतना होगा?
A) TR + [(S - T)/2] × R B) TR
C) TR + [(S - T)/S] × R D) TR + (S - T) × R
If (R) is the base rate guaranteed per hour, (S) is the standard time for the job and (T) is the
actual time, then according to Rowan plan, wages for the job will be-
A) TR + [(S - T)/2] × R B) TR
C) TR + [(S - T)/S] × R D) TR + (S - T) × R
Question No. 68
A) 4.4 B) 2.2
C) 3.3 D) 5.5
A) 4.4 B) 2.2
C) 3.3 D) 5.5
Question No. 69
Page - 26
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
न न ल खत म से कौन सा एंडोथ मक या है ?
A) सख
ू े बफ का ऊ वपातक B) सख
ू े बफ का ऊ वपातक और पानी का वा पीकरण
दोन
Question No. 70
C) बीट ट D) लू बेर ज
Question No. 71
Page - 27
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 72
The compressor performance at higher altitude compared to sea level will be-
Question No. 73
A) भप
ू ेश बघेल B) पेमा खांडू
Who among the following was appointed the Chief Minister of Goa in March 2019?
Question No. 74
A) तीन B) पांच
C) चार D) दो
A) Three B) Five
C) Four D) Two
Page - 28
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 75
A) फेस B) नोस
C) शक D) ह ल
___________ is the intersection of the flank and the base of the tool.
A) Face B) Nose
C) Shank D) Heel
Question No. 76
A) VT0.7 = C B) VT0.5 = C
C) VT0.4 = C D) VT0.3 = C
Find the tool life equation, if a tool life of 80 min is obtained at a cutting speed of 30 m/min and
8 min at 60 m/min.
A) VT0.7 = C B) VT0.5 = C
C) VT0.4 = C D) VT0.3 = C
Question No. 77
A) वै पंग B) ै गमटे शन
C) पेिजंग D) सेगमटे शन
_________ is a memory management scheme that permits the physical address space of a
process to be noncontiguous.
Page - 29
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) Swapping B) Fragmentation
C) Paging D) Segmentation
Question No. 78
A) Tool post size and lathe travel B) Bed length and spindle speed
Question No. 79
अ दल
ु कलाम, कस अव ध के दौरान भारत के रा प त रहे ?
A) 2002–2007 B) 1997–2002
C) 1992–1997 D) 2007–2012
A) 2002–2007 B) 1997–2002
C) 1992–1997 D) 2007–2012
Question No. 80
Page - 30
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 81
A) -56.6° C B) -75.2° C
C) -135.8° C D) -87.7° C
A) -56.6° C B) -75.2° C
C) -135.8° C D) -87.7° C
Question No. 82
C) वायु D) सय
ू
A) Water B) Firewood
C) Air D) Sun
Question No. 83
C) यल
ू इंजे टर D) का यरेु टर
Page - 31
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 84
A) ोजे ट एल फट B) वक प म से सभी
Question No. 85
A) लॉटर B) लेजर ट
ं र
C) इंक-जेट ट
ं र D) लाइन ट
ं र
Question No. 86
A) ि थर दाब B) ि थर आयतन
C) ि थर ताप D) वक प म से सभी
The gas in cooling chamber of a closed cycle gas turbine is cooled at-
Page - 32
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 87
A) ाउज़र B) सच इंजन
C) माउस D) लंक
C) Mouse D) Link
Question No. 88
A) गैलन त यि त B) लोबल हे टे यर
Which among the following is the unit of measurement of the “Ecological Footprint”?
Question No. 89
Page - 33
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 90
A) भज
ु के े फल के तीन गन
ु े B) भज
ु के े फल
C) भज
ु के े फल के आधे D) भज
ु के े फल के दो गुने
Three forces acting on a rigid body are represented in magnitude, direction and line of action by
the three sides of a triangle taken in order. The forces are equivalent to a couple whose
moment is equal to-
C) Half the area of the triangle D) Twice the area of the triangle
Question No. 91
A) टे नलेस टल B) इ वार
C) Silver D) Selenium
Question No. 92
Page - 34
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) वीर (Weir) D) ऑ र फस
____________ is a small opening of any cross section on the side or bottom of the tank on
which fluid is flowing. www.exammix.com
C) Weir D) Orifice
Question No. 93
A) त मलनाडु B) ओ डशा
C) आं दे श D) गुजरात
Question No. 94
पा कल का नयम कहता है क _________ म कसी बंद ु पर लगने वाला दाब सभी दशाओं म बराबर होता
है ।
Pascal's law states that pressure at a point is equal in all directions in a/an-
Page - 35
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question No. 95
सच
ू ी नयं ण (Inventory control)और गुणव ता नयं ण (quality control), उ पादन नयोजन एवं नयं ण
के इनम से कस चरण म शा मल होता है ?
C) पव
ू - नयोजन चरण (Pre-planning stage) D) काय चरण (Action stage)
Inventory control and quality control is involved in which of the following phases of production
planning and control?
Question No. 96
C) ि लप गेज D) लग गेज
Question No. 97
भज
ु ीय भाव क जाँच करने के लए कस V लॉक का योग कया जाता है ?
A) 90 ड ी के कोण वाले V लॉक का योग कया B) 60 ड ी के कोण वाले V लॉक का योग कया
जाता है । जाता है ।
C) 30 ड ी के कोण वाले V लॉक का योग कया D) 120 ड ी के कोण वाले V लॉक का योग
जाता है । कया जाता है ।
Page - 36
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) V block with 90-degree angle is used B) V block with 60-degree angle is used
C) V block with 30-degree angle is used D) V block with 120-degree angle is used
Question No. 98
A) वसरण तापानश
ु ीतन (Diffusion annealing) B) यागत तापानश
ु ीतन (Process annealing)
C) पण
ू तापानश
ु ीतन (Full annealing) D) फेरोडाइज एनी लंग (Spherodise annealing)
Which annealing process is carried out in a heavy casting to make austenitic grains
homogeneous?
Question No. 99
आघण
ू के नयम के अनस
ु ार, य द कसी कण पर काय करने वाले कई समतल य बल संतल
ु न म ह, तो
__________।
According to the law of moments, if a number of coplanar forces acting on a particle are in
equilibrium, then-
A) The algebraic sum of their moments about B) Their algebraic sum is zero
any point in their plane is zero
Page - 37
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) The algebraic sum of their moments about D) Their lines of action are at equal distances
any point is equal to the moment of their
resultant force about the same point
A) 15 mm/A B) 36 mm/A
C) 4 mm/A D) 9 mm/A
An ammeter requires a change of 3A in its coil to produce a change in deflection of the pointer
by 12 mm. Its sensitivity is-
A) 15 mm/A B) 36 mm/A
C) 4 mm/A D) 9 mm/A
एक थै तक व म _________ हो सकता है ।
A) Zero normal stress and non-zero shear B) Non-zero normal stress and non-zero
stress shear stress
C) Negative normal stress and zero shear D) Positive normal stress and non-zero shear
stress stress
Page - 38
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
जब लोड को धीरे -धीरे लागू कया जाता है , एक पंड म सं ह त वकृ त ऊजा (strain energy ) ______ है ।
(जहां σ = पंड के पदाथ म तबल, V = पंड का आयतन, और E = पदाथ का या थता गुणांक)
A) σV/E B) σE/V
C) σ2E/2V D) σ2V/2E
The strain energy stored in a body, when the load is gradually applied, is :
(where σ = Stress in the material of the body, V = Volume of the body, and E = Modulus of
elasticity of the material)
A) σV/E B) σE/V
C) σ2E/2V D) σ2V/2E
एक सम मत से शन (symmetrical section) वाले क ड बीम म अ धकतम बेि डंग तबल हमेशा _______
पर होता है ।
A) इनसाइड फाइबर B) यू ल एि सस
The maximum bending stress in a curved beam having symmetrical section always occurs at
the-
PSLV-C45 को _____ के दस
ू रे लॉ च पैड से े पत कया गया था।
A) अ दल
ु कलाम वीप (Abdul Kalam Island) B) थु बा इ वेटो रयल रॉकेट लॉि चंग टे शन
The PSLV-C45 was launched from the second launch pad of the-
Page - 39
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) सच
ू ी नयं ण (Inventory control) D) गुणव ता नयं ण (Quality control)
Pre-planning stage in production planning and control includes which of the following activities?
A) कांसा B) पीतल
C) ए यम
ू ी नयम D) टे नलेस टल
A) Bronze B) Brass
तरोध वेि डंग म उ प न ऊ मा (H) को ___________ वारा य त कया जाता है । (जहां I = धारा, R
= वे ड होने वाले े का तरोध और t = धारा के वाह का समय)
A) IRt B) I2Rt
C) IR2t D) IRt2
Page - 40
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) IRt B) I2Rt
C) IR2t D) IRt2
A) उ तराखंड B) असम
C) गुजरात D) पंजाब
A) Uttarakhand B) Assam
C) Gujarat D) Punjab
A) यू नफामल ड यट
ू े ड लोड B) अंडर डप डंग लोड
C) अनइवेन ड यट
ू े ड लोड D) यन
ू ाइटे ड ड िजंग लोड
A) जड़ व बल B) वक प म से सभी
Page - 41
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) यान बल D) गु वाकषण बल
A) 1 B) 3
C) 4 D) 2
A) 1 B) 3
C) 4 D) 2
A) उवरक B) कागज़
C) खाद D) साबन
ु
A) Fertilizers B) Papers
C) Manures D) Soaps
Page - 42
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) प (Creep) D) ां त (Fatigue)
Which of the following is a slow rise of plastic deformation under the action of stresses?
C) Creep D) Fatigue
A) यू ज़ीलड B) जापानी
C) को रया D) चीनी
C) Korea D) China
A) फनो लक B) वनाइल
C) ए काइल D) शेलक
A) Phenolic B) Vinyl
C) Alkyl D) Shellac
Page - 43
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
____________ is a beam with one end fixed and the other end simply supported.
A) 50 B) 40
C) 25 D) 15
A) 50 B) 40
C) 25 D) 15
A) र ड कार के तल
ु न (Reed type B) स मा तल
ु न (Sigma comparator)
comparator)
C) व यत
ु तल
ु न (Electric comparator) D) ऑि टकल तल
ु न (Optical comparators)
Page - 44
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
धातओ
ु ं को पीटकर पतल चादर म प रव तत करने के गण
ु को _______ कहा जाता है ।
The metals can be beaten into thin sheets, the property is called _______.
A) Lustre B) Malleability
C) Sonority D) Ductility
A) बय रंग ि लयरस क जांच करने और उसे मापने B) संयु मी भाग के बीच के र त थान क जांच
के लए करने के लए
A) Check and measure the bearing B) Check the gap between the mating parts
clearance
C) Check and set the spark plug gaps D) All of the options
A) 1.0 मल ाम त ल टर B) 1.50 मल ाम त ल टर
C) 1.25 मल ाम त ल टर D) 1.75 मल ाम त ल टर
Page - 45
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) यट
ू ो नयन व (Newtonian fluid) D) बंघम सघ
ु य व (Bingham plastic fluid)
The imaginary line drawn in the fluid in such a way that the tangent to any point gives the
direction of motion at that point, is known as-
A) 101010 B) 100100
C) 101000 D) 100011
A) 101010 B) 100100
Page - 46
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) 101000 D) 100011
W = 20 kN भार वाला एक लॉक, ै तज से 30° के कोण वाले आनत तल पर वरामाव था म रखा गया
है । आनत तल के समानांतर कायरत बल के घटक का मान ात क िजए।
A) 17.32 KN B) 10 KN
C) 14.14 KN D) 5 KN
A block weighing W=20 kN is resting on an inclined plane which makes an angle of 30° to the
horizontal.The component of gravity force parallel to inclined plane is-
A) 17.32 kN B) 10 kN
C) 14.14 kN D) 5 kN
If the line of action of all the forces are along the same line, then the forces are said to be-
A) Al2O3 B) ह रा
Page - 47
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) SiC D) CBN
A) Al2O3 B) Diamond
C) SiC D) CBN
A) By nourishing the nutrients from the soil B) By increasing the nutrients from the soil
C) By balancing the nutrients in the soil D) By limiting nutrients from the soil
A) 45° B) 180°
C) 90° D) 120°
A) 45° B) 180°
C) 90° D) 120°
Page - 48
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) वव रच स B) रची रचडसन
Who was the captain of the West Indies team that was defeated by the Indian Cricket team in
1983 to win the Prudential World Cup?
A) लोहा B) टं ग टन
C) नकल D) ए यम
ू ी नयम
A) Iron B) Tungsten
C) Nickel D) Aluminium
Page - 49
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Which of the following properties is desirable in parts subjected to shock and impact loads?
A) Brittleness B) Strength
C) Toughness D) Stiffness
The process of splitting up of white light into seven constituent colours is called-
A) Dispersion B) Interference
C) Refraction D) Photosynthesis
Page - 50
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) उ च म धातु इ पात D) मद
ृ ु इ पात
A) अपव
ू ानम
ु ेय B) शू य
C) अ धकतम D) एकक
A) Undefined B) Zero
_______ consists of a mixture of clay, feldspar, flint and frit in varying proportions.
Page - 51
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) ि वंग B) सैडल
C) सॉकेट D) ि पंडल
The largest diameter of work that can be carried between the centers of a lathe is known as-
A) Swing B) Saddle
C) Socket D) Spindle
A) इटल B) यन
ू ान
C) मेसोपोटा मया D) म
A) Italy B) Greece
C) Mesopotamia D) Egypt
व व बक का मु यालय कहाँ ि थत है ?
A) बो टन B) फ़लाडेि फया
C) सैन ां स को ं टन, DC
D) वा शग
A) Boston B) Philadelphia
Page - 52
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) ट
ं र B) माउस
A) Printer B) Mouse
C) Scanner D) Interpreter
A) Stress, pressure and modulus of elasticity B) Stress, force and modulus of elasticity
A) कै रज B) कंपाउं ड रे ट
C) सैडल D) टे ल टॉक
__________ is fitted on the top of cross slide and is used to support the tool post and the
cutting tool.
Page - 53
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
C) ल संग के लए D) फॉ मग के लए
C) Lancing D) Forming
ि प रट लेवल को ै तज रखने पर बल
ु बल
ु ा पैमाने पर कहाँ जाकर वरामाव था म आ जाता है ?
C) क म D) तल म
Where does the bubble rest on the scale when spirit level is placed horizontally?
C) Centre D) Bottom
Page - 54
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
A) 175 नग B) 200 नग
C) 150 नग D) 224 नग
An XYZ television supplier found a demand of 200 sets in July, 225 sets in August and 245 sets
in September. Find the demand forecast for the month of October using simple average
method.
A) बट ऑपरे शन B) मै ो ऑपरे शन
A) च तरं जन रे गे B) द पक मेहता
Page - 55
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Who took charge as the Managing Director and CEO of the Multi Commodity Exchange of India
(MCX) in May 2019?
Page - 56