Professional Documents
Culture Documents
JSA 01-Rev.02 - Blasting & Painting
JSA 01-Rev.02 - Blasting & Painting
Ltd
HPCL- Mittal Energy Ltd, GGSR, Bathinda
Note:
1. JSA to be done by issuer and accepter of work permit, in case required, representative from other discipline can also join the team for JSA
JOB SAFETY ANALYSIS FORM
JSA Sheet No._______________
Checklist of common Hazards
This should be used as an aid to identifying hazard. This is the list for the most common hazards but is not a definite list.
Mechanical/Equipment Thermal Ignition sources Electrical
Entanglement Hot surface Electricity Electrical shock
Shearing Steam Static electricity Static electricity
Crushing Refrigerants Hot work Power failure
Striking Stored Energy Lightening Pressure
Cutting Falling material Sparks Release of energy
Mechanical failure (e.g. by overloading) Springs under tension/compression Frictions Implosion
Chemical Counterweights Flames Compressed air
Flammable Radiations Auto ignition Steam
Toxic e.g. ionizing radiation (X-rays) Pyrophoric material Hydraulics
Harmful Place of work Vehicles Process
Irritant Obstructions Fork lift Wrong material
Oxidising Access/egress Tankers Missed steps
Pyrophoric Work at height Reversing vehicles Instrument failure
Corrosive Falling objects Speed Interlocks
Dangerous to environment Slip/trip/fall People Control system failure
Dust explosions Housekeeping Unsafe behavior Alarms
Gases Temperature Human errors Nature
Fumes Ventilation Training/competence Weather
Vapours Confined space Method of work Winds/Storms/lightening
Dusts Hazards of other tasks being done Manual handling (lifting, carrying, pushing
Asphyxiants Simultaneously. and pulling)
Stress/workload
Biological (e.g. legionella) Noise/Vibrations/Hot work
2. JSA to have approvals for Hot Jobs, confined space entry & Work on equipment in service