Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Kimberlite® Chemicals India Private Limited

Value Proposition of Efficient Chemical Working


Paint Additives-Biocide

KanCide 6992
PRODUCT DESCRIPTION
KanCide – 6992 is a broad – spectrum wet-state preservative used to protect a wide range of aqueous industrial based
products from spoilage.

TYPICAL PROPERTIES

• Appearance : Colorless to pale blue / green clear liquid


• Odour : Mild
• Density (200 C) : 1.020-1.032 g/cm3
• Refractive Index (200 C) : 1.3380 – 1.3440
• pH (200 C) : 2.0-3.0
• Solubility : Fully soluble in water, most lower alcohols and glycols
• Stability : Stable in the presence of light, over pH range 2.0-9.0 and temperature
Up to 60˚C.
APPLICATION
KanCide 6992 is suitable for the wet-state preservation of a wide range of aqueous products including paints, polymer
emulsions, adhesives, ceramic glazes, fillers and sealants and as a tank side additive for ready-diluted metalworking fluids.

USE LEVELS
Normal use concentrations are in the range 0.05 – 0.40%, depending on the product to be protected and the environmental
conditions to which it will be exposed. The local Kimberlite Technical Centre can assist in determining the precise concentration
required for specific applications.

METHOD OF USE / COMPATIBILITY

KanCide 6992 can be added at any time during manufacturing. However, it is advised to add it as early as possible to give
protection throughout the production process. Care should be taken to ensure that temperature, pH and redox potential at
the point of addition are suitable for stability of the product.

KanCide 6992 is compatible with most formulations in which its application is recommended. Reducing agents amines and
other strong nucleophiles can cause degradation of the active ingredients. Users are therefore advised to carry out their own
tests or seek further advice from Kimberlite prior to initial application.

STORAGE
The product should not be stored in direct sunlight. If stored at ambient temperatures the product should be used within 12
months from the manufacture date.

HANDLING
Avoid contact with eye or prolonged contact with skin. Do not take internally. In case of contact with skin/eye, wash/flush with
plenty of water and seek immediate medical attention. In case of ingestion, wash mouth thoroughly and drink plenty of water.
Do not induce vomiting and seek medical attention. Avoid extremes of temperature and wear gloves and goggles wherever
appropriate.

A n ISO 9 0 0 1 : 2 0 1 5 C o m p a n y

Kimberlite Chemicals India Private Limited


334, Road No.17, KIADB 3rd Phase, Doddaballapura,
Bangalore-561203, INDIA Phone: +91 8119 350001
E-mail: info@kimberliteindia.com Website: www.kimberlitechemicals.com
Kimberlite® Chemicals India Private Limited
Value Proposition of Efficient Chemical Working
PACKING
KanCide 6992 is available in 30Kg, 50Kg and 200 kgs.

Disclaimer: These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee as conditions
and methods of use of products are beyond our control. We recommend that the prospective user determine the Suitability of our materials and suggestions
before adopting them on a commercial scale.

A n ISO 9 0 0 1 : 2 0 1 5 C o m p a n y

Kimberlite Chemicals India Private Limited


334, Road No.17, KIADB 3rd Phase, Doddaballapura,
Bangalore-561203, INDIA Phone: +91 8119 350001
E-mail: info@kimberliteindia.com Website: www.kimberlitechemicals.com

You might also like