Ang-Cor JHA (Renovation of Comfort Room)

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

JHA Number: ACC001

JOB HAZARD ANALYSIS Revision: N/A Prepared by: Jayson Arellano


Effectivity Date: N/A Date: 08 April, 2024

JOB DESCRIPTION: Renovation of Comfort Room @ Sales JOB TITLE(S) OF PERSON WHO DOES THE JOB:
Director Area Carpenter, Mason, General Labor, Foreman

JOB LOCATION: URC Bagong Ilog Pasig COMPANY/DEPARTMENT: Ang-Cor Construction

REQUIRED PPE FOR:


Head Face Foot Respiratory Others, please specify
Eye Body Hand Hearing ______________________________________________________________________

PROPOSED ACTIONS
BASIC JOB STEPS POTENTIAL HAZARDS EFFECTS
OR PROCEDURES
* All personnel must undergo
Safety Orientation conducted by
Unfamiliar with Work Area Bodily injuries the LRMC
* Conduct familiarization of the
area.
* Drivers to comply with traffic
Vehicle Malfunction, Collision Burns, Property Damage
rules and regulations.
Mobilization/Delivery of Materials
Miscommunication Work delay; Property Damage Conduct toolbox meetings
* Identify possible hazard
locations during TBM.
* Wear proper PPE, eg. hand
Pinch Points / Sharp Edges Minor Cuts, Hand Injuries
gloves.
* Cover sharp edges with
padding.
Cut/poked by sharp object/edges Injury Awareness in the surroundings
* Load being carried by a single
person should not exceed 25kg.
* Work in buddy system to carry
Ergonomics Sprains, Muscle Disorders load or seek alternative methods
to carry heavier loads.
* Ensure proper lifting posture
during manual handling.
Eye strain; Injury; Property Provide adequate lighting as
Inadequate illumination
damage needed
Unprotected Hand Hand Abrasion and Splinter * Use hand gloves
*Ensure that all affected
convenient outlets are properly
covered or disconnected before
Masonry & Tile Works
starting any activity
* Ensure fixtures are in good
Electrocution Burns, shock condition and are'nt faulty.
*Check all electrical wirings
located at wall and flooring for
any abbrasions before and after
installation to prevent any
accidents.

Exposure to conductive material Electric shock Wear appropriate PPE

* Ensure that elevated platforms


in use are properly set-up to
Fall from height; Bodily injury;
Using Elevated Platforms prevent tripping.
Fatality
*Use full body harness whenever
necessary.

Page 1 of 1

You might also like