Professional Documents
Culture Documents
Benedetto 17
Benedetto 17
Benedetto 17
7
Veneer 1.0 x 2.0 (3) 1.0 x 2.0 (2) 1 9/16" 19 5/16"
Side
W
1.52 x 3.4
3/16"
W
4.8
W 6.7 6.7 6.7 6.7 6.7
BWBW Headpiece 2.29 x 6.35 W Fretboard 1/4" 1/4" 1/4" 1/4" 1/4"
2.29 x 6.35 Top Top
1.0 x 2.0 (2) Wood 2.29 x 6.35
Note: Dimensions For Head and Plate BW Plate
Fretboard Are Based On These BW
1.0 x 2.0 (1) 1.0 x 2.0 (1) BW
Elements Being Flat On the X/Y
11/32"
1.0 x 2.0 (1)
5/16"
Plane And There Is Not Any
9.1
8.1
Compensation For The Neck & 9/32" 9/32" Carved Spruce Top-Refer
Side Maple To Plate Contour Map and
Headpiece Angle BWBWBW 7.4 7.0 ABS Plastic Binding:
Neck Wood 5/16" 7.6 7.2 Plate Sections For Profiles
1.0 x 2.0 (3) 4.0 7.9 9/32" 3.5 2.29mm x 6.35 W/ BW
5/32" 5/16" 1/8" Purfling On Bottom "F" Hole Purfling:
Also, The Headpiece Design Is Refer To Binding Detail White: 1.52mm x 6mm
The Mark Of Each Individual
Back Plate/Side Headpiece Top Plate/Side Fretboard Black: 0.5mm x 6mm
Nut Details
Builder. This Illustration Shows White: 0.5mm x 6mm
The Typical Benedetto Headpiece.
You Should Design Your Own
Binding/Purfling Binding/Purfling Binding/Purfling Binding/Purfling Miter All Joints Of F-Hole
Unique Headpiece Scale - 4x Actual Size Scale - 4x Actual Size Scale - 4x Actual Size Scale - 4x Actual Size Purflings
All Dimensions in Millimeters All Dimensions in Millimeters All Dimensions in Millimeters All Dimensions in Millimeters
Place Your "Brand" Here. Take
Some Sketch Paper and Design
Carved Spruce Top-Refer
Your "Own Brand" and be
8.016"
To Plate Contour Map and
5/
Uniquely Different.
Plate Sections For Profiles
8 17/32"
221.8
216.4
8 23/32"
161.9
Dashed Lines Indicate Spruce
6 3/8"
Detail.
41.6 41.5 Or Mahogany Tail Block
1 5/8" 1 5/8"
Alternate Brace Location
Indian Rosewood or Ebony Fretboard
129.9
71.8
5 1/8"
1/4" (6.35mm) Thick at Center w/ 12" 2 13/16" Wood Finger Rest. See Finger Rest
Truss Rod Cover. Multi-layer ABS Plastic (304.8mm) Fretboard Radius Details For Dimension And Optional
8.0
5/16"
With Beveled Edge Electronic Controls For Pickup.
Typical Frets are Nickel/Silver Dashed Lines Indicate Mahogany
Bleached Bone Nut Refer To Nut Details Head Block w/Dovetail Neck Joint
Bead = .106" (2.7mm) Wide x
.044" (1.12mm) Hign. At Interior of Guitar. Note: Consider
9/32"
6.9
2 9/32"
57.6
1/8"
3.4
0"
3
9/32"7.2 9/32"
7.0
1 1/32"
25.9
9/32"
Binding: 3.4mm x 1.52mm
10 17/32"
1 13/32"
1 31/32"
1 25/32"
4 11/32"
2 9/32"
2 5/32"
2 3/32"
Purfling: 3 7/32"
101.9
Typical Handmade Ebony
267.2
35.5
110.4
1 3/4"
76.2
58.3
55.0
52.8
50.0
45.5
44.4
82.0
7.4
Black: 0.5mm x 2.0mm Tailpiece. Refer To Details
3"
4"
7.9 5/16"
White: 0.5mm x 2.0mm
7.6
2 31/32"
1 1/32"
75.6
5/16"
White: 0.5mm x 2.0mm
5/32"
0"
2 5/16"
3
4.0
58.9
Fretboard Position Markers - Typical Benedetto
9/32"
6.9
5/16"
8.0
ABS Plastic Fretboard Binding:
Note: This Drawing Shows the Traditional Benedetto Binding: 2.29mm x 6.35mm
5 3/16"
131.8
Peghead Shape for Reference Only. Purfling: Alternate Brace Location
You Should Design Your Own Shape to Make This Black: 0.5mm x 2.0mm
1.0mm Headpiece Veneer Instrument Unique and Not Copy Other Copyrighted White: 0.5mm x 2.0mm X-Tone Brace @ Top Plate 25.6
162.3
Shapes 1"
6 3/8"
Stained Black w/ Plastic Black: 0.5mm x 2.0mm 44.5 Spruce. Refer To Brace
Binding/Purfling Trim. Refer White: 0.5mm x 2.0mm 180 Detail.
1 3/4" .0
To Detail
73
/32 Dark Shaded Area Indicates
" Bone Nut Section To Be Installed
179.0 In Place of Binding & Purfling For
7 1/32" Tailpiece Tail Adjuster
216.0
8 1/2"
32.9 76.2 Ebony Bridge Base. Shape Tightly
156.6 1 9/32" 3" To Guitar Top. Carved Spruce Top-Refer
6 5/32" To Plate Contour Map and
22.2 17.0 65.0
9/32"
Ebony Tailpiece Round 6.7 7/8" 21/32" 2 9/16" Plated Thumbwheel Set. Set Loose
1.5 14.1 9/32"
Top w/ 12" Radius 1/4"
1/16" In Bridge Base. Secure Top Top
3/32"
9/16" 2.3
Double Adj. Nuts Section of Bridge.
4.8
9/32" 1.2
String Attachment Bridge is Higher At Base Side. This Outer Line Indicates Extents
ABS Plastic Binding:
15/32"
10.8
1/16" 11/32" 5/32" 7/16"
Reliefs In Top and Sides 2.29mm x 6.35 W/ BW Is Installed Starting At This Point Carved Spruce Top-Refer
Fulcrum Purfling On Bottom
of Tailpiece. Refer Top To Plate Contour Map and
3/16"
3.7
Information
Adjuster Cavity Sacconi Tail Adjuster 15.8
1.8 8.4
1.8 8.4
9/32"
7.4
19/32"
530.8
15.3
20 29/32"
1 11/32"
2 25/32"
7/32"
12.7
34.3
71.0
5.3
1/2"
15.9
Adjustable Compensated
5/8"
Bridge Details
3/16"
5.0
2.4
41. 5 8"
To Plate Contour Map and
1 5/ Plate Sections For Profiles ABS Plastic Binding:
14.6
9/16"
2.29mm x 6.35 W/ BW
2 31/32"
14.56"
9/1
41. 5
/8"
75.7 Side Plates: Maple 3/32" Thick Purfling On Bottom
15 (2.4mm) Consider Figured Refer To Binding Detail
14.10° ABS Plastic Fretboard Binding:
Note That Headpiece Tapers Dashed Lines Indicate Neck Slot Wood Such As Birds-Eye
From 12.7mm To 14.5mm Binding: 2.29mm x 6.35mm For Dual Action Adjustable Truss Or Curly Maple. Back & Side
Purfling: Rod. Wood Must Match.
Neck Section
2.5 2.0 41.0 2.0 2.5 2.5 2.0 46.0 2.0 2.5
Nut Details Carved Maple Guitar Back Plate.
1/32"
1/32"
3/32" 3/32" 1 5/8" 3/32" 3/32" 3/32" 3/32" 1 13/16" 3/32" 3/32"
1/4"
7/32"1.0
7/32"1.0
6.4
Ebony or East Indian Ebony or East Indian Birds-Eye Maple or Curly Maple
1/2
Binding: 3.4mm x 1.52mm 3+3 - Perloid Keystone BTN - Tuners - Nickel or Gold Rosewood Fretboard Rosewood Fretboard
1/32"
1/32"
1/32"
15/32"
1.0
1.0
1.0
Purfling: Finish.
Black: 0.5mm x 3.4mm
White: 0.5mm x 3.4mm Note: This Drawing Shows the Traditional Benedetto Two-way Adjustable Two-way Adjustable
Truss Rod Truss Rod
14.6
21/32"
11/16"
17.8
White: 0.5mm x 3.4mm You Should Design Your Own Shape to Make This
Instrument Unique and Not Copy Other Copyrighted 5.5
7/32"
Shapes
R 304.8 R 304.2