S PRIME REVIEW ONLINE
"MECHANICAL ENGINEERING REVIEW.
aa
PROPERTIES OF AIR
1. Calculate the specific volume of an ait-vapor mixture
in cubic meters per kilogram of dry air when the
following conditions prevail: t= 30°C, » = 0.015,
kgikg, and P; = 90 kPa
A. 0.69 Vk C.0.79 mike.
B. 0.89 mvkgs D.0.99 mks
A4mx4.mx4 m room has a relative humidity ratio
of 80%. The pressure in the room is 120 kPa and.
temperature is 35C ( Psat = 5.628). What is the mass
of vapor in the room. Use Rvagw = 0.4615 kN-mvkg-
K
A. 2.03 kgy C. 3.03 kev
B. 5.03 kgv D. 1.03 kev
AIR MIXING
3. The mass of an outside air at SO°C in an ait
conditioning unit is 60 kg. Pind the temperature after
mixing if the outside air mixed with 40 kg with
recirculated air at 35°C.
A. 35°C
B. 65°C
c.4a°e
D.35C
4, In an air conditioning system, if the re-circulated air
is three times the outside air and the mass of supply
air is 20 kg’s, what is the mass of the outside air?
A. Skuis C.Gkels
B. 5.5 kgis D.Okgis
HEAT LOADS
5. A room being air conditioned is being held at 25°C
dry bulb and 50% relative humidity,/A. flow rate of 5
m/s of supply air at 15°C dry bulb aid 80% RH is
being delivered to the room to maintain that steady.
condition at 100 kPa, What is the sensible heat
absorbed fiom the room air in kW?
A. 60.5 kW C. 60.5 nP
B. 88 kW D.214.2kW
6, Ifthe latent and sensible heat loads are 20 kW and 80
KW respectively, what is the sensible heat ratio?
Al Ce
B. OS D.08
7. In.an auditorium maintained at a temperature not to
exceed 24°C and relative humidity not to exceed
660%, a sensible heat load of 132 kW and 78 kg of
moisture per hour to be removed, Airis supplied to
the auditorium at 18°C. How many kilograms of air
‘must be supplied per hour?
A. 79200 keyhr C.97200 ka/he
B. 79002 kghhr D. 72900 kg/hr
POWER & INDUSTRIAL PLANT ENGINEERING
‘wor primereviewcentercomm
COOLING TOWER
8. Determine the approximate load on a cooling tower
if the entering and leaving temperatures are 96°F and
88°F, respectively and the flow rate of the water over
the tower is 30 gpm.
A. 2000 kW
B. 2000 hP
€. 2000 BTU/min
D. 2000 BUT/s
9. The natural draft cooling tower has a 400 ton heat
rejection load. The temperature of the water entering,
the cooling tower is 90°F and leaving at 82°F.
‘Compute the approach, range and cooling tower
efficiency when the outdoor wet-bulb temperature is
IS,
B. R=8°C, A=8°C,
C.R=7C,A=7Ce
D. R=7'C,A
DUCTING & DRYER
10. A rectangular duct has a dimension of 0.25 m by 1
m, Determine the equivalent diameter of the duct.
A 05m C.045 m
B.04m D.0.55m
11, Copra enters a dryer containing 60% water and 40%
of solids and feaves with $% water and 95% solids
Find the weight of water removed based on each
pound of original product.
‘A. 0.85 Ib €.0.58 Ib
B_0241b D.0.42 Ib
12, Copra enters a dryer containing 60% water and 40%
of solids and leaves with 5% water and 95% solids.
Find the weight of water removed based on each
pound of origital product.
C. 085 Ib C058 Ib
D. 0.24 1b D.0.42 Ib
FACTORS (BY-PASS & CONTACT) AND BLEED-OFF
13, A-coil has an inlet temperature of 60°F and outlet of
90°F. If the mean tempeature of the coil is 100°F,
find the bypass factor of the coil
A. 0.60 €.030
B. 052 D.0.40
14, A coil has an inlet temperature of 60°F and outlet of
90°F. If the mean tempeature of the coil is 100°F,
find the contact factor of the coil
A. 0.60 c.030
B. 052 D.0.40
15, Determine the quantity of water lost by bleed off if
the water flow rate over the tower is 30 gpm and the
range is 10°F, Percent bleed-off required is 33%
A. 0.099 gpm €..0.019 gpm
B_ 0.010 gpm 1D. 0.089 gpm
Please log-on to wivw.primerevieweenter.com for the
enhancement of Elements(Terms) in Mathematics &
Basic Engineering Sciences, Power & Industrial Plant
Engineering and Machine Design,