Professional Documents
Culture Documents
HMC 311 SC 70
HMC 311 SC 70
v05.0517
Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
1 license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC311SC70 / 311SC70E
v05.0517
15 18
5 14
GAIN (dB)
0
12
-5
10
-10
8
-15
6
-20
-25 4
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8
Input Return Loss vs. Temperature Output Return Loss vs. Temperature
0 0
-5
RETURN LOSS (dB)
-5
RETURN LOSS (dB)
-10 -10
-15 -15
-20 -20
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
FREQUENCY (GHz) FREQUENCY (GHz)
-5 8
NOISE FIGURE (dB)
-10 6
-15 4
-20 2
-25 0
0 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
FREQUENCY (GHz) FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D 2
HMC311SC70 / 311SC70E
v05.0517
16 16
P1dB (dBm)
Psat (dBm)
12 12
8 8
4 4
0 0
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
FREQUENCY (GHz) FREQUENCY (GHz)
14 14
12 12
10 10
8 8
6 6
4 4
2 2
0 0
-2 -2
-4 -4
-20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6
INPUT POWER (dBm) INPUT POWER (dBm)
40 80
32
30 35
28
30 60
26
IP3 (dBm)
24 25
Icq (mA)
22
20 40
20
18 15
16
10 20
14
12 5
10
0 0
0 1 2 3 4 5 6 7 8
4.5 4.75 5 5.25 5.5
FREQUENCY (GHz) Vs (V)
Icq
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
3 Application Support: Phone: 1-800-ANALOG-D
HMC311SC70 / 311SC70E
v05.0517
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD MATERIAL: COPPER ALLOY
3. LEAD PLATING: Sn/Pb
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[1]
HMC311SC70 Low Stress Injection Molded Plastic Sn/Pb MSL1 311
[2]
HMC311SC70E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 311E
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D 4
HMC311SC70 / 311SC70E
v05.0517
Pin Descriptions
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
Application Circuit
Note:
1. Select Rbias to achieve Icq using equation below,
Rbias > 22 Ohm.
2. External blocking capacitors are required on
RFIN and RFOUT.
Icq = Vs - 3.8
Rbias
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
5 Application Support: Phone: 1-800-ANALOG-D
HMC311SC70 / 311SC70E
v05.0517
Evaluation PCB
Item Description The circuit board used in the final application should
J1 - J2 PCB Mount SMA Connector use RF circuit design techniques. Signal lines
J3 - J4 DC Pin should have 50 Ohm impedance while the package
C1 - C3 100 pF Capacitor, 0402 Pkg. ground leads should be connected directly to the
C4 1000 pF Capacitor, 0603 Pkg. ground plane similar to that shown. A sufficient
C5 2.2 µF Capacitor, Tantalum
number of via holes should be used to connect
R1 22 Ohm Resistor, 1210 Pkg.
the top and bottom ground planes. The evaluation
L1 22 nH Inductor, 0603 Pkg.
board should be mounted to an appropriate heat
U1 HMC311SC70 / HMC311SC70E
sink. The evaluation circuit board shown is available
PCB [2] 117360 Evaluation PCB
from Analog Devices upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D 6