Download as pdf or txt
Download as pdf or txt
You are on page 1of 112

B. Approach 2 will finish the task in less time than approach 1.

C. Both the approaches will be comparable.

D. Both the approaches will be comparable if there is only 1 worker available.

E. None of these

BDM
Number of Questions : 33

Section Marks : 120

Question Number : 156 Question Type : MCQ

Correct Marks : 0

Question Label : Multiple Choice Question

Options :

A. YES

B. NO

Question Number : 157 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question


Page 154 of 340
Which of the following is not a source of survey data? (select all that is applicable)

Options :

A. Stock market data

B. Market research data

C. Consumer pyramid data

D. None of these

Question Number : 158 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Options :

A. The new quantity must be approximately 0.1 times the old quantity

B. The new quantity must be approximately 60% of the old quantity

C. The increase in quantity must be approximately 3.6 times the old quantity

D. The percentage change in quantity must be approximately 60%

Question Number : 159 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

An increase in Malolan’s income decreases his demand for chocolate milk. Then, for Malolan,
chocolate milk is

Options :

A. A complement to any good

B. A normal good

C. An inferior good

D. A substitute to any good

Page 155 of 340


Question Number : 160 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Which of the following is not a product of the FMCG industry?

Options :

A. Toothpaste

B. Biscuits

C. Corn flakes

D. Soap

E. None of these

Question Number : 161 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Match the following:

Options :

A. 1 – b, 2 – c, 3 – a

B. 1 – a, 2 – b, 3 – c

C. 1 – b, 2 – a, 3 – c

D. 1 – a, 2 – c, 3 – b

Question Number : 162 Question Type : MCQ

Correct Marks : 2
Page 156 of 340
Question Label : Multiple Choice Question

Match the following:

Options :

A. 1 – c, 2 – d, 3 – b, 4 – a

B. 1 – a, 2 – d, 3 – b, 4 – c

C. 1 – d, 2 – c, 3 – b, 4 – a

D. 1 – b, 2 – d, 3 – c, 4 – a

Question Number : 163 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

In designing a ledger for the e-commerce analysis, can the Open Stock of Mother DC be negative
when we accept backorders?

Options :

A. TRUE

B. FALSE

Question Number : 164 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Which of the following is NOT true about the Pareto Principle?

Options :

A. It helps to identify top root causes.


Page 157 of 340
B. Helps to prioritize the top issue for a problem and try to eliminate it first.

C. Gives an idea of the cumulative impact of issues

D. It can be applied to all cases.

Question Number : 165 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

In which e-commerce category would you place Flipkart.in?

Options :

A. Platform

B. Speciality

C. Niche

D. Consumer 2 Consumer

Question Number : 166 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Increase in which of the following items reduces the Gross Margin?

a. Sales
b. Direct Material Cost
c. Direct Labour Cost
d. Shipping Cost
e. Tax on the Manufactured Product

Options :

A. a, b, and c only

B. a, b, c, and e only

C. b, c, and d only

D. all of these Page 158 of 340


Question Number : 167 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Enterprise Resource Planning (ERP) enables integration of which of the following domains

a) Sales and Marketing


b) Operations
c) Human Resources
d) Logistics

Options :

A. a and b only

B. a, b, and c only

C. b, c, and d only

D. all of these

Question Number : 168 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

What are the components of Overall Equipment Effectiveness (OEE)?

a) availability,
b) effectiveness,
c) performance,
d) excellence,
e) objectivity,
f) quality

Options :

A. Objectivity, effectiveness, and Excellence


Page 159 of 340
B. Objectivity, Performance, and Quality
C. Availability, effectiveness, and Quality

D. Availability, Performance, and Quality

Question Number : 169 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Match the Following

Options :

A. a – 1, b – 2, c – 3

B. a – 1,2, b – 1, c – 3

C. a – 1, 3, b – 1, c – 2

D. a – 2, b – 1, c – 3

Question Type : COMPREHENSION

Question Numbers : (170 to 171)

Question Label : Comprehension

A product is sold in a competitive market where its price is fixed at Rs. 13 per unit. If the product is
to be made, a fixed cost of Rs. 12 is incurred. Additionally, based on the volume, the cost per unit
is different and this is provided in Table-1 below. Given this information, answer the subquestions

Page 160 of 340


Sub questions

Question Number : 170 Question Type : MCQ

Correct Marks : 6

Question Label : Multiple Choice Question

Using the Figure-1 and Table-2 given, match the curve in “column-A” to what it correctly
“represents” in column-B

Page 161 of 340


Options :

A. I-(A), II-(C), III-(D)

B. I-(C), II-(A), III-(B)

C. I-(D), II-(C), III-(B)

D. I-(A), II-(C), III-(B)

Question Number : 171 Question Type : SA

Correct Marks : 3
Page 162 of 340
Question Label : Short Answer Question

Upto what number of units can a company that aims to produce the product at given in the main
question mentioned cost structure go? (answer with a number provided in the “Number of Units
Produced (units)” column in Table-1)

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

32

Question Number : 172 Question Type : MCQ

Correct Marks : 3

Question Label : Multiple Choice Question

When computing price elasticity, the slope of the demand curve depends on

Options :

A. The units used to measure quantity but not the units used to measure price

B. The units used to measure quantity and the units used to measure price

C. The units used to measure price but not the units used to measure quantity

D. Neither the units used to measure quantity nor the units used to measure price

Question Number : 173 Question Type : MCQ

Correct Marks : 3

Question Label : Multiple Choice Question

From the table, calculate the revenue growth on 12 September 2022 with respect to 11 Sep 2022
and select the closest option given below.

Page 163 of 340


Options :

A. 5%

B. -7%

C. 4%

D. -3%

Question Number : 174 Question Type : MCQ

Correct Marks : 3

Question Label : Multiple Choice Question

Which of the following principles are widely used in propensity models?

Options :

A. Microeconomics

B. Macroeconomics

C. Nudge economics

D. Working capital

E. Credit economics

Question Number : 175 Question Type : MCQ

Correct Marks : 3

Question Label : Multiple Choice Question Page 164 of 340


Which of the following describes A/B test?

Options :

A. 2 small counties in the US shown 2 different layouts of a website to browse

B. Entire US shown 2 different layouts of a website to browse

C. US is shown one version of the website and UK is shown another version of the website to
browse

D. Both US and UK are shown both the versions of the website to the same people one after the
other

E. All of these

Question Number : 176 Question Type : MCQ

Correct Marks : 3

Question Label : Multiple Choice Question

If a FinTech company wants to cut down losses, which of the following should they do?

Options :

A. Increase approval cutoff of credit score

B. Decrease approval cutoff of credit score

C. Increase interest rate

D. Increase approval limit for loans

E. Give more loans

Question Number : 177 Question Type : MCQ

Correct Marks : 3

Question Label : Multiple Choice Question

What correctly describes Nudge Economics?

Options :

A. Forcing a customer to buy something by constant nagging and notifications

B. positive reinforcement and indirect suggestions as ways to influence the behaviour and
Page 165 of 340
decision-making of groups or individuals.

C. Giving out free merchandise

D. Enabling Credit for smaller values based on the credit score

Question Number : 178 Question Type : MSQ

Correct Marks : 3

Question Label : Multiple Select Question

If the current ratio is 2:1 and the Quick ratio is 1.5:1, then which of the following is/are true? (Select
all that are applicable)

Options :

A. Current assets are 2 times the liability

B. Stocks is 0.5 times the liability

C. Current assets are greater than stocks

D. None of these

Question Number : 179 Question Type : MSQ

Correct Marks : 2

Question Label : Multiple Select Question

Which of the following is/are not a “head” in which an Industry is classified in the Indian context?
(Multiple Select)

Options :

A. Labour

B. Raw Material

C. Ownership

D. Agro based

E. Consumer

Question Number : 180 Question Type : MSQ


Page 166 of 340
Correct Marks : 2

Question Label : Multiple Select Question

Which of the following options is/are correct? (Multiple Select)

If you increase the production volume:

Options :

A. The capacity utilization is increased

B. The capacity utilization is decreased

C. ROCE is decreased

D. ROCE is increased

Question Number : 181 Question Type : SA

Correct Marks : 4

Question Label : Short Answer Question

Calculate the concentration ratio for first four firms for the following industry data:

Hint: (round off to two decimal and enter answer with ‘%’ symbol)
Herfindahl index: 2231 (round off to integer value)

Response Type : Alphanumeric

Evaluation Required For SA : Yes

Show Word Count : Yes Page 167 of 340


Answers Type : Set

Answers Case Sensitive : No

Text Areas : PlainText

Possible Answers :

90.91%

90.91 %

Question Number : 182 Question Type : MCQ

Correct Marks : 6

Question Label : Multiple Choice Question

Match the following.

Options :

A. 1: e; 2: a; 3: d; 4: f; 5: c; 6: b.

B. 1: b; 2: a; 3: d; 4: f; 5: c; 6: e.

C. 1: a; 2: e; 3: d; 4: f; 5: c; 6: b.

D. 1: d; 2: a; 3: e; 4: f; 5: c; 6: b.

Question Number : 183 Question Type : MCQ

Page 168 of 340


Correct Marks : 6

Question Label : Multiple Choice Question

Calculate the OEE of the Gear Manufacturing Equipment

Options :

A. 0.79

B. 0.69

C. 0.90

D. Insufficient Information

Question Number : 184 Question Type : MCQ

Correct Marks : 6

Question Label : Multiple Choice Question

A customer makes a transaction through an online payments platform ‘PayTM’ using ‘ICICI Bank
Credit Card’ in Flipkart to buy a shoe. Which of the following is true chronologically?

Options :

A. Customer pays ICICI, ICICI pays Flipkart

B. Customer pays ICICI, ICICI pays PayTM, PayTM pays Flipkart

C. ICICI pays PayTM, PayTM pays Flipkart, Customer pays ICICI

D. Customer pays PayTM, PayTM pays ICICI, ICICI pays Flipkart


Page 169 of 340
E. Customer pays Flipkart

Question Type : COMPREHENSION

Question Numbers : (185 to 188)

Question Label : Comprehension

Find the missing details (A,B,C,D) in the following table by using Inventory Movement and Sales
Data

Page 170 of 340


Based on the above data, answer the given subquestions.

Sub questions

Question Number : 185 Question Type : SA

Page 171 of 340


Correct Marks : 3

Question Label : Short Answer Question

Enter the correct answer for A: __________

NOTE: Enter your answer to the nearest integer.

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

1230

Question Number : 186 Question Type : SA

Correct Marks : 3

Question Label : Short Answer Question

Enter the correct answer for B: __________

NOTE: Enter your answer to the nearest integer.

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

2652

Question Number : 187 Question Type : SA

Correct Marks : 3 Page 172 of 340


Question Label : Short Answer Question

Enter the correct answer for C:__________

NOTE: Enter your answer to the nearest integer.

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

12000

Question Number : 188 Question Type : SA

Correct Marks : 3

Question Label : Short Answer Question

Enter the correct answer for D:_________

NOTE: Enter your answer to the nearest integer.

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

6606

Question Number : 189 Question Type : MCQ

Correct Marks : 4
Page 173 of 340
Question Label : Multiple Choice Question

When arranging the type of plans in descending order, their duration of the plan (in terms of
time), Which of the following sequence is more appropriate for low technology and quick set up
factory operation ?

Options :

A. Strategic Plan – Capacity Requirement Plan – Purchase Plan – Production Plan – Shift
Operation Plan

B. Shift Operation Plan – Production Plan – Purchase Plan – Capacity Requirement Plan –
Strategic Plan

C. Shift Operation Plan – Production Plan – Purchase Plan – Strategic Plan - Capacity
Requirement Plan

D. Shift Operation Plan – Purchase Plan – Production Plan – Capacity Requirement Plan –
Strategic Plan

Question Number : 190 Question Type : MCQ

Correct Marks : 8

Question Label : Multiple Choice Question

Options :

A. Partha > Akanksha > Lavanya > Siva

B. Akanksha > Lavanya > Siva> Partha

C. Partha < Akanksha < Lavanya < Siva

D. Akanksha < Lavanya < Siva< Partha


Page 174 of 340
Question Type : COMPREHENSION

Question Numbers : (191 to 194)

Question Label : Comprehension

Match the following

Based on the above data, answer the given subquestions.

Sub questions

Question Number : 191 Question Type : MCQ

Correct Marks : 1.5

Question Label : Multiple Choice Question

Select the correct answer for 1:

Options :

A. a

B. b

C. c

D. d

Question Number : 192 Question Type : MCQ


Page 175 of 340
Correct Marks : 1.5

Question Label : Multiple Choice Question

Select the correct answer for 2:

Options :

A. a

B. b

C. c

D. d

Question Number : 193 Question Type : MCQ

Correct Marks : 1.5

Question Label : Multiple Choice Question

Select the correct answer for 3:

Options :

A. a

B. b

C. c

D. d

Question Number : 194 Question Type : MCQ

Correct Marks : 1.5

Question Label : Multiple Choice Question

Select the correct answer for 4:

Options :

A. a

B. b

C. c

D. d
Page 176 of 340
Question Type : COMPREHENSION

Question Numbers : (195 to 198)

Question Label : Comprehension

In the table below, the first column shows the operation to be performed on an Excel spreadsheet
while the second column shows some excel feature. Match these two columns:

Based on the above data, answer the given subquestions.

Sub questions

Question Number : 195 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Select the correct answer for a:

Options :

A. i

B. ii

C. iii

D. iv

Page 177 of 340


Question Number : 196 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Select the correct answer for b:

Options :

A. i

B. ii

C. iii

D. iv

Question Number : 197 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Select the correct answer for c:

Options :

A. i

B. ii

C. iii

D. iv

Question Number : 198 Question Type : MCQ

Correct Marks : 2

Question Label : Multiple Choice Question

Select the correct answer for d:

Options :

A. i

B. ii
Page 178 of 340
C. iii
D. iv

Business Analytics
Number of Questions : 26

Section Marks : 110

Question Number : 199 Question Type : MCQ

Correct Marks : 0

Question Label : Multiple Choice Question

Options :

A. YES

B. NO

Question Number : 200 Question Type : MCQ

Correct Marks : 1

Question Label : Multiple Choice Question

Suppose you conduct a chi-squared test of independence on the categorical variables cities and
brand preferences at the significance level of 0.05. You obtain a p-value of 0.03. What will you
conclude?

Options : Page 179 of 340


6406531183711.

6406531183712.

6406531183713.

Question Number : 95 Question Id : 640653357092 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2

Question Label : Short Answer Question

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

BDM
Section Id : 64065322340

Section Number : 5

Section type : Online

Mandatory or Optional : Mandatory

Number of Questions : 29
Number of Questions to be attempted : 29

Section Marks : 40

Display Number Panel : Yes

Group All Questions : No

Enable Mark as Answered Mark for Review and


Yes
Clear Response :

Maximum Instruction Time : 0

Sub-Section Number : 1

Sub-Section Id : 64065351798

Question Shuffling Allowed : No

Question Number : 96 Question Id : 640653357098 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 0

Question Label : Multiple Choice Question

Options :

6406531183729. Yes

6406531183730. No

Sub-Section Number : 2

Sub-Section Id : 64065351799

Question Shuffling Allowed : Yes

Question Number : 97 Question Id : 640653357103 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0
Correct Marks : 1

Question Label : Multiple Choice Question

A good with a horizontal demand curve has a demand

Options :

6406531183740. With an income elasticity of demand as 0

6406531183741. With a price elasticity of demand as infinity

6406531183742. For which there are no substitute

6406531183743. With a price elasticity of demand as 0

Question Number : 98 Question Id : 640653357104 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which of the following graphs shows the correct relationship between a firm’s average total cost
and average variable cost curves?

Options :

6406531183744.
6406531183745.

6406531183746.

6406531183747.

Question Number : 99 Question Id : 640653357114 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Given the below figure on the relationship between price, supply and demand, what are the
equilibrium price, surplus price and shortage price respectively?
Options :

6406531183764. Rs. 33, Rs. 40 and Rs. 50

6406531183765. Rs. 33, Rs. 50 and Rs. 40

6406531183766. Rs. 280, Rs. 300 and Rs. 200

6406531183767. Rs. 280, Rs. 200 and Rs. 300

Question Number : 100 Question Id : 640653357115 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

With the following data, figure out which SKU has the maximum Average Days of Inventory
Options :

6406531183768. F01

6406531183769. F02

6406531183770. F03

6406531183771. F04

Question Number : 101 Question Id : 640653357116 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

From the table, calculate the revenue growth on 8th July 2022 with respect to 7th July 2022 and
select the closest option given below.
Options :

6406531183772. 3%

6406531183773. -3%

6406531183774. 1%

6406531183775. 0%

Question Number : 102 Question Id : 640653357117 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Pareto chart does not identify ____________.

Options :

6406531183776. The Products which contribute to all of the company’s revenue and sales
volumes

6406531183777. The Products which do not contribute at all towards the revenue and sales

6406531183778. Company’s best performing Products

6406531183779. Future Trends


Question Number : 103 Question Id : 640653357118 Question Type : MCQ Is Question
Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Match the following.

Options :

6406531183780. 1: c; 2: a; 3: b; 4: d

6406531183781. 1: c; 2: b; 3: a; 4: d

6406531183782. 1: a; 2: c; 3: b; 4: d

6406531183783. 1: d; 2: a; 3: c; 4: b

Question Number : 104 Question Id : 640653357126 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

When arranging the type of plans in ascending order, their duration of the plan (in terms of Time),
Which of the following sequence is more appropriate for low technology and quick set up factory
operation?

Options :

6406531183809. Strategic Plan – Capacity Requirement Plan – Purchase Plan – Production Plan –
Shift Operation Plan

6406531183810. Shift Operation Plan – Production Plan – Purchase Plan – Capacity Requirement
Plan – Strategic Plan

6406531183811. Shift Operation Plan – Production Plan – Purchase Plan – Strategic Plan -
Capacity Requirement Plan

6406531183812. Shift Operation Plan – Purchase Plan – Production Plan – Capacity Requirement
Plan – Strategic Plan

Question Number : 105 Question Id : 640653357127 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

The graph below indicates which of the following

Options :

6406531183813. Order Quantity is constant between Mar-19 and Jan-20

6406531183814. Order Quantity follows production issues

6406531183815. Order Quantity is likely to be influenced by existing inventory

6406531183816. No meaningful conclusion can be arrived from the graph

Question Number : 106 Question Id : 640653357128 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0
Correct Marks : 1

Question Label : Multiple Choice Question

Internal Pool Sourcing is_______________

Options :

6406531183817. pooling employees together to form a team

6406531183818. filling a vacant position from within the organisation

6406531183819. transferring an employee to the bench once the project is completed

6406531183820. firing an employee from the project

Question Number : 107 Question Id : 640653357131 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which of the following is typically not a component of the “job description”?

Options :

6406531183829. Skills required for the job

6406531183830. Key responsibilities

6406531183831. job performance indicators

6406531183832. recruitment process

Question Number : 108 Question Id : 640653357132 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which of the following is not true?

Options :

6406531183833. appraisal of the candidate is a mandatory input during the recruitment


process
6406531183834. appraisal is the process of evaluating an employee’s current and/or past
performance against certain predetermined standards

6406531183835. All organisations have formal or informal means of appraising their


employees’ performance.

6406531183836. The performance appraisal process will include defining the job, appraising
performance and providing feedback.

Question Number : 109 Question Id : 640653357133 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

The graph below indicates which of the following.

This graph is based on the HR manager’s analysis of various job application channels. Please
answer based on the graph only.

Options :

6406531183837. Third Party and Direct Website Advertisements contribute to the least
application receipt per unit cost.

6406531183838. Employee Referral is the most preferred channel of application receipt


6406531183839. The likelihood of a candidate getting selected is higher when he applies
through Linkedin rather than the employer’s Direct Website

6406531183840. Linkedin fares better than Third Party Sources in application receipt

Question Number : 110 Question Id : 640653357138 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which of the following is not an actionable inference from A/B Testing?

Options :

6406531183853. Understanding Purchase Behaviors of Customers

6406531183854. Promoting specific products

6406531183855. Deciding Stock Keeping Limits of Warehouses

6406531183856. Making UI/UX changes in the website

Question Number : 111 Question Id : 640653357140 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

The following graph shows the distribution of Funding Instruments used on Mobile Devices by
users for various purchases. State whether the following statement is True or False

Statement : The chart follows the Pareto Principle.


Options :

6406531183861. TRUE

6406531183862. FALSE

Question Number : 112 Question Id : 640653357141 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Point out the drawback of BNPL (Buy Now Pay Later) for companies.

Options :

6406531183863. It increases the level of engagement of customers

6406531183864. Increases prospects of defaulting by customer

6406531183865. Enables Cash-Strapped millennials to make purchases

6406531183866. Shift’s user’s loyalty away from the competition

Question Number : 113 Question Id : 640653357142 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

If a FinTech company wants to cut down losses, which of the following should they do?
Options :

6406531183867. Increase approval cutoff of credit score

6406531183868. Decrease approval cutoff of credit score

6406531183869. Increase approval limit for loans

6406531183870. Give more loans

Sub-Section Number : 3

Sub-Section Id : 64065351800

Question Shuffling Allowed : Yes

Question Number : 114 Question Id : 640653357119 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

From the following Figure and options, which quadrant products will be placed in the secure area?
- Select all that apply

Options :

6406531183784. I

6406531183785. II

6406531183786. III
6406531183787. IV

Question Number : 115 Question Id : 640653357120 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Increase in which of the following items reduces the Net Margin? Choose all that apply

Options :

6406531183788. Revenue

6406531183789. Direct Material Cost

6406531183790. Direct Labour Cost

6406531183791. Shipping Cost

6406531183792. Tax on the Manufactured Product

Question Number : 116 Question Id : 640653357121 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Enterprise Resource Planning (ERP) enables the integration of which of the following domains.
Choose all that apply

Options :

6406531183793. Sales and Marketing

6406531183794. Operations

6406531183795. Human Resources

6406531183796. Logistics

Question Number : 117 Question Id : 640653357129 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

In which recruiting process(es) would an HR manager be dealing with qualitative (subjective) data?
Choose all that apply

Options :

6406531183821. resume shortlisting

6406531183822. job planning

6406531183823. interview scheduling

6406531183824. interview

Question Number : 118 Question Id : 640653357130 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Which parameters would be useful during a typical “Resume Shortlisting” exercise? Choose all that
apply

Options :

6406531183825. Last drawn Salary

6406531183826. Skill set of the Employee

6406531183827. Years of Work Experience

6406531183828. Hobbies of the Employee

Question Number : 119 Question Id : 640653357139 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

From a Credit approver’s perspective, who among the following would be allowed to draw a credit
for purchases?
Options :

6406531183857. Person A with low credit score with low engagement with the platform

6406531183858. Person B with High credit score, with low engagement with the platform

6406531183859. Person C with Average Credit Score, with High Engagement with the platform

6406531183860. Person D with maximum number of credit cards with no credit score

Sub-Section Number : 4

Sub-Section Id : 64065351801

Question Shuffling Allowed : No

Question Id : 640653357099 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Calculator : None Response Time : N.A
Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (120 to 122)

Question Label : Comprehension

A shift in the price of LPG from Rs. 760 per cylinder to Rs.840 per cylinder has reduced the quantity
demanded from 41 thousand cylinders per day to 39 thousand cylinders per day. Then answer the
given subquestions.

Sub questions

Question Number : 120 Question Id : 640653357100 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

Then what is the price elasticity of the LPG cylinder demand (round your answer to two decimal
places?

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :
0.35 to 0.38

Question Number : 121 Question Id : 640653357101 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Based on the price elasticity of LPG cylinder demand, it can be said that

Options :

6406531183732. LPG cylinders are normal goods

6406531183733. LPG cylinders are inferior goods

6406531183734. LPG cylinders are necessity goods

6406531183735. None of these

Question Number : 122 Question Id : 640653357102 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Suppose, as the price of LPG increased, the demand for kerosene has changed from 400 litres per
day to 500 litres per day. Then, which of the following statements are correct

Options :

6406531183736. LPG cylinder and Kerosene are complements to each other

6406531183737. Kerosene is a substitute for LPG cylinder

6406531183738. Both are items have no relation to each other

6406531183739. Cannot say, insufficient data

Question Id : 640653357105 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Calculator : None Response Time : N.A
Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (123 to 125)


Question Label : Comprehension

The data for producing a product is provided in the Table below. Using this information, match the
curves given in the Figure to their respective representation in the subquestions

Sub questions

Question Number : 123 Question Id : 640653357106 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Curve-A represents
Options :

6406531183748. Average Total cost

6406531183749. Average variable cost

6406531183750. Marginal cost

6406531183751. None of these

Question Number : 124 Question Id : 640653357107 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Curve-B represents

Options :

6406531183752. Average Total cost

6406531183753. Average variable cost

6406531183754. Marginal cost

6406531183755. None of these

Question Number : 125 Question Id : 640653357108 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Curve-C represents

Options :

6406531183756. Average Total cost

6406531183757. Average variable cost

6406531183758. Marginal cost

6406531183759. None of these


Question Id : 640653357134 Question Type : COMPREHENSION Sub Question Shuffling
Allowed : No Group Comprehension Questions : No Calculator : None Response Time : N.A
Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (126 to 128)

Question Label : Comprehension

Company HiringSoft wants to recruit Software Engineers for its new project. The hiring manager
was tasked with choosing the appropriate hiring channel. The manager collected previous hiring
data (provided in the table below) to help narrow down the appropriate channel. All channels
advertised for the vacant positions on the same day.

Based on the above data, answer the given subquestions.

Sub questions

Question Number : 126 Question Id : 640653357135 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which channel has the best shortlist success rate? The Shortlist success rate is defined as the
shortlisted applications to applications received.

Options :

6406531183841. Hiring Portals

6406531183842. Social and Professional Media


6406531183843. Print Ads

6406531183844. Employee Referrals

Question Number : 127 Question Id : 640653357136 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

If the hiring manager has to go only with the parameter, cost per candidates selected, which
would be the most appropriate channel?

Options :

6406531183845. Direct Company Website

6406531183846. Print Ads

6406531183847. Employee Referrals

6406531183848. Social and Professional Media

Question Number : 128 Question Id : 640653357137 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which channel has the worst selection success rate? The Selection success rate is defined as the
no. of candidates selected to the no. of applications shortlisted.

Options :

6406531183849. Hiring Portals

6406531183850. Social and Professional Media

6406531183851. Print Ads

6406531183852. Employee Referrals

Sub-Section Number : 5

Sub-Section Id : 64065351802

Question Shuffling Allowed : No


Question Id : 640653357109 Question Type : COMPREHENSION Sub Question Shuffling
Allowed : No Group Comprehension Questions : No Calculator : None Response Time : N.A
Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (129 to 132)

Question Label : Comprehension

The below table provides the consolidated values of a company-X’s financial performance (ignore
all other non-mentioned financial parameters). Using this, answer the given subquestions.

Sub questions

Question Number : 129 Question Id : 640653357110 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

What is the gross profit margin (in %) for company-X (round to two decimal places)

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

39 to 41

Question Number : 130 Question Id : 640653357111 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0
Correct Marks : 1

Question Label : Short Answer Question

What is the net profit for company-X?

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

87000

Question Number : 131 Question Id : 640653357112 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

What is the current ratio for company-X (round to two decimal places)

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

1.3 to 1.5

Question Number : 132 Question Id : 640653357113 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

What is the quick ratio for company-X (round to two decimal places)

Response Type : Numeric


Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

1.00

Question Id : 640653357122 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Calculator : None Response Time : N.A
Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (133 to 135)

Question Label : Comprehension

Please answer the given subquestions on the Overall Equipment Effectiveness of fasteners
manufacturing.

Hint:

Just in case you forgot the formula


Availability = Run Time / Planned Production Time
Run Time = Planned Production Time − Lost Time
Performance = (Total Count / Run Time) / Ideal Run Rate
Quality = Good Count / Total Count
OEE = Availability × Performance × Quality

Sub questions

Question Number : 133 Question Id : 640653357123 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

In a factory that manufactures fasteners, the bolt manufacturing process went out of control only
in terms of the number of scraps produced. Which factor(s) of Overall Equipment Effectiveness
(OEE) will be affected?

a) availability, b) performance, c) quality

Options :

6406531183797. only b

6406531183798. only c

6406531183799. b and c

6406531183800. only a

Question Number : 134 Question Id : 640653357124 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

Calculate the OEE of the Bolt Manufacturing Equipment

Hint: Choose the closest Answer

Options :

6406531183801. 0.83

6406531183802. 0.75

6406531183803. 0.90

6406531183804. Insufficient Information


Question Number : 135 Question Id : 640653357125 Question Type : MCQ Is Question
Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

An 8-hour no downtime shift has an OEE of 0.90 performing at its designed speed and produces a
total scrap of 90 units. What is the total number of units produced in the shift?

Options :

6406531183805. 810

6406531183806. 9000

6406531183807. 900

6406531183808. Insufficient Information

Business Analytics
Section Id : 64065322341

Section Number : 6

Section type : Online

Mandatory or Optional : Mandatory

Number of Questions : 19

Number of Questions to be attempted : 19

Section Marks : 55

Display Number Panel : Yes

Group All Questions : No

Enable Mark as Answered Mark for Review and


Yes
Clear Response :

Maximum Instruction Time : 0

Sub-Section Number : 1

Sub-Section Id : 64065351803
6406531195841. Dexter

6406531195842. None of these

Sub-Section Number : 6

Sub-Section Id : 64065352699

Question Shuffling Allowed : Yes

Question Number : 259 Question Id : 640653361029 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

Which of the following statement(s) is/are correct regarding cookies, local storage, and session
storage?

Options :

6406531195771. The local storage is a browser based persistent storage.

6406531195772. Cookies are preferred over session or local storage, when the data needs to be
sent with every request.

6406531195773. The cookies can be set from the server as well as using javascript on the client.

6406531195774. All of these

BDM
Section Id : 64065322465

Section Number : 8

Section type : Online

Mandatory or Optional : Mandatory

Number of Questions : 32

Number of Questions to be attempted : 32

Section Marks : 40

Display Number Panel : Yes


Group All Questions : No

Enable Mark as Answered Mark for Review and


Yes
Clear Response :

Maximum Instruction Time : 0

Sub-Section Number : 1

Sub-Section Id : 64065352700

Question Shuffling Allowed : No

Question Number : 260 Question Id : 640653361048 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 0

Question Label : Multiple Choice Question

Options :

6406531195847. Yes

6406531195848. No

Sub-Section Number : 2

Sub-Section Id : 64065352701

Question Shuffling Allowed : Yes

Question Number : 261 Question Id : 640653361060 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Given the below figure on the relationship between price, supply and demand, what are the
equilibrium price, shortage price and surplus price respectively?
Options :

6406531195867. Rs. 233, Rs. 250 and Rs.200

6406531195868. Rs. 233, Rs. 200 and Rs.250

6406531195869. Rs. 800, Rs. 1000 and Rs. 600

6406531195870. Rs. 800, Rs. 600 and Rs. 1000

Question Number : 262 Question Id : 640653361061 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which of the following is not a source of survey data?

Options :

6406531195871. Stock market data

6406531195872. Market research data

6406531195873. Consumer pyramid data

6406531195874. None of these

Question Number : 263 Question Id : 640653361062 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Match the following:

Options :

6406531195875. 1 – c, 2 – d, 3 – b, 4 – a

6406531195876. 1 – d, 2 – c, 3 – b, 4 – a

6406531195877. 1 – b, 2 – d, 3 – c, 4 – a

6406531195878. 1 – a, 2 – d, 3 – c, 4 – b

Question Number : 264 Question Id : 640653361064 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

With the following data, figure out which SKU has the maximum Average Days of Inventory
Options :

6406531195883. F01

6406531195884. F02

6406531195885. F03

6406531195886. F04

Question Number : 265 Question Id : 640653361065 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

From the table, calculate the revenue growth on 8th July 2022 with respect to 7th July 2022 and
select the closest option given below.

Options :

6406531195887. 3%

6406531195888. -3%

6406531195889. 1%

6406531195890. 0%
Question Number : 266 Question Id : 640653361066 Question Type : MCQ Is Question
Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Pareto chart does not identify ____________.

Options :

6406531195891. The Products which contribute to all of the company’s revenue and sales
volumes

6406531195892. The Products which do not contribute at all towards the revenue and sales

6406531195893. Company’s best performing Products

6406531195894. Future Trends

Question Number : 267 Question Id : 640653361067 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Match the following.

Options :

6406531195895. 1: c; 2: a; 3: b; 4: d
6406531195896. 1: a; 2: c; 3: b; 4: d

6406531195897. 1: b; 2: c; 3: a; 4: d

6406531195898. 1: a; 2: b; 3: d; 4: c

Question Number : 268 Question Id : 640653361075 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

When arranging the type of plans in ascending order, their duration of the plan (in terms of Time),
Which of the following sequence is more appropriate for low technology and quick set up factory
operation?

Options :

6406531195924. Strategic Plan – Capacity Requirement Plan – Purchase Plan – Production Plan –
Shift Operation Plan

6406531195925. Shift Operation Plan – Production Plan – Purchase Plan – Capacity Requirement
Plan – Strategic Plan

6406531195926. Shift Operation Plan – Production Plan – Purchase Plan – Strategic Plan -
Capacity Requirement Plan

6406531195927. Shift Operation Plan – Purchase Plan – Production Plan – Capacity Requirement
Plan – Strategic Plan

Question Number : 269 Question Id : 640653361076 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

The graph below indicates which of the following


Options :

6406531195928. Order Quantity is constant between Mar-19 and Jan-20

6406531195929. Order Quantity follows production issues

6406531195930. Order Quantity is likely to be influenced by existing inventory

6406531195931. No meaningful conclusion can be arrived from the graph.

Question Number : 270 Question Id : 640653361077 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Internal Pool Sourcing is_________________

Options :

6406531195932. pooling employees together to form a team

6406531195933. filling a vacant position from within the organisation

6406531195934. transferring an employee to the bench once the project is completed

6406531195935. firing an employee from the project

Question Number : 271 Question Id : 640653361080 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which of the following is typically not a component of the “job description”?

Options :

6406531195944. Skills required for the job

6406531195945. Key responsibilities

6406531195946. job performance indicators

6406531195947. recruitment process

Question Number : 272 Question Id : 640653361081 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which of the following is not true?

Options :

6406531195948. appraisal of the candidate is a mandatory input during the recruitment


process

6406531195949. appraisal is the process of evaluating an employee’s current and/or past


performance against certain predetermined standards

6406531195950. All organisations have formal or informal means of appraising their


employees’ performance

6406531195951. The performance appraisal process will include defining the job, appraising
performance and providing feedback

Question Number : 273 Question Id : 640653361082 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question


The graph below indicates which of the following?

This graph is based on the HR manager’s analysis of various job application channels. Please
answer based on the graph only.

Options :

6406531195952. Third Party and Direct Website Advertisements contribute to the least
application receipt per unit cost.

6406531195953. Employee Referral is the most preferred channel of application receipt

6406531195954. The likelihood of a candidate getting selected is higher when he applies


through Linkedin rather than the employer’s Direct Website

6406531195955. Linkedin fares better than Third Party Sources in application receipt

Question Number : 274 Question Id : 640653361087 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which of the following is not an actionable inference from A/B Testing?

Options :

6406531195968. Understanding Purchase Behaviors of Customers


6406531195969. Deciding Stock Keeping Limits of Warehouses

6406531195970. Promoting specific products

6406531195971. Making UI/UX changes in the website

Question Number : 275 Question Id : 640653361089 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

The following graph shows the distribution of Funding Instruments used on Mobile Devices by
users for various purchases. State whether the following statement is True or False

Statement : The chart follows the Pareto Principle.

Options :

6406531195976. FALSE

6406531195977. TRUE

Question Number : 276 Question Id : 640653361090 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question


Point out the drawback of BNPL (Buy Now Pay Later) for companies.

Options :

6406531195978. It increases the level of engagement of customers

6406531195979. Enables Cash-Strapped millennials to make purchases

6406531195980. Increases prospects of defaulting by customer

6406531195981. Shift’s user’s loyalty away from the competition

Question Number : 277 Question Id : 640653361091 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

If a FinTech company wants to cut down losses, which of the following should they do?

Options :

6406531195982. Decrease approval cutoff of credit score

6406531195983. Increase approval limit for loans

6406531195984. Increase approval cutoff of credit score

6406531195985. Give more loans

Sub-Section Number : 3

Sub-Section Id : 64065352702

Question Shuffling Allowed : Yes

Question Number : 278 Question Id : 640653361050 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Why is the quick ratio a more rigorous test of short-term solvency than the current ratio? (Choose
all that are applicable)

Options :
6406531195850. The quick ratio considers only cash and marketable securities as current assets

6406531195851. The quick ratio eliminates prepaid expenses for the numerator

6406531195852. The quick ratio eliminates prepaid expenses for the denominator

6406531195853. The quick ratio eliminates inventories from the numerator

Question Number : 279 Question Id : 640653361059 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Which of the following statement(s) is/are true (choose all that is applicable)

Options :

6406531195863. Cross Price Elasticity and Income Elasticity both measure shift in demand curve

6406531195864. Cross Price Elasticity and Income Elasticity both measure movement along
demand curve

6406531195865. Cross Price Elasticity measures shift in demand curve and Income Elasticity
measure movement along demand curve

6406531195866. Cross Price Elasticity measure movement along demand curve and Income
Elasticity both measure shift in demand curve

Question Number : 280 Question Id : 640653361063 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Which of the following options is/are correct? (Multi-Select)

If you increase the production volume:

Options :

6406531195879. The capacity utilization is increased

6406531195880. The capacity utilization is decreased


6406531195881. ROCE is decreased

6406531195882. ROCE is increased

Question Number : 281 Question Id : 640653361068 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

From the following Figure and options, which quadrant products will be placed in the secure area?
- Select all that apply

Options :

6406531195899. I

6406531195900. II

6406531195901. III

6406531195902. IV

Question Number : 282 Question Id : 640653361069 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1
Question Label : Multiple Select Question

Increase in which of the following items reduces the Net Margin? Choose all that apply

Options :

6406531195903. Revenue

6406531195904. Direct Material Cost

6406531195905. Direct Labour Cost

6406531195906. Shipping Cost

6406531195907. Tax on the Manufactured Product

Question Number : 283 Question Id : 640653361070 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Enterprise Resource Planning (ERP) enables the integration of which of the following domains?
Choose all that apply

Options :

6406531195908. Sales and Marketing

6406531195909. Operations

6406531195910. Human Resources

6406531195911. Logistics

Question Number : 284 Question Id : 640653361078 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

In which recruiting process(es) would an HR manager be dealing with qualitative (subjective) data?
Choose all that apply

Options :

6406531195936. resume shortlisting


6406531195937. job planning

6406531195938. interview scheduling

6406531195939. interview

Question Number : 285 Question Id : 640653361079 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Which parameters would be useful during a typical “Resume Shortlisting” exercise? Choose all that
apply

Options :

6406531195940. Last drawn Salary

6406531195941. Skill set of the Employee

6406531195942. Years of Work Experience

6406531195943. Hobbies of the Employee

Question Number : 286 Question Id : 640653361088 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

From a Credit approver’s perspective, who among the following would be allowed to draw a credit
for purchases?

Options :

6406531195972. Person B with High credit score, with low engagement with the platform

6406531195973. Person C with Average Credit Score, with High Engagement with the platform

6406531195974. Person A with low credit score with low engagement with the platform

6406531195975. Person D with maximum number of credit cards with no credit score

Sub-Section Number : 4

Sub-Section Id : 64065352703
Question Shuffling Allowed : Yes

Question Number : 287 Question Id : 640653361049 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

A straight-line demand curve with slope of -1 intersects the horizontal axis at 100 tons per week At
the midpoint of the demand curve (corresponding to 50 tons per week) the price elasticity of
demand is __

(Hint: The demand curve is moving from the mid-point to the point on the horizontal axis)

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

-1

Sub-Section Number : 5

Sub-Section Id : 64065352704

Question Shuffling Allowed : No

Question Id : 640653361051 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Calculator : None Response Time : N.A
Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (288 to 289)

Question Label : Comprehension

The data for producing a product is provided in the Table below Using this information, answer
the given subquestions
Sub questions

Question Number : 288 Question Id : 640653361052 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2

Question Label : Short Answer Question

What is the point (in terms of number of units to be produced in the given table) where the
production should be located?

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

32

Question Number : 289 Question Id : 640653361053 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Select Question

Why do you choose the previous point (choose all that is applicable)?

Options :

6406531195855. Because, fixed cost is constant at all points

6406531195856. Because it is point where the marginal cost is minimum

6406531195857. Because it is the point where the profit is maximum


6406531195858. None of these

Question Id : 640653361071 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Calculator : None Response Time : N.A
Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (290 to 292)

Question Label : Comprehension

Please answer the given subquestions on the Overall Equipment Effectiveness of fasteners
manufacturing.

Hint:

Just in case you forgot the formula


Availability = Run Time / Planned Production Time
Run Time = Planned Production Time − Lost Time
Performance = (Total Count / Run Time) / Ideal Run Rate
Quality = Good Count / Total Count
OEE = Availability × Performance × Quality

Sub questions

Question Number : 290 Question Id : 640653361072 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

In a factory that manufactures fasteners, the bolt manufacturing process went out of control only
in terms of the number of scraps produced. Which factor(s) of Overall Equipment Effectiveness
(OEE) will be affected?

a) availability, b) performance, c) quality

Options :

6406531195912. only b
6406531195913. only c

6406531195914. b and c

6406531195915. only a

Question Number : 291 Question Id : 640653361073 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Calculate the OEE of the Bolt Manufacturing Equipment

Hint: Choose the closest Answer

Options :

6406531195916. 0.83

6406531195917. 0.75

6406531195918. 0.90

6406531195919. Insufficient Information

Question Number : 292 Question Id : 640653361074 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1
Question Label : Multiple Choice Question

An 8-hour no downtime shift has an OEE of 0.90 performing at its designed speed and produces a
total scrap of 90 units. What is the total number of units produced in the shift?

Options :

6406531195920. 810

6406531195921. 9000

6406531195922. 900

6406531195923. Insufficient Information

Question Id : 640653361083 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Calculator : None Response Time : N.A
Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (293 to 295)

Question Label : Comprehension

Company HiringSoft wants to recruit Software Engineers for its new project. The hiring manager
was tasked with choosing the appropriate hiring channel. The manager collected previous hiring
data (provided in the table below) to help narrow down the appropriate channel. All channels
advertised for the vacant positions on the same day.

Based on the above data, answer the given subquestions.

Sub questions

Question Number : 293 Question Id : 640653361084 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which channel has the best shortlist success rate? The Shortlist success rate is defined as the
shortlisted applications to applications received.

Options :

6406531195956. Hiring Portals

6406531195957. Social and Professional Media

6406531195958. Print Ads

6406531195959. Employee Referrals

Question Number : 294 Question Id : 640653361085 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

If the hiring manager has to go only with the parameter, cost per candidated selected, which
would be the most appropriate channel?

Options :

6406531195960. Direct Company Website

6406531195961. Print Ads

6406531195962. Employee Referrals

6406531195963. Social and Professional Media

Question Number : 295 Question Id : 640653361086 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which channel has the worst selection success rate? The Selection success rate is defined as the
no. of candidates selected to the no. of applications shortlisted.
Options :

6406531195964. Social and Professional Media

6406531195965. Print Ads

6406531195966. Hiring Portals

6406531195967. Employee Referrals

Sub-Section Number : 6

Sub-Section Id : 64065352705

Question Shuffling Allowed : No

Question Id : 640653361054 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Calculator : None Response Time : N.A
Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (296 to 299)

Question Label : Comprehension

The below table provides the consolidated values of a company-X’s financial performance (ignore
all other non-mentioned financial parameters) Using this, answer the given subquestions

Sub questions

Question Number : 296 Question Id : 640653361055 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

What is the gross profit margin (in %) for company-X (round to two decimal places)

Response Type : Numeric

Evaluation Required For SA : Yes


Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

51 to 53

Question Number : 297 Question Id : 640653361056 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

What is the net profit for company-X?

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

10000

Question Number : 298 Question Id : 640653361057 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

What is the current ratio for company-X (round to two decimal places)

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :
2.10 to 2.30

Question Number : 299 Question Id : 640653361058 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

What is the quick ratio for company-X (round to two decimal places)

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

1.10 to 1.30

Business Analytics
Section Id : 64065322466

Section Number : 9

Section type : Online

Mandatory or Optional : Mandatory

Number of Questions : 18

Number of Questions to be attempted : 18

Section Marks : 55

Display Number Panel : Yes

Group All Questions : No

Enable Mark as Answered Mark for Review and


Yes
Clear Response :

Maximum Instruction Time : 0

Sub-Section Number : 1
capabilities of comicgen?

Options :

6406531512449. Comicgen can create comic characters

6406531512450. Comicgen provides options to custom create different comic characters and
their emotions and pose

6406531512451. Comicgen can be easily integrated into Google sheets or Excel to narrate your
data stories

6406531512452. You can type in your data story into comicgen to get your comic in return

Question Number : 135 Question Id : 640653454820 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1 Selectable Option : 0

Question Label : Multiple Select Question

scikit-network package contains functions for (pick all correct sentences):

Options :

6406531512577. analysis of faults in a computer network

6406531512578. social network analysis

6406531512579. analysis of large graphs

6406531512580. enhancing one’s social network

BDM
Section Id : 64065329421

Section Number : 5

Section type : Online

Mandatory or Optional : Mandatory

Number of Questions : 21

Number of Questions to be attempted : 21

Section Marks : 40
Display Number Panel : Yes

Group All Questions : No

Enable Mark as Answered Mark for Review and


Yes
Clear Response :

Maximum Instruction Time : 0

Sub-Section Number : 1

Sub-Section Id : 64065365720

Question Shuffling Allowed : No

Is Section Default? : null

Question Number : 136 Question Id : 640653454826 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 0

Question Label : Multiple Choice Question

THIS IS QUESTION PAPER FOR THE SUBJECT "DIPLOMA LEVEL: BUSINESS DATA MANAGEMENT"

ARE YOU SURE YOU HAVE TO WRITE EXAM FOR THIS SUBJECT?
CROSS CHECK YOUR HALL TICKET TO CONFIRM THE SUBJECT TO BE WRITTEN.

(IF IT IS NOT THE CORRECT SUBJECT, PLS CHECK THE SECTION AT THE TOP FOR THE SUBJECTS
REGISTERED BY YOU)

Options :

6406531512601. Yes

6406531512602. No

Sub-Section Number : 2

Sub-Section Id : 64065365721

Question Shuffling Allowed : Yes

Is Section Default? : null

Question Number : 137 Question Id : 640653454827 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

What does marginal utility measure?

Options :

6406531512603. Satisfaction divided by the quantity of the good

6406531512604. Added satisfaction from having one more unit of the good

6406531512605. Satisfaction divided by the price of the good

6406531512606. All of these

6406531512607. None of these

Question Number : 138 Question Id : 640653454828 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Which of the following statements is always true?

Options :

6406531512608. Current ratio < Quick ratio

6406531512609. Current ratio < 0

6406531512610. Current ratio >= Quick ratio

6406531512611. Current ratio = Quick ratio

Question Number : 139 Question Id : 640653454830 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

When computing price elasticity, the slope of the demand curve depends on
Options :

6406531512616. The units used to measure quantity but not the units used to measure price

6406531512617. The units used to measure price but not the units used to measure quantity

6406531512618. Neither the units used to measure quantity nor the units used to measure
price

6406531512619. The units used to measure the quantity and the units used to measure price

Question Number : 140 Question Id : 640653454833 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

What category of SKUs should be kept closer to the processing area?

Options :

6406531512628. Low demand / slow moving items - to avoid clutter or congestion near the
processing area

6406531512629. High Demand / Fast Moving items - Saves time and effort. Helps in quicker
access

6406531512630. Expensive Items - To increase security, the items are kept at a visible distance,
enabling constant surveillance

6406531512631. Inexpensive Items - To avoid significant losses caused by thefts.

Question Number : 141 Question Id : 640653454851 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

Internal Pool Sourcing is_________________

Options :

6406531512677. pooling employees together to form a team

6406531512678. filling a vacant position from within the organisation


6406531512679. transferring an employee to the bench once the project is completed

6406531512680. firing an employee from the project

Sub-Section Number : 3

Sub-Section Id : 64065365722

Question Shuffling Allowed : Yes

Is Section Default? : null

Question Number : 142 Question Id : 640653454829 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2 Selectable Option : 0

Question Label : Multiple Select Question

Which of the following is not a source of survey data? (select all that is applicable)

Options :

6406531512612. Market research data

6406531512613. Stock market data

6406531512614. Rainfall data

6406531512615. Consumer pyramid data

Question Number : 143 Question Id : 640653454840 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2 Selectable Option : 0

Question Label : Multiple Select Question

What does a high Average Days of Inventory signify?

Options :

6406531512650. Warehouse / Firm has inventory that is difficult to sell

6406531512651. It is a high-demand product - with a heavy flow of sales volume

6406531512652. The replenishment of that product from the Mother Distribution Center is not
keeping up with the sales observed by the recipient DC.
6406531512653. Too many return orders.

Question Number : 144 Question Id : 640653454843 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2 Selectable Option : 0

Question Label : Multiple Select Question

If the sales (volume) of the laptops increase in a particular period, which of the following item(s)
also increase(s)? Choose all that apply

Options :

6406531512663. Profit

6406531512664. Cost of Goods Sold

6406531512665. Closing Inventory

6406531512666. Fixed Cost

Question Number : 145 Question Id : 640653454852 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2 Selectable Option : 0

Question Label : Multiple Select Question

The graphs below indicate which of the following? Choose all that apply
Options :

6406531512681. Production Quantity is similar between two fiscal years (2019-20 and 2020-21)

6406531512682. Difference between the Sales and Production shows an increase in December
2019-20 from the previous month

6406531512683. Production Quantity is likely to be influenced by Sales

6406531512684. No meaningful conclusion can be derived from the graph.

Sub-Section Number : 4

Sub-Section Id : 64065365723

Question Shuffling Allowed : Yes

Is Section Default? : null

Question Number : 146 Question Id : 640653454831 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 3 Selectable Option : 0


Question Label : Multiple Select Question

If the current ratio is 2:1 and the Quick ratio is 1.5:1, then which of the following is/are true? (Select
all that are applicable)

Options :

6406531512620. Current assets are 2 times the liability

6406531512621. Liability is 2 times the current assets

6406531512622. Stocks is 0.5 times the liability

6406531512623. Liability is 0.5 times Stocks

6406531512624. Current assets are greater than stocks

6406531512625. Stocks are greater than current assets

6406531512626. None of these

Sub-Section Number : 5

Sub-Section Id : 64065365724

Question Shuffling Allowed : Yes

Is Section Default? : null

Question Number : 147 Question Id : 640653454832 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2

Question Label : Short Answer Question

The decrease in price of a product from INR 10 to INR 8 raised the demand by 30%. What is the
elasticity of demand for the product?

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

1.5
Question Number : 148 Question Id : 640653454838 Question Type : SA Calculator : None
Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2

Question Label : Short Answer Question

From the table, calculate the revenue growth on 11. April 2021 with respect to 10. April 2021.

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

13.4 to 14.8

Sub-Section Number : 6

Sub-Section Id : 64065365725

Question Shuffling Allowed : Yes

Is Section Default? : null

Question Number : 149 Question Id : 640653454834 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

Match the following

Options :

6406531512632. A - 4,B - 2,C - 1,D - 5

6406531512633. A -5,B - 4,C - 1,D - 3

6406531512634. A -3,B - 4,C - 2,D -5

6406531512635. A -1,B - 4,C -2,D - 5

Question Number : 150 Question Id : 640653454839 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

The figure represents a bubble chart for mobiles, where X-axis represents the Volumes, Y-axis
represents the Revenues, and the size of the bubble represents the average days of inventory.
Select the option/s that is/are wrong:
Options :

6406531512646. Reduce the inventory for the SKU with 24 as average days of inventory

6406531512647. Increase the inventory for the SKU with 24 as average days of inventory

6406531512648. SKU with 24 is an Outlier and hence remove it from analysis.

6406531512649. Both Reduce the inventory for the SKU with 24 as average days of inventory &
SKU with 24 is an Outlier and hence remove it from analysis.

Question Number : 151 Question Id : 640653454854 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

Arrange the following steps while working with unstructured data in a ranking modeling:

I. Normalizing
II. Preprocessing
III. Ranking
IV. Composite score

Options :

6406531512689. I -> II -> III -> IV

6406531512690. II -> I -> IV -> III


6406531512691. I -> II -> IV -> III

6406531512692. II -> I -> III -> IV

Sub-Section Number : 7

Sub-Section Id : 64065365726

Question Shuffling Allowed : Yes

Is Section Default? : null

Question Number : 152 Question Id : 640653454853 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 3

Question Label : Multiple Choice Question

Consider the dataset.

Here the factors F1 ..F3 are “higher the better”, but, F4 is “lower the better”. Rank the above
candidates and choose the correct ranking from the below options.

Options :

6406531512685. Partha > Akanksha > Siva > Lavanya

6406531512686. Akanksha > Lavanya > Siva> Partha

6406531512687. Partha < Akanksha < Lavanya < Siva

6406531512688. Akanksha < Lavanya < Siva< Partha

Sub-Section Number : 8

Sub-Section Id : 64065365727
Question Shuffling Allowed : Yes

Is Section Default? : null

Question Number : 153 Question Id : 640653454841 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1 Selectable Option : 0

Question Label : Multiple Select Question

Which of the following are the functions of a Payment Merchant like G-Pay or Paytm?

Options :

6406531512654. Targets users with low bank balances and provides them with surplus money

6406531512655. Acts as the mediator between the merchant and the financial institutions
involved

6406531512656. Acts as a distributor for products and services

6406531512657. Provides multiple payment options

Question Number : 154 Question Id : 640653454842 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1 Selectable Option : 0

Question Label : Multiple Select Question

Increase in which of the following will increase the Net Margin? Choose all that apply

Options :

6406531512658. Revenue

6406531512659. Direct Material Cost

6406531512660. Direct Labour Cost

6406531512661. Shipping Cost

6406531512662. Insufficient Information

Sub-Section Number : 9

Sub-Section Id : 64065365728

Question Shuffling Allowed : No


Is Section Default? : null

Question Id : 640653454835 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Question Pattern Type : NonMatrix
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (155 to 156)

Question Label : Comprehension

Analyze the following data set and answer the given sub questions

Sub questions

Question Number : 155 Question Id : 640653454836 Question Type : MSQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2 Selectable Option : 0

Question Label : Multiple Select Question

What can we infer from this A/B Testing?

Options :

6406531512636. People who buy Groceries avoid the usage of Credit Card

6406531512637. The test group did not respond well to the new features or nudges.

6406531512638. The nudge worked.

6406531512639. It is not possible for a previously Medium level engagement customer to drop
down to an ‘About to Churn’ Level

Question Number : 156 Question Id : 640653454837 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

If a FinTech company wants to cut down losses, which of the following should they do?

Options :

6406531512640. Increase approval cutoff of credit score

6406531512641. Decrease approval cutoff of credit score

6406531512642. Increase interest rate

6406531512643. Increase approval limit for loans

6406531512644. Give more loans

Sub-Section Number : 10

Sub-Section Id : 64065365729

Question Shuffling Allowed : No

Is Section Default? : null

Question Id : 640653454844 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Question Pattern Type : NonMatrix
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (157 to 162)

Question Label : Comprehension

Answer the given subquestions on the Overall Equipment Effectiveness of fasteners


manufacturing.

Hint:
Just in case you forgot the formula
Availability = Run Time / Planned Production Time
Run Time = Planned Production Time − Lost Time
Performance = (Total Count / Run Time) / Ideal Run Rate
Quality = Good Count / Total Count
OEE = Availability × Performance × Quality

Sub questions

Question Number : 157 Question Id : 640653454845 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 1

Question Label : Multiple Choice Question

A nut manufacturing process had scheduled maintenance of two shifts in a particular week. Which
components(s) of Overall Equipment Effectiveness (OEE) will certainly be affected in that week?

a) availability
b) performance
c) quality

Options :

6406531512667. only b

6406531512668. only a

6406531512669. b and c

6406531512670. All of these

6406531512671. None of these

Question Number : 158 Question Id : 640653454846 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

Calculate the following of the Gear Manufacturing Equipment for a particular week
Availability - _______%

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

85 to 86

Question Number : 159 Question Id : 640653454847 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

Calculate the following of the Gear Manufacturing Equipment for a particular week
Performance ________%

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

77.5 to 78.5

Question Number : 160 Question Id : 640653454848 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

Calculate the following of the Gear Manufacturing Equipment for a particular week
Quality ________%

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

97.5 to 98.5

Question Number : 161 Question Id : 640653454849 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

Calculate the following of the Gear Manufacturing Equipment for a particular week
OEE ________ (Enter a number from 0 to 1 up to 3 decimal places)

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

0.640 to 0.670

Question Number : 162 Question Id : 640653454850 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 1

Question Label : Short Answer Question

An 8-hour shift of clamp manufacturing process (with no downtime) has an OEE of 0.90
performing at its designed speed and produces a total scrap of 45 units. What is the total number
of units produced in the shift?
Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Equal

Text Areas : PlainText

Possible Answers :

450

System Commands
Section Id : 64065329422

Section Number : 6

Section type : Online

Mandatory or Optional : Mandatory

Number of Questions : 16

Number of Questions to be attempted : 16

Section Marks : 100

Display Number Panel : Yes

Group All Questions : No

Enable Mark as Answered Mark for Review and


Yes
Clear Response :

Maximum Instruction Time : 0

Sub-Section Number : 1

Sub-Section Id : 64065365730

Question Shuffling Allowed : No

Is Section Default? : null

Question Number : 163 Question Id : 640653454855 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0
BDM
Section Id : 64065338325

Section Number : 8

Section type : Online

Mandatory or Optional : Mandatory

Number of Questions : 15

Number of Questions to be attempted : 15

Section Marks : 40

Display Number Panel : Yes

Group All Questions : No

Enable Mark as Answered Mark for Review and


Yes
Clear Response :

Maximum Instruction Time : 0

Sub-Section Number : 1

Sub-Section Id : 64065380392

Question Shuffling Allowed : No

Is Section Default? : null

Question Number : 219 Question Id : 640653563932 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 0

Question Label : Multiple Choice Question

THIS IS QUESTION PAPER FOR THE SUBJECT "DIPLOMA LEVEL : BUSINESS DATA MANAGEMENT
(COMPUTER BASED EXAM)"

ARE YOU SURE YOU HAVE TO WRITE EXAM FOR THIS SUBJECT?
CROSS CHECK YOUR HALL TICKET TO CONFIRM THE SUBJECTS TO BE WRITTEN.

(IF IT IS NOT THE CORRECT SUBJECT, PLS CHECK THE SECTION AT THE TOP FOR THE SUBJECTS
REGISTERED BY YOU)

Options :

6406531885137. YES

6406531885138. NO

Sub-Section Number : 2

Sub-Section Id : 64065380393

Question Shuffling Allowed : Yes

Is Section Default? : null

Question Number : 220 Question Id : 640653563933 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

When does marginal utility become negative?

Options :

6406531885139. When a consumer consumes the first unit of a good

6406531885140. When the total utility of a good is zero.

6406531885141. When the total utility of a good is at its maximum.

6406531885142. When the consumer reaches the point of overconsumption.

Question Number : 221 Question Id : 640653563935 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

The current ratio is a measure of:

Options :
6406531885147. A company's ability to pay its long-term debt obligations.

6406531885148. A company's liquidity and short-term solvency.

6406531885149. A company's ability to generate profits.

6406531885150. A company's efficiency in managing its inventory.

Question Number : 222 Question Id : 640653563936 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

A Company has current assets of $500,000 and current liabilities of $250,000. What is the current
ratio of the company?

Options :

6406531885151. 2

6406531885152. 0.5

6406531885153. 1

6406531885154. 1.5

Question Number : 223 Question Id : 640653563937 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

Match the following


Options :

6406531885155. 1-A, 2-B, 3-C, 4-D

6406531885156. 1-C, 2-D, 3-A, 4-B

6406531885157. 1-B, 2-C, 3-D, 4-A

6406531885158. 1-D, 2-A, 3-B, 4-C

Question Number : 224 Question Id : 640653563938 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

What do regional tables signify?

Options :

6406531885159. It tells which region brought the most revenue and volume sales.

6406531885160. It tells which production unit gave the highest revenue and volume sales.

6406531885161. It organizes data based on geographic regions and areas.

6406531885162. Both It tells which region brought the most revenue and volume sales & It
organizes data based on geographic regions and areas.

Question Number : 225 Question Id : 640653563940 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

Which of the SKU should be placed closer to the processing center?

Options :

6406531885167. A

6406531885168. B

6406531885169. C

6406531885170. D

Question Number : 226 Question Id : 640653563949 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

Match the following


Options :

6406531885177. 1-A, 2-B, 3-C, 4-D

6406531885178. 1-D, 2-C, 3-B, 4-A

6406531885179. 1-B, 2-C, 3-D, 4-A

6406531885180. 1-D, 2-A, 3-B, 4-C

Question Number : 227 Question Id : 640653563952 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 2

Question Label : Multiple Choice Question

Suppose you have an Excel cell containing the following text string: "03/12/2022 14:36:00". Which
of the following formulas will return the date "03/12/2022" from this cell using the LEFT function?

Options :

6406531885189. =LEFT(A1, 10)

6406531885190. =LEFT(A1, 8)

6406531885191. =LEFT(A1, 5)

6406531885192. =LEFT(A1, 7)

Sub-Section Number : 3

Sub-Section Id : 64065380394

Question Shuffling Allowed : Yes


Is Section Default? : null

Question Number : 228 Question Id : 640653563934 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 3

Question Label : Multiple Choice Question

If the price of a product increases by 10% and the quantity demanded decreases by 20%, what is
the price elasticity of demand?

Options :

6406531885143. 2

6406531885144. 0.5

6406531885145. 1

6406531885146. 1.5

Question Number : 229 Question Id : 640653563939 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 3

Question Label : Multiple Choice Question

Consider the dataset. Rank the candidates, and choose the option correctly. Here appraisal score,
duration in the current post, and count of skills are higher the better, whereas the joining
possibility is lower the better.
Options :

6406531885163. D>C>B>A

6406531885164. C>D>B>A

6406531885165. B>A>C>D

6406531885166. A>B>C>D

Question Number : 230 Question Id : 640653563950 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 3

Question Label : Multiple Choice Question

Give the preference order in which the following people are most likely to get their credit request
approved

Options :

6406531885181. Deepak > Bobby > Catty > Alya


6406531885182. Alya > Deepak > Catty > Bobby

6406531885183. Bobby > Catty > Alya > Deepak

6406531885184. Deepak > Alya > Catty > Bobby

Question Number : 231 Question Id : 640653563951 Question Type : MCQ Is Question


Mandatory : No Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction
Time : 0

Correct Marks : 3

Question Label : Multiple Choice Question

The following table provides the number of credit applications approved or declined in 4 months
in 2021

Which Month has the highest approval rate?

Options :

6406531885185. July

6406531885186. August

6406531885187. September

6406531885188. October

Sub-Section Number : 4

Sub-Section Id : 64065380395

Question Shuffling Allowed : No

Is Section Default? : null


Question Id : 640653563941 Question Type : COMPREHENSION Sub Question Shuffling
Allowed : No Group Comprehension Questions : No Question Pattern Type : NonMatrix
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (232 to 235)

Question Label : Comprehension

Calculate the given subquestions for Gear Hobbing Process for Week 1

Sub questions

Question Number : 232 Question Id : 640653563942 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2

Question Label : Short Answer Question

Availability - _______%

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

70 to 73
Question Number : 233 Question Id : 640653563943 Question Type : SA Calculator : None
Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2

Question Label : Short Answer Question

Performance ________%

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

85 to 87

Question Number : 234 Question Id : 640653563944 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2

Question Label : Short Answer Question

Quality ________%

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

92.5 to 94

Question Number : 235 Question Id : 640653563945 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2
Question Label : Short Answer Question

OEE _______ (Enter a number between 0 and 1 up to 3 decimal places)

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

0.560 to 0.583

Sub-Section Number : 5

Sub-Section Id : 64065380396

Question Shuffling Allowed : No

Is Section Default? : null

Question Id : 640653563946 Question Type : COMPREHENSION Sub Question Shuffling


Allowed : No Group Comprehension Questions : No Question Pattern Type : NonMatrix
Calculator : None Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Question Numbers : (236 to 237)

Question Label : Comprehension

Answer the given subquestions concerning the Hobbing process of gear manufacturing?

Total Output of Gear Casts after Broaching: 2300

Cost of Broaching: INR 27 per Gear cast, Raw Material Cost: INR 43 per Gear Cast

Sub questions
Question Number : 236 Question Id : 640653563947 Question Type : SA Calculator : None
Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2

Question Label : Short Answer Question

Scrap Percentage after broaching process__________________%

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

3.15 to 3.25

Question Number : 237 Question Id : 640653563948 Question Type : SA Calculator : None


Response Time : N.A Think Time : N.A Minimum Instruction Time : 0

Correct Marks : 2

Question Label : Short Answer Question

Loss due to scrap after broaching_________________________

Response Type : Numeric

Evaluation Required For SA : Yes

Show Word Count : Yes

Answers Type : Range

Text Areas : PlainText

Possible Answers :

5050 to 5300

System Commands
Section Id : 64065338326

You might also like