Capacitance Array Tool (CAT)
Provides accurate fluid hold up across the entire
wellbore
Applications i, gas, and water have different diameter of the wellbore—rather
+ Phase identification inhorizontol and dielectric constants. The than along it—results in an
highly deviated wells Capacitance array (CATO) accurate cross-sectional plot of
Tooluses this property to identify fluid phases. Combined with
* Calculation of the percentage of fluid phases in high deviation data from the Spinner Array Tool
each phase present ‘ond horizontal wells Run (SAT) Gas aay Too! (GA) and
+ Plottingof phase composition along centralised in the wellbore, the _the Resistance Array Tool (RAT),
the wellbore CAT isflly combinable with the tool allows quantitative
‘other Ultrawire™ production _estimaates ofthe volumetric low
+ Identification of water entry areas roggingtoote PF wate foreach prose
+ Changes in wellbore fluids with either
time or different production rates, An array of 12 miniature sensors
‘are mounted on the inside of a
set of collapsible bowsprings
Features and Benefits ‘and measure the capacitance
+ Combinable with other Sondox of the surrounding fluid close to
Ultrawire™ production logging tools _the well casing, All 12 values are
simultaneously transmitted to
the surface or into a memory
section. Taking measurements
ina single plane across the
+ Combinable with other tools of the
Multiple Array Product Suite via
Rotational alignment Subs (RAS)
+ Production Inclinometer
Accelerometer (PIA) recommended
+ 3D imaging of water holdup profile bi ipeilbaieialad
+ Array of 2 radial capacitane sensors
‘Temperature rating 350° (177°C)
SGUARNESLE pear wap
« colapsibie bow spring cums Tool diameter Lien. (48 mem)
seme and toce red ot Tootangth 519 (310m)
‘operations Tool weight 19.0 Ib (8.62 kg)
Coeasnapio on
veep sence
‘Sensor measure point 181 in, (459.7 mm)
veuntoreg tc
sondexcom gre zo aoe " .