Professional Documents
Culture Documents
ETP Queries
ETP Queries
TANNERY BUILDING
SCHEDULE NO. 5/8- EFFLUENT TREATMENT PLANT (ETP) EQUIPMENTS
INSTALLATIONS General:
1. Scope of control panel & electrical works
ALL works to be carried out in accordance with Tanzania 2. Scope of wetland plants
regulations.
CHANNEL COVERS
Stainless steel AISI 316L channel covers with size 400mm wide, heavy duty
A sustain load up 8tons complete with frame. The covers will installed inside
Tannery building.
MANHOLE COVERS
B Ditto but manhole cover with size 1000x1000mm, heavy duty
Mechanical raked sreens, stainless steel materials grade 316 with size of
equipment width 1200mm and height 3900mm, flow rate 0.8m/s, power 0.75-
1.5kW,screen course 10-12mm bar spacing (course), complete with driving
chain & device, guidance device, motor shield -IP 66, rake tine, side and
C Jash make can be approved?
bottom baffle, electrical cable from power room to machine approximately 55m
length, switch and box-IP 66 and control panel complete with other associated
accessories to enable the screen to work. The unit manufactured by
Daga/Evotech.
D Ditto but mechanical raked fine screens with 4-6mm bar spacing Jash make can be approved?
Ditto but chrome dissolving tank with capacity 600litres (size: 1000mm
B
diameter and 900mm height) positioned below mixing tank
Ditto but chrome storage tank with capacity 700litres (size: 1000mm diameter
C
and 1000mm height) positioned at 1500mm height
TANK PUMPS
Sumersible wastewater/sludge transfer stainless steel pump from Colletion 1. All the pumps are submersible,Kindly confirm.
tank to the Sulphide oxidation and Unpurified collection tanks with Capacity
4.0m3/hr - 1.4 bar (stanby and duty) with density not more 1150kg/m3 as 2. If submersible type, kindly confirm weather
D
manufactured by Flygit/Grundfos complete electric wiring approximate 30m the pumps are cutter or non cutter.
from power room,valves, control panel, isolators, control cable, automatic 3. Kindly confirm the MOC of the
coupling and other accessories to enable pump to work. pump
Ditto but with capacity 4.0 m3/hr - 1.4bar (duty and standby) from Collection
E
tank to the Chrome recovery and Unpurified collection tanks.
Ditto but with capacity 10.0 m3/hr - 4bar (duty and standby) from Unpurified
F
water mixing tank to the Homogenize Diffussed Air Aeration tank
Ditto but with capacity 10.0 m3/hr - 4bar (duty and standby) from Homogenize
G
Diffussed Air Aeration tank to the Coagulation tank
Ditto but with capacity 10.0 m3/hr - 4bar (duty and standby) from Coagulation
H
tank to the Flocculation tank
Ditto but with capacity 10.0 m3/hr - 4bar (duty and standby) from Flocculation
J
tank to the Vertical Precipitator No. 1 tank
Ditto but with capacity 2.4 m3/hr - 3bar (duty and standby) from Sump tank no.
K
1 to the Vertical Sludge Concetration tank
Ditto but with capacity 2.4 m3/hr - 3bar (duty and standby) from Sump tank no.
L
2 to the Centrifugal Sludge Dewatering Machine
Ditto but with capacity 5.0 m3/hr - 2.4bar (duty and standby) from Wetland
M
Sump tank to the irrigation/ETP facilities and To the main central sewerage.
DOSING PUMPS
Digital dosing pump with capacity 10L/hr-4 bar (Head maximum) turn down
ration 1:1000, vavle ball, power 22w, complete with electrical cable from power
1. Asia LMI make can be approved
N room to machine approximately 45m length, control panel, isolators, control
2. Kindly confirm the MOC of pump
cable and other associated accessories. The pump installed at chrome
recovery tank for Magnesium Oxide
Ditto with capacity 30L/hr-7bar turndown ration 1:3000, power 55w.The pump
O
installed near Flocculation tank for Iron II Sulphate agent
Page 5/8/2 TO COLLECTION
Ditto with capacity 30L/hr-7bar turndown ration 1:3000, power 55w. The pump
A
installed near Coagulation tank for lime agent
Ditto with capacity 10L/hr-3bar turndown ration 1:1000, power 22w.The pump
B
installed sludge concetration tank for chemical agent
DOSING TANKS
D Ditto but with capacity 200litres for Iron II Suplhate for Flocculation tank
E Ditto but with capacity 200litres for Lime agent for Coagulation tank
F Ditto but with capacity 200litres for Chenical agent for sludge concetration tank
MIXER
Stainless steel-AISI316L mixer agitator, geared type with speed 350rpm
(maximum), capacity 5,000 litres, shaft seal, impleller diameter 900mm, shaft
length 2000mm, power inputs 3.5kW, electrical cable approximate 30m length,
G Kindly confirm the SS Rod make
control panel, control cable, isolators complete with all associated accessories.
The unit to be installed in the Chrome recovery tank, manufactured by
Greaves/Prodomix.
H Ditto with same size and to be installed in the Suphide Oxidation elevated tank
J Ditto with same size and to be installed in the Suphide Oxidation small tank
Ditto with size impeller diameter 2400mm and shaft length 2000mmm for the
K
Coagulation tank. The mixer will be installed at the mid of the bridge.
Ditto with size impeller diameter 2400mm and shaft length 2000mmm for the
L
Flocculation tank. The mixer will be installed at the mid of the bridge.
Bridge rotating scraping arm stainless steel 316L, geared box and motor to
cover the vertical precipitator tank No. 1 with 3000mm diameter and 3000mm
tank depth, , precipitator area 28.3m2, sludge treament amount 0.59m3/hr,
M speed ratio 11033, velocity 1-2m/min, electrical cable approximate 24m With bridge or without bridge, Kindly confirm
length, control panel, control cable, isolators complete with feed well, skimming
scraper, scum box, scum port, scum pipe outlet, torque tube, hopper, central
deflector, flight & squeegee, rake units, V type outlet weir
Ditto but for sludge concetrate tank with size 3000mm diameter and 2600mm
N
tank depth.
Supply, install, test and commissioning transfer pipes to the ETP equipments
B with Geberit HDPE pipes with 200mm diameter, elbow, reducer, Tee,
connectors etc
VALVES
Supply and fix 200mm dia. Stainless steel 316L Stop valves with hand
K Fully SS or Disc alone SS, Pls confirm
wheel/level. The valves should comply with the ETP chemical specifications.
AIR BLOWER
Air blower screw positive displacement with capacity 384m3/hr - 700Pa with 1. Kindly confirm the motor efficiency
variable speed divice (VSD), noise enclosure, IP 65, control panel, control (IE2,IE3,IE4)
D
cable, electrical cable approx. 62m length, isolator and all other associated 2. MOC of submerged and non
accessories. submerged air piping, Pls confirm.
AIR DIFFUSERS
Air diffuser disk type with size 300mm diameter, working air flow 4m3/hr,
bubble size 2mm, cover service area 0.75m2/piece, oxygenate capacity
0.5kgO2/hr, water submerged depth 3m, theoritic dynamic efficiency 6.5
E
kgO2/kw.h, EPDM/silicon membrane, ABS support plate marerials complete
with non-return valve, flant seal, ring, pipe and diffusser supports and other
associated accessories.
CHEMICAL MONITOR
F Allow for PH monitor to the flucculation and coagulation tank Type of monitoring as online?
G Ditto for Manganese sulphate
H Ditto for Aluminium Chloride and polyelectrolyte
J Diito Iron Suphate
CHEMICAL TREATMENT
Allow for chemical treatment for ETP system for one year (12 complete Operation of the plant or only chemical supply
K
process) for one year, pls confirm
CLEAN EQUIPMENT
L Allow for the following clean equipments:
Heavyduty wheelbarrow with operational load of 150kg
Shovel, trowel, spade, rake with handle and broom with handle, gloves