Professional Documents
Culture Documents
LL1-0 89kN
LL1-0 89kN
LL1-0 89kN
Geometry:
Supports:
Edge supports:
from-to kind of supports
1 2 w,phi,theta : fixed - u,v : free (simply supported and clamped)
Spring supports:
----- position ---- ------------ rigidity ---------
Package layer x y z Cx Cy Cz
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: 03-JLT CASE-3 - LL1-0.89kN 03-04-2024 Page: 2
Layers:
Mechanical properties:
Package layer e-mod. poiss thickn. density alpha t dT prestressing
N/mm² - mm kg/m³ 1/K K N/mm²
1 3 70000.00 0.23 12.00 2550.00 1.0000e-005 0.00 88.00
1 2 9.15 0.50 1.60 1070.00 8.0000e-005 0.00 0.00
1 1 70000.00 0.23 12.00 2550.00 1.0000e-005 0.00 88.00
Loads:
Concentrated loads:
Package x y Fx Fy Fz lx ly
mm mm N N N mm mm
1 750.00 1100.00 0.00 0.00 890.00 100.00 100.00
Face loads:
(constant distributed):
Package pressure
N/mm²
1 0.00000e+000
Dead weight:
Direction vector of gravity acceleration [9.81 m/s²]:
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: 03-JLT CASE-3 - LL1-0.89kN 03-04-2024 Page: 3
Vx Vy Vz
0.00000 -1.00000 0.00000
Calculation approaches:
Calculation results:
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: 03-JLT CASE-3 - LL1-0.89kN 03-04-2024 Page: 4
- N/mm² (Fz) N
1 1.338 (max) 897.74
-0.114 (min)
Extreme values:
x y stresses
mm mm N/mm²
750.00 1095.00 1.338 (max)
750.00 945.00 -0.114 (min)
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Max. Displacement Contour
Allowable deflection of Glass Balustrade = L/30 or 30mm Max as per Table 7.1 of AS1288:2006
From the above, the maximum stress is 0.37 MPa < 73 MPa. Hence Safe
Max. Stress Contour-Layer 1
From the above, the maximum stress is 0.57MPa < 73 MPa. Hence Safe