Professional Documents
Culture Documents
Me 11
Me 11
REPORT OF CALIBRATION
Test Service Request No. : ISATU-JPSME-052023-0001-0002-1T-0549-0817
Sample Description
Date Submitted : 08 May 2023 Type : Liquid-In-Glass (LIG)
Date Calibrated : 11 May 2023 Thermometer
Date Reported : 18 May 2023 Range : -40 °C to 50 °C232 °C
Submitted by : WXYZ Corporation Resolution : 2 °C °C
Address : La Paz, Iloilo City, Iloilo Serial No. : 0200
Page : Page 1 of 1 Make : Plastic
REPORT:
This certifies that the above Liquid-In-Glass (LIG) Thermometer was calibrated using
reference standard traceable to SI units through the DOST-ITDI National Metrology Laboratory using
CMP-002 in accordance with OIML R 133 Edition 2002 (E). The above thermometer was examined
by the Metrology Laboratory by performing calibration on the following test points:
Test Instrument Correction,
Temperature, ° C
Measured Value, ° C °C
6.95 6.00 + 1.0
44.07 41.67 + 2.4
ENVIRONMENTAL CONDITIONS:
Temperature Before Test Relative Humidity Before Test
2424.5 °C 59.0 %
Temperature After Test Relative Humidity After Test
2323.3 °C 62.0 %
STANDARD USED AND TRACEABILITY:
Name of Standard Issuing Lab/Traceability
LIG Thermometer SN 1245 DOST-ITDI-NML-DOST VI
REMARKS:
1. The test instrument measured value is the average of three (3) readings.
2. A positive correction is to be added to the test instrument indicated value and a negative correction
subtracted to give true temperature.
4. The above results were those obtained at the time of the test and refer only to the instrument calibrated.
5. The user should determine the suitability of the object for its intended use.
6. This report shall not be reproduced in any form, except in full, without the written approval of the ISAT U
Metrology and Calibration Laboratory.
7. This Calibration Report is provided for educational purposes only and is not a substitute for any legal
documents.