Professional Documents
Culture Documents
BFCN-4800
BFCN-4800
BFCN-4800
• Mobile
• Military and Commercial Electrical Specifications1,2 at 25°C
Specification Definition Parameter F# Frequency (MHz) Min. Typ. Max. Unit
Center Frequency — 4800 MHz
Pass Band Insertion Loss F1 - F2 4400 - 5200 — — 2.0 dB
INSERTION LOSS (dB)
Maximum Ratings
Functional Schematic
Operating Temperature -55°C to 100°C
Storage Temperature -55°C to +100°C
RF Power Input* 1.5W at 25°C
*Passband rating, derate linearly to 0.25W at 100°C ambient
Permanent damage may occur if any of these limits are exceeded.
BFCN-4800+ BFCN-4800+
INSERTION LOSS (Full Band) INSERTION LOSS (Pass Band)
0 0.0
INSERTION LOSS (dB)
20
0.5
40
1.0
60
1.5
80
Top View
100 2.0
0 2000 4000 6000 8000 10000 12000 4400 4600 4800 5000 5200
FREQUENCY (MHz) FREQUENCY (MHz)
BFCN-4800+ BFCN-4800+
VSWR GROUP DELAY
Bottom View 500 0.40
GROUP DELAY (nsec)
400 0.36
300 0.32
VSWR
200 0.28
100 0.24
Mini-Circuits
®
BFCN-4800+
WZ/CP/AM
190725
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 1 of 2
Bandpass Filter BFCN-4800+
Full Band Performance Pass Band Performance
Frequency Insertion Loss VSWR Frequency Insertion Loss Group Delay
(MHz) (dB) (:1) (MHz) (dB) (nsec)
Pad Connections
Input 1 (ON TOP)
Output 3
Ground 2,4
(ON TOP)
Product Marking: BB
Outline Drawing Demo Board MCL P/N: TB-270+
Suggested PCB Layout (PL-137)
PCB Land Pattern
(ON TOP)
(ON TOP)
Suggested Layout,
Tolerance to be within ±.002
H J K L M N P wt
.087 .024 .122 .024 .087 .012 .071 grams
2.21 0.61 3.10 0.61 2.21 0.30 1.80 .020
Suggested Layout,
Additional Notes
Tolerance to be within ±.002
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s
applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
please
B. Electrical specifications andvisit Mini-Circuits’
performance website
data contained at specification
in this www.minicircuits.com/MCLStore/terms.jsp
document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2