Professional Documents
Culture Documents
10392-TDC Scan
10392-TDC Scan
This speciflcalon used for purchase of Mild steel Plates according io ASME Sec. ll Ed.
1 Scope
2023.
2 Specification Material according to SA-36/Equllant (SS-400) & SA-6/6M of ASME Sec ll Part-A Ed.2023
A
Shall be in accordance with ASME Section ll, 54-6 clause 12 & Table A1.1 (Out of
fimensional Tolerance
Tolerance not Allowed).
7 Chemical Composition As per ASME Sec ll 54-36, Table 3 of ASME Sec ll Part-A Ed. 2023.
8 Mechanical Properties \s perASMF Sec ll 5A-36, Table 2 of ASME Sec ll Part-A Ed. 2023.
f plates are according to ASTM A36 then Ed. Of ASTM shall be comply with Mandatory
I ASTM Edition
{ppendix Tab{e ll-200-1 of ASME Sec ll Part A Ed. 2023
tdaterial Marking Acmrding to SA-6/6M Clause 18 of ASME Sec ll Part-A Ed. 2023.
II Certiflcation Requirement AccordinE to SA-5/6M Clause 14 of ASME Sec ll Part-A Ed- 2023.
?EMARKS:
ffiWr%
a
tlame of material
TECHN}CAL DELIVERY CONDITIONS
This specjflcailon used for purcnase of Miid steel Plates according to ASME Sec. ll Ed.
1 Sccpe
2A23.
2 Speciilcation fiIaterial according to 5A-36 and 5A-6 cf ASlvlE Sec Il Part-A Ed.2023
5 Dimensional Tclerance Sha,l be in accordance wth ASME Sec ll, 5A-6 clause '12 (Out of Tolerance not Aliowed).
7 ihemical Compositicn As per ASME Sec il 5A-36, Table 3 of ASME Sec Il Part-A Ed. 2023.
\ilechanical Properties As per ASME Sec ll 5A-36, Table 2 cf ASMS Sec ll Pad-A Ed. 2023.
o f plates are according to ASTM A36 fien Ed. of ASTM shall be comply with Mandatory
ASTM Editi0n qppenciix Table ll-200-i of ASME Sec ll Part A Ed. 24221
10 h/aterial Marking qccording to SA-6/6M Clause 18 of ASirfiE Sec ll Pa(-A Ed. 2023.
11 Certifi cation Requirement According to SA-616M Clause 14 l)f ASME Sec ll Part-A Ed. 2423.
REMARKS:
'llY
KW eur V
&
Name of material
TECHNICAL DELIVERY CONDITIONS
1 Scope Ihis specifjcation used for purchase cf SMLS Pipe according to ASME B31.3, Ed.2A22.
l4aterlal according to SA-106, SA 530 (General requirements) of ASME Sec ll Paft-A Ed.
I Speciflcation
2023
Tolarances shall be follow according to SA-106, SA 530 of ASME Sec ll Part-A Ed.
5 Dimensional Tolarance
2023.(Oui of Tolerance not Allowed).
7 Chemical Composition qs per SA-106 Clause 7, Table 1 of ASME Sec ll Part-A Ed.2023..
I Nrechanical Properties qs per SA-106 Clause 10, Table 2 of ASME Sec ll Part-A Ed.2023..
lf flanges complies with ASTM A-106 than Ed. of ASTM shall be comply with Mandatory
9 ASTM Edition
Appendix ll Table ll-200-1 of ASME Sec ll Part-A Ed. 2023.
10 Material Marking Required as per SA-106 Clause 25 & SA-530 Clause 26 of ASME Sec ll Part-A Ed.2a23.
11 lertification Rquirement Required as per A530 Clause 23 of ASME Sec ll Part-A Ed. 2023
12 {ydrostatic Test / NDE Pipes shall be hydrostatic test according to SA 106 Clause 13 and SA 530 Clause 22.
REMARKS:
ffi./f {WeY
& TECHNICAI- DELIVERY CONDITIONS Annexure B
1 Thls speciflcation used for purcnase cf Flanges accordinE to.qSME 831.3, Ed. 2022.
Tolarances snall be foilow according io ASME 81s.5 Ed. 2020 (Out of Toieranc€ not
6 ]imensional Tolarance
Allowed).
Heat Treatment as per SA-105 Clause 6 & 5A-961 Clause 7 of ASME Sec ll Part-A Ed.
7 Delivery Condition
2023
I Chernical Ccmposii:on As per A'1 05 Clause 6 Table 1 cf ASME Sec ll Part-A Ed. 2023.
9 Ulechanical Properiies \s per SA-1 05 Clause 7, Table 2 of ASME Sec il Pa[-A Ed. 2a23.
f flanges complies with ,ASTM A 105 than Ed. of ASTM shail be comply with Mandatory
10 ASTM Edition qppendix ll Table ll-200-1 of ASME Sec ll Part-A Ed.2.023.
1t I\raterial Marking qs per SA-105 Clause 15 & 5A-961 Clause 20 ofASME Sec ll Part-A Ed. 2023
12 Certitication Rquirement Required as per 5A-961 Clause 1s of ASME Sec li Parl-A Ed. 2a23
REMARKS:
.ry,* WMY
t" TECHNICAL DELIVERY GONDITIONS Annexure B
1 ScoDe This specification used for purchase of BW fittings according to ASME B31.3, Ed.2022.
Material according to SA 234 and SA 960 (Ccmmon F{equiremets), ASME Sec ll Pa(-A Ed
2 Speciflcai;on
Tolarances shall be follow according to ASME 816.9 Ed. 2018 (Out of ToleTance not
Dimensional Tolarance
Allowed).
Heat Treatment as per SA-234 Clause 7 and 5A-960 Clause 7 ofASME Sec ll Part-A Ed.
6 Deiivery Condition
2023
7 Chemical Ccmposition Shall be as per SA-234 Clause 8 Table 1 of ASME Sec ll Part-A Ed. 2023.
8 Mechanical Propedies Shall be as per SA-234 Clause g Table 2 of ASME Sec ll Part-A Ed.2023.
if fittings is according to ASTM 4234 then Ed. Of ASTM shall be comply with Mandatory
I ASTM Edition
Appendix Table ll-200-1 of ASME Sec ll Part A Ed.2023
.10
lv'laterial Mar](i',9 AS per SA-234 Clause 1 I and 5A-960 Clause 19 ot ASME Sec ll Part-A Ed. 2023.
11 Certiil :ionRequirement AS per SA-234 Clause 18 and 54-960 Clause 20 of ASME Sec ll Part-A Ed. 2A23.
ffXoY
& TECHNICAL DELIVERY CONDITIONS Annexure B
1 Scope This sDecification used for purchase of Fittings according tc ASME 831.3, Ed. 2022.
2 Spec!flcation Material according to SA-105, SA 788 (General requirements) and SA 961 (Common
requirements) of ASME Sec ll part-A Ed 2023
E
Dimensional Tolarance Tolarances shall be fottow according to ASME B1 6.1 1 Ed. 2023 (orit of rolerance not
Allowed).
b Delivery Condition Heat Treatment as per 961 Clause 7 of ASME Sec ll part_A Ed.2A23
7 Chemical Compcsition qs per A1 05 Clause 6 Tabte 1 of ASME Sec ll part-A Ed. 2023
8 Vlechanical Properties As per SA-105 C,ause 7, Table 2 of ASME Sec ll part-A Ed. 2OZ3
9 ASTM Edition lf flanges complies with ASTM A 105 than Ed. of ASTM shall be compty with Mandatory
Appendix ll Table tl-200-1 of ASME Sec lt part-A Ed.2OZ3
11 Certification Rquirement Required as per A961 Clause 19 of ASME Sec il part-A Ed. 2A23.
REMARKS:
-wW
Prepared By (Design Engineer) Reviewed and Approved By (UC eA/eC)
& TECHNICAL DELIVERY CONDITIONS Annexure B
Name of material Carbon Steel Stud bolts & Hex Nuts Manufacturer SR.No:
Job No. 't 0392 Rev No; 0
Item Description. Piping Works PARCO MKT Drawinq:
TDC No. 10392-TDC-07
1 Scope This speciication used fcr purchase gi tsolts according to ASIT E 831 .3, 2A22
=d.
2 Material Specification Material acccrding to SA-193 Gr. 37 and SA-'194 2H cf ASME Sec ll Part-A Ed.2A23
4 fhread Requirement Ihreads of studs and nuts shall be i'leavy Hex Series and comply with UNC respeclively.
5 )irnensional Tolerance According to ASME Bi 8.2. 1 Eci. 2012IASME 31.1 Ed 2019 {Out of Tolerance nol Allowed).
Tempeing temperature required ior studs at mini. 593"C (SA- 1 93 Table 3) and for nuls
6 Heat Treatment
mini. 540"C. (SA-194 Clause B)
For Boli, all chemical anC rnechaF,ical properiies meets the requirments of As per SA-193
7 Chemical Composition & lrechaoical Properties GL g7 Iable'1 & Table 2 respecively of ASME Sec il Part-A Ed. 2023.
For Nut, only chemical analysis n€ei SA-194 Table 1 of ASIVE Sec ll Part-A i.d.2a23.
'5olls
8 iJardness Test Acccroing to SA 1 93 Table 2 ior and SA 194 Table 2 for nuts
I Proof Test Proof test requrred as per SA 194 (Cnly fol Nuts)
if bchs is according to ASTM 4193 and A194 then Ed. Of ASTM shall be comply with
10 \STM Edition -fable il-2c0-1 # ASME Sec il Part A ed.2023
Ma8dato,ry Appendrx
12 Sertification Req uirement qccording to 34-962 Clause 19 of ASME Sec ll Part-A Ed.2023.
REMARKS;
tr Y'*%
#
Name of material
TECHNICAL DELIVERY CONOITIONS
1 Scope This speciflcaticn used for purchase of Gaskets according to ASME B31.3, Ed. 2022.
4 Additional Requirements Compressed, Centered ring, Graphite filled, RF, Style CG type
Dimension are according to ASME 816.20 Ed 2023 (Table SW-2.'1-1 & 816.5 Ed 2020.(Out
5 Dimensional Tolerance
of Tolerance not Allowed).
o Delivery Condition
7 Chemical Composition
8 lvlechanical Properties
f gaskets is according to ASTM A240 then Ed. Of ASTM shall be comply with l\randatory
9 ASTM Edition
\poendix Table ll-200-1 of ASME Sec ll Part A Ed. 2023
11 Certification Requirement
TEMARKS:
ry
Prepared By (DJS'g'l
///
EnSiny\ Reviewed and Approved By (l/C aA/aC)
t$wy