Professional Documents
Culture Documents
Temperature Rise Test
Temperature Rise Test
A8006941
The results reported in this document relate only to the tested equipment.
Partial reproduction of this document is permitted only with the written permission from CESI.
CESI Via R. Rubattino 54 Capitale sociale 8 550 000 Euro Registro Imprese di Milano
Centro Elettrotecnico 20134 Milano - Italia interamente versato Sezione Ordinaria
Sperimentale Italiano Telefono +39 022125.1 Codice fiscale e numero N. R.E.A. 429222
Giacinto Motta spa Fax +39 0221255440 iscrizione CCIAA 00793580150 P.I. IT00793580150
http://www.cesi.it
CESI
A8006941
Tests witnessed by
Mr. Sebastien Lepage METAL DEPLOYE RESISTOR
Mr. Mohammad Khalid Raza, FEWA
Mrs. Hend Ahmed Khameis Mohamed FEWA
Only for laboratory requirement, in order to reproduce the test conditions, all the laboratory data are contained in the
document marked: —
The measurement uncertainties of the test results reported in the document are the following:
voltage: ± 5 % ; current: ± 5 % ; time: ± 5 % ; temperature: ± 2 °C
The measurement uncertainties are estimated at the level of twice the standard deviation (corresponding, in the case of
normal distribution, to a confidence level of about 95 %) and have to be considered as maximum values.
Laboratory information
Activity code
D1001IG
CESI
A8006941
M1059IG
CESI
A8006941
D1109IG
D1122IG
Temperature-rise test
Test circuit : See d0046 Frequency : 50 Hz No-load voltage : 22,0 kV
were:
Δt = Temperature
Rt = Hot resistance
R0 = Cold resistance
α = Temperature coefficient of the stainless steel resistor equal to 0,00146 supplied by the Client.
The values of Rt and R0 have been calculed from the ratios of voltage across the resistor and the test current at the beginning and at the end of the test.
Condition of the apparatus after the tests: After the test, the apparatus did not show any sign of damage see photos 4 and 5.
A8006941
Test Report CESI Approved Page 5
CESI
A8006941
Resistance variation
24
22
20
R (ohm)
18
16
14
12
10
0 2000 4000 6000 8000 10000
time (ms)
D1089IG
CESI
A8006941
Symbols used in this diagram are the same as those on the oscillograms.
D0046IG
CESI
A8006941
D8013IG
CESI
A8006941
Photo no. 1
Photo no. 2
M2009IG
CESI
A8006941
Photo no. 3
M2009IG
CESI
A8006941
Photo No.4
After the test
Photo No.5
After the test
D1091IG
CESI
A8006941
X-14-1 mΩ
X-14-2 Ω
TA 14-1 ratio K
Supply
C-MT (C-30) nF
R-MT (R-30) Ω
CM (capacity) μF
Connection / Neutral S-D / T-I
R (resistance) of test object Ω 13,2
No.
Transformers
Circuit
K
Neutral condition T–I
R (resistance) Ω
Connection / Neutral S-D / T-I
X (reactance) Ω
Load
D1094IG
CESI
A8006941
Additional instrumentation:
D1095IG
CESI
A8006941
Laboratory P140
Measuring system characteristics
D1229IG
I 2 kA
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R 5 kV
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5
R5V
U 20 kV
HandleZoomsIn
F1 F2 F3 F4 F5