Professional Documents
Culture Documents
LP 2 PDF
LP 2 PDF
LP 2 PDF
I. OBJECTIVES:
At the end of the lesson, the students should be able to:
1. enumerate the procedure in creating straight through cable,
2. perform the procedure in creating straight through cable, and
3. value the importance of following the procedure in creating straight through cable.
b. References
i. Cabling, http://k-12.pisd.edu/currinst/network/if1_3st.pdf
ii. LAN Wiring and Pin Out,
http://www.zytrax.com/tech/layer_1/cables/tech_lan.htm
iii. Ethernet Cable Color-Coding Diagram, http://www.incentre.net/ethernet-wiring-
diag.html
iv. Competency-Based Module (CSS) pp. 93-98 (TVE Module) Competency-Based
Module in Computer Hardware Servicing pp. 104-109
v. https://ikstudiesseries.blogspot.com/2017/11/full-procedure-how-to-make-your-
own-Ethernet-cable.html
III. PROCEDURE:
1. PREPARATION
a. Preliminaries
i. Opening Prayer
Everybody, please stand for a prayer to be led to Our father in heaven holy be thy name your
us by Rolene. kingdom come thy will be done in earth as it is
in heaven give us this day our daily bread and
forgive us our sins as we forgive those who
trespass against us. Do not bring us to the test
but deliver us from evil. Amen.
ii. Customary Greetings
Good afternoon class! Good afternoon Sir!
Before taking your seats, pick up the scattered (Students arrange their chairs and pick up
papers under your chairs and be sure that your some scattered papers.)
chairs are properly aligned.
You may now take your seats. Thank you Sir!
Page | 1
b. Review
Let us first recall our previous lesson, last meeting
we discussed about the tools for installing LAN
Cable.
I’ve got here some pictures of the tool. Kindly
identify its name and function.
Unshielded Twisted-Pair (UTP) Cable - most
common cable used in computer networking.
c. Motivation
Page | 2
Did you know class, according to Glassdoor.com,
an IT expert has an average annual salary of
$68,473 and that’s equivalent to P3,461,692.91. Wow!
So, in this classroom we will learn how to create
LAN cabling.
So, are you ready? Yes, Sir!
2. LESSON PROPER
Presentation of Lesson
Our lesson for today is all about LAN Cabling.
Let’s read first our lesson objectives for today.
Thank you!
Unlocking of difficulties
Thanks!
Before we have our activity, let’s have a video (The student will watch the video.)
about the procedure in creating a straight
through cable.
a. Activity
i. Pre-Activity Ok Sir!
(The class will be grouped into three by counting
off. The teacher will distribute the activity card to
the group’s leader.)
Page | 3
Safety Precaution:
Safety Precaution: o Avoid Horse Playing
o Avoid Horse Playing o Use The Tool Properly
o Use The Tool Properly o Always Be On Task
o Always Be On Task o Be Vigilant
o Be Vigilant
Ok, Sir!
Remember, I will give you 15 minutes to do your
task. You may proceed to your respective group
now.
b. Analysis
Straight Through Cable is used in Local Area
Network (LAN) to connect PC to a network hub
or router.
RJ45 connector, UTP Cable, Wire stripper,
What are the tools and materials used to create crimping tool, LAN Tester
Straight Through Cable?
Trim the end of the cable to ensure the ends of
What is the first step in creating Straight Through wires are even.
Cable? Yes, Joseph.
Good!
Crimping tool or Scissors
In trimming the UTP cable what tool will we use?
Maddie?
Exactly!
(The student will do the step 1.)
Who would like to do the first step in front of the
class? Chesna?
That’s it!
Strip off approximately 1 inch of the cable’s
Tell me the next procedure. Gal, please. jacket.
Very good!
Wire stripper
What tool will we use? Deon, please.
Correct!
(The student will do the step 2.)
Who would like to do the second step in front of
the class? Lucas?
Great!
Separate the 4 twisted wire pairs from each
What is the third step? Yes, Blast. other, and then unwind each pair, so that you
Very good! end up with 8 individual wires. Flatten the wires
out as much as possible, since they’ll need to
be very straight
for proper insertion into the connector.
Page | 4
Can you tell me the color order? Yulissa? Pin 1: Orange & White
Very good! Pin 2: Orange
Pin 3: Green & White
Pin 4: Blue
Pin 5: Blue & White
Pin 6: Green
Pin 7: Brown & White
Pin 8: Brown
Who would like to arrange the color code in (The student will do it.)
order? Yes, Pema.
Cool!
What is the fifth step? Turner. Use wire cutter to make a straight cut across
Correct! the wires 1/2 inch from the cut sleeve to the
end of the wires.
Who would like to try? Yes, Aphrodite. (The student will do it.)
Awesome!
What is the sixth step? Lex. Hold the RJ45 connector so that its pins are
Correct! facing away from you and the plug-clip side is
facing down, carefully insert the wires into the
connector. Each wire fits into a slot in the RJ45
connector.
Who would like to try? Yes, Namie. (The student will do it.)
Awesome!
Can we reuse the RJ45? Why? No, you never should reuse a crimped RJ45.
They are made for exactly one-time crimp and
if this crimp fails you should always use a new
Exactly! crimp connector
What is the eight step? Yes, Anthony. Insert the prepared connector/cable assembly
Awesome! into the RJ45 slot in your crimping tool. Firmly
squeeze the crimper’s handles together until
you can’t go any further. Release the handles
and repeat this step to ensure a proper crimp.
Who would like to try? Yes, Menj. (The student will do it.)
Awesome!
And the last step? Yes, Aza. After completing the fabrication on the first
Good! end of the cable, repeat all steps on the
opposite end of the cable.
How would we know if our LAN Cable is working? Test the cable using the LAN Tester.
Yes, Ferny.
Exactly!
Why do we need to test the LAN cable first Always take into considerations that before
before connecting it to actual devices? Yes, using the cable in connecting actual devices.
Besaida. It is suggested that you must use a LAN tester
first to check the functionality of the cable.
Page | 5
c. Abstraction LAN Cabling is a process of creating LAN
As a sort of recap, what is LAN Cabling? Cable which is used in interconnecting
computers.
What are the devices that uses Straight-Through Straight-through cable is used to connect
cable wiring? computers, printers and other network client
devices to the router switch or hub.
What is the procedure in creating a straight The steps in creating a straight through cable
through cable? are:
d. Application
The teacher will show a Facebook meme about (different responses)
LAN Cabling, and let the student share their
thoughts about it.
Thank you!
IV. EVALUATION (Multiple Choice)
Directions: Directions: Read each item carefully and answer the following questions. In a ¼ sheet of
pad paper, write the letter of the correct answer.
1. Lorry crimps the inserted wires into RJ45 plug. Which tool must he use?
A. Lan Tester B. Crimping tool C. Screwdrivers D. Wire stripper
2. Which is the correct color order for straight through LAN Cable?
A. Orange-White/Orange-Green-White/Green-Blue-Blue\White-Brown-Brown/White
B. Blue-Blue\White-Brown-Brown/White- Orange-White/Orange-Green-White/Green
C. White/Orange-Green-White/Green\ Blue-Blue\White-Brown-Brown/White- Orange
Page | 6
D. White/Orange- Orange- White/Green- Blue-Blue\White- Green- Brown/White-Brown
3. Cheryl separated the four twisted wire pairs from each other and unwind each pair. What
should she do next?
A. Insert all the wires into RJ45 plug
B. Trim all the wires to the same length
C. Test the wire’s resistance and current
D. Align the wires according to the specific orders
4. Before Ven connects the LAN cable from WIFI router to computer. What must he do first?
A. Prepare all the materials needed
B. Insert the wired plug into its ports
C. Test the cable using the LAN tester
D. Carefully remove the outer jacket of the cable
IV. Assignment:
A. Follow-up Assignment.
1. What is roll over cable?
2. Identify the function of a roll over cable.
B. Advanced Assignment.
1. What are internet protocols?
2. Identify and describe the different protocols used in networks and internet.
Page | 7
ACTIVITY SHEET
Objectives:
Materials:
• UTP Cable
• RJ45
• Crimping Tool
• Wire Stripper
• LAN Tester
Procedure:
Guide Questions:
1. What problem/s have your group encountered while performing the procedures?
2. How did you solve this/these problem/s?
3. Explain the importance of knowing the proper procedures in performing a Straight-Through
Cable Fabrication.
Page | 8
Page | 9
Criteria 3 2 1 TOTAL
Able to Able to Wasn’t able to
complete the Complete the complete the task.
Accuracy
task correctly. task with error
resolved.
Systematically Systematically Cannot follow the
Adherence to the follow the steps follow the steps steps prescribed.
procedure prescribed all prescribed
the time. sometimes.
Observed the Observed the Did not observe
safety safety the safety
Workmanship (Applied
precaution precaution precaution
Safety Precautions
prescribed all prescribed prescribed
the time. sometimes.
Able to finish the Able to finish the Unable to finish the
task ahead of task a minute task.
Speed
time after the given
time.
TOTAL
Score:
Page | 10