Professional Documents
Culture Documents
Strength of Materials: A L A L B B
Strength of Materials: A L A L B B
Strength of Materials: A L A L B B
ECP 202-20
Strength of Materials Ceiling Dim. of Footing to (cm) 10
Y
Forces
Working Axial Load Pw (ton) 130.00
Working Moment M(y-y)w (t.m) ⸺
Fact = 33.91 (t/m2) Fact = 33.91 (t/m2)
Working Moment M(x-x)w (t.m) ⸺
⇒ Flextural Design
Ultimate Axial Load Pu (ton) 195.00
Ultimate Moment M(y-y)u (t.m) ⸺ X Direction : Y Direction :
Ultimate Moment M(x-x)u (t.m) ⸺ Critical Section Of Bending at Z1 1.00 Critical Section Of Bending at Z2 1.00
Bending Moment (Mact,y) (t.m/m) 16.96 Bending Moment (Mact,x) (t.m/m) 16.96
Factor C1 7.316 Factor C1 7.316
Factors From Chart Get Factor J 0.826 From Chart Get Factor J 0.826
Strength Factors (c) For Concrete 1.5 From Chart Get Factor C/d 0.125 From Chart Get Factor C/d 0.125
Strength Factors (s) For Steel 1.15 Calculate Cmax/d 0.438 Calculate Cmax/d 0.438
For (Ultimate / Working) Load Factor 1.5 Calculate C1Min 2.783 Calculate C1Min 2.783
Check (Minimum Depth) For Moment Safe Check (Minimum Depth) For Moment Safe
Check (Minimum Depth) For Shear Safe Check (Minimum Depth) For Shear Safe
⇒ Check Punching
Y Critical Section Perimeter (bo) (m) 3.800 Punching Force (Qpunching) (ton) 164.73
LP.C = 3.1 (m)
Critical Section Area (Ao) (m2) 0.893 Punching Shear Stress (qPu) (Mpa) 0.788
Punching Shear Area (Ap) (m2) 2.090 Allowable Punching Shear Stress
1.413
Check (Minimum Depth) For Punching Safe For Concrete (qp,cu) (Mpa)
6 Ø 16 /m
BP.C = 2.9 (m)
X X
⇒ Reinforcement Of Footing
6 Ø 16 /m
Reinforcement Area (Asx) (mm2/m) 1036.792 Reinforcement Area (Asy) (mm2/m) 1036.792
Min Reinforcement Area (Asmin) 916.667
LR.C = 2.5 (m)
(X-X) Direction : 6 Ø 16 /m
Y
(Y-Y) Direction : 6 Ø 16 /m