Professional Documents
Culture Documents
Antena Single Band DataSheet - DI-065R16M - TS - New
Antena Single Band DataSheet - DI-065R16M - TS - New
DI-065R16M
X Pol, 65°Horizontal Beamwidth
690-960MHz
16.3dBi, E-Tilt: 0-10
Integrated RCU
Electrical Specifications
R1 690-960
Frequency Range (MHz)
690-824 790-894 880-960
Polarization ±45°
Electrical Downtilt (°) 0-10
Over All Tilts 15.4±0.5 15.7±0.4 16.1±0.5
Min Tilt 15.6 15.9 16.3
Gain (dBi)
Mid Tilt 15.4 15.7 16.1
Max Tilt 15.2 15.5 15.9
Horizontal Beamwidth (°) 74±4 69±4 67±4
Vertical Beamwidth (°) 11.0±1.0 10.2±0.8 9.3±0.7
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥16 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥18 ≥17
Front-To-Back Ratio, 180°±30° (dB) ≥24 ≥25 ≥24
Cross-polar Discrimination@0° (dB) ≥22 ≥22 ≥24
Cross-polar Discrimination over Sector (dB) ≥10 ≥10 ≥9
Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-153
Maximum Power per Port (W) 400
Impedance (Ω) 50
Lightning Protection Direct Ground
RET Specifications
RET Type Integrated motor, replaceable
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
171x129x34 / 6.7x5.1x1.3
(excluding connector)
Weight (kg) / (lb) 0.55 / 1.21
Connector Position
298
125
Accessories
Model Quantity Description
JM-900DZA 1 Mounting Kit, 0-12° tilt
IRCU-C212 1 Integrated RET Controller