ETASA LOW DEBRIS LINK
The ETASA low debris link was designed
thinking on the need of a link that works
producing less quantity of debris at the moment
of been used and at the same time increasing
the resistance of the link systems used until
today.
These systems are available for 2 1/8” & 1
11/16” diameter in 6 SPF using Piranha Next
Generation shaped charges. The same link can
be phased 45° or 60° with only changing the
orientation during the set up. With only adding a
spacer (the same for both diameters 2 1/8” & 1
11/16”) can be set up for shooting in 4 SPF and
phased 90°.
Also are available for 2 %” diameter in 5 SPF
and phased 60°.
Once set up, the system can get curve until a
radio of 1.5 meters without suffering plastic
deformations, this makes the Rig Up easier.
ase” | 6__ | te3iHnG |_1.42_ | _852__|__1000_|
213" [6 | TG30HNG] _2.17__|__13.02__[__1000_|
[22 [5 |resinnc] 3.05] 15.25 1200 _ |
* Pull Resistance Test are made inclusing a shaped charge inside the Link. Data
ccallactad i for breaking the nk.
Manufactured by: Explosivos Tecnolégicos Argentinos ETA SA
Ruta 25 Km 13 Pilar - Buenos Aires — Argentina
www.etasa.com