Professional Documents
Culture Documents
Technical Drawing S.B.A
Technical Drawing S.B.A
Technical Drawing S.B.A
DRAWING SCHOOL
BASED
ASSESSMENT
PROBLEM STATEMENT
A new housing development has asked grade 11c Technical Drawing
students to produce a number of building plans from a given Floor Plan.
CONDITION
The house is a 110m square Domestic Building consisting of two
Bedrooms, a Bathroom, a Kitchen, a Dining Area, a Living Room, a
Patio and a Porch. This house has two external panel Doors and four
internal Flush Doors. This house has seven casement windows and a Hip
and Gable roof tops with aluminum sheeting tile covering.
DESIGN JUSTIFICATION
The Hip and Gable Roof was chosen for the house because it gives the
house a sophisticated look, grants durability, and protects the inner side
of the house for the elements. The External Panel doors provide security,
and access to the house while casement windows provide adequate light
and ventilation.
MATERIALS
-Sand
-Aluminum Sheeting
-Hinges
-Water closets
-Cupboard
-Gravel
-Nails
-Locks
-Face Basins
-Countertop (Granite)
-Cement
-Paints/Roller/Paintbrush
-Bolts
-Bath Tub
-Water Pipes
-Strap Steel
-Lighting Fixtures (bulbs etc.)
-Mixtures
-Screws
-Electric pipes
-Block
-Windows
-Ceramic Tiles
-Binding Wires
-Lumber
-Doors
-Drainage Pipes
-Kitchen Sink -1/4 Wire
-Electric Wires/Cable
-Panel Box/Breaker
WORKSHOP SAFETY
DESIGN AND TECNOLOGY FAULTY SAFETY CODE
The room/workshop is a much safer place to work if you follow this code:
DRAWING EQUIPMENT
Ruler 18’’ Clear
Triangular Scale
Protractor
Triangular 30/60 & 45 Degrees
T Square
Erasers
Eraser Shield