Professional Documents
Culture Documents
Multibeam Manual
Multibeam Manual
Symptom (public)
Problem (public)
A SATDEFS file is a small configuration file that defines the current C-Nav
Corrections Satellite constellation. The file is uploaded with C-Nav
controller software and refreshes the list of C-Nav Corrections Satellite
available in the satellite selection page. This allows the operator to simply
select a correction satellite from a drop-down list rather than manually
defining one. It is especially useful for discontinued products such as
C-Nav2000, C-Nav1010, and C-Nav2050 receivers.
This functionality was introduced with the following C-Nav controller software
versions:
Solution (public)
Follow the below instructions to update the C-Nav controller software with a
new C-Nav Corrections Satellites Configuration file. After updating the
configuration, the operator should select and apply the appropriate
corrections satellite.
C-Monitor/C-Setup
- In the Main Window, select Update Corrections Satellite Configuration...
from the Settings drop-down menu.
- Press Browse and open the SATDEFS file.
- Press Update to load the new configuration.
- Access the Corrections Receiver page to select a new corrections satellite.
[1] ftp://ftp.cctechnol.com/pub/C-Nav/SATDEFS_2014_10_10
https://cnavotrs.cnav.com/otrs/public.pl?Action=PublicFAQPrint;ItemID=45 Page 1