Professional Documents
Culture Documents
Black Miner F1 Operation Manual
Black Miner F1 Operation Manual
2019.2.19
Content
1.Overview ........................................................................................................................................ 1
1.1 Blackminer F1+ Components ....................................................................................... 1
1.2 Blackminer F1+ Parameter ........................................................................................... 2
1.2.1 Blackminer F1+ Supports Algorithms and Coins..................................................... 2
1.2.2 Physical Parameters ................................................................................................. 3
2. Connecting the Power Supply ....................................................................................................... 3
5. Contact .......................................................................................................................................... 8
I
1. Overview
The Blackminer F1+ is a mining machine which uses advanced FPGA chip as the
main chip. Compared with ASIC chip, high-performance FPGA is programmable and
has more resources, and can adapt to a variety of algorithms. Blackminer F1+ has
very simple hardware configuration and can mine multiple coins. The algorithm
flexibility makes it different from ASIC miners. Through continuously updating,
customers can experience more mining fun while gaining good profits.
*You must provide your own power supply which output is DC12V and power
greater than 1300W.
1
1.2 Blackminer F1+ Parameters
MONA
NIX
ORE
3 Lyra2rev2 RUP 216.0MH/s
STAK
VTC
XVG
4 zp zp 22.0 GH/s
2
* According to the company's R&D plan, support algorithms and coins will be
updated from time to time. Please pay attention to notification on the official
website: www.hashaltcoin.com
b) Connect power supply power cable connectors to each of the 7 PCI‐e connectors
on the top of the F1+ server, ensuring that all the connectors are powered by the
same power supply
c) The switch on the hash board dial to power interface
d) Connect the network cable to the ETH port
e) Take the power supply on
3
3. Setting Up the Server
4
3.2 How to find IP
c) Install and run“IP reporter”
d) Shelf, Step, Position – suitable for farm servers to mark the location of the servers,
Default – suitable for home servers
e) Click “STRAT”
f) Press the “IP report” button until it beeps, then release the button
g) The IP address will be displayed in a window on your computer screen
h) In your web browser, enter the IP address provided. Name and password are all
default“root”
i) In the Network section, you can assign a Static IP address (optional)
j) Click“Save & apply”
5
3.4 Select Algorithm:
a) Choose “Miner Configuration”->” General setting”
b) Click the “Miner General Configuration”, select the algorithm you want from the
drop-down list
c) Input the pool address in URL
d) Input your wallet address in worker
e) Input password in Password if necessary
f) Click the “Save & Apply”, waiting until miner reboot
6
3.6 How to Remove Existed Bit File if Storage is Full
Due to the limitation of the storage, we could not copy all bit file into the miner.
So, if the storage is full, you need to remove existed bit file when update image. There
are two ways to remove existed bit file:
7
cgminer_0xbtc.confg” and “fpgaminer_top_0xbtc.bit”
Restarted without beeping, Check the network, if this can’t work, return to
1
Net lamp not on factory
Arithmetic board has no Make sure the power switch to the net port side
2
electricity and connecting wires inserted properly
If the arithmetic board has green LED on, make
sure that the fan is connected to the interface near
the net port side
2 Beeping
If the arithmetic board has red LED on, please
plug in the connecting wire again. if this can’t
work, please contact us.
5. Contact
Official website address:www.hashaltcoin.com
Email:support@hashaltcoin.com
Discord:https://discord.gg/eUNRSgy
Whatsapp: +86 18612535678