Professional Documents
Culture Documents
Cosme Post Lab Activity 7 Aloe Lotion 1
Cosme Post Lab Activity 7 Aloe Lotion 1
Ingredients
1/2 cup almond oil or jojoba oil (or any other liquid oil)
1 tsp vitamin E oil
1 TBSP shea butter
essential oils of choice
iII. Procedure:
Weigh all the ingredients
Melt the beeswax, almond oil (or other liquid oil), and shea butter (if using) in a double boiler or glass
bowl over a pan of water.
Remove from heat and pour into a blender or beaker (if using an immersion blender).
Let cool to room temperature (25 C). Add the vitamin E (if using) and any essential oils.
Start blending on low using a blender or immersion blender. Very slowly, start adding the aloe vera gel
until incorporated. Use a spatula to wipe down the sides and re-blend a few times until fully incorporated.
Store in a glass jar in the fridge for up to six weeks.
Make 150 ml
IV. Questions:
1. Give the function of each ingredients
2. Write the correct cosmetic formulation for lotion
3. What is the pH level of your formulation?
3. Create & attach your label for lotion
POST lab
Conversion
1 cup= 237ml
1 tsp= 5ml
1 tbsp= 15ml
237 ml alovera
20 ml beeswax
118.50 ml alond/ jojoba oil
5 ml Vitamin E
15 ml shea butter
Let say :
1ml = 1 gram
Formula
w/w% = wt/ total wt x 100
E q.s pH adjuster
total 100%
2. Remove from heat and stir under high shear until smooth
3. Combine phase B to phase A and stir under medium shear while the emulsion cools
METHOD
4. Let it cool at room temperature 25 C.
5. Add Phase C to phase A/ B and stir under medium shear until homogenous
6. Add Phase D to phase A/B/ C and stir under low shear until homogenous emulsion
7. Adjust pH to 5.0-5.5